Needed to get the wing kit hardware organized and I got a good chunk of that done this evening in a few hours of work. Still have some more to sort and store away. Also spent some time yesterday researching and gathering reference material for the beginning of all the countersinking on the spar that is the next step.

HINT: There is a page from the RV-14 plans that gives you exact dimensions for the holes you will need to countersink into the spar. See picture below. These are meant for the 14 but are the same for the RV-8. This will allow you to physically measure the depth and radius of the countersunk holes to make sure you are not going to deep or making them too wide.