Now that Phase 1 is done I'm hopeful that I'll be removing the cowling a little less so I decided to install the Baja Design Lights in the front cowl. I used the Baja Design S1

https://www.bajadesigns.com/products/s1-black-led-auxiliary-light-pod/

I created a mounting bracket, glassed it in, connected wires, and glassed them to the cowl to keep them free and clear of any other components.

The wiring that comes with the Baja Design S1 lights is way larger than it needs to be but I decided to keep the factory wiring as it's protected really well and weatherproof sealed. I'll splice in a quick disconnect where it's easy to work with near the firewall connection.

These will connect to a "landing light" switch protected by a 10 amp fuse in the cabin. The GAD 27 allows you to select Wig-Wag above a certain airspeed (programmed via the G3X) so they will wig and wag when in flight then go steady once you hit a certain airspeed. I don't recall what I set mine to but I think it was around 65 kts.