Spent a lot of time just looking at it to see what i want to do. I decided to mount the pitot tube on an inspection panel so i can remove it when moving the wing or during inspetion. So I had to figure out a way to reinforce the panel against flexing, especially since the probe is the Dynon heated probe and pretty weighty.
I cut out a piece of 0.025 6061 T6 and drilled and cut out the pitot tower dewdrop hole. I finished the night by riveting (the solid rivets that Dynon provides) the angle nutplates onto the pitot tower base.
I haven't built the L angle box for it on the wing yet.