I've been cleaning the hangar out so not a lot of work, but prepped up the powder-coated flaperon brackets, adding the two plastic pieces in the slot where the inboard flaperon "stub" goes. You have to keep a 1/4" gap but the problem here is the rivets that are installed after the pieces are epoxied into place, cam protrude slightly. So I filed a few down. I was able to get a 1/4" piece of aluminum into the slot, but not without great difficulty. So I may need to adjust that at some point.

The next step is fitting the wings, but I need to get the camper put where it belongs for the winter (it needs cleaning first), and then find a helper.

We're all headaing east to Oralie's memorial service later this week.