Project: SpiritOfMudsuck     -     Entry

Apr 14, 2018 1.3 XNB-T01: Install Port Ruddervator Category: Empennage
Ran length of 16 gauge through vinyl 'conduit' to stabilator tip for video camera. Riveted bottom skin trailing edge to triangular insert.
Cleco'd ruddervator hinge to stabilator. Attached stabilator. Installed bushing to adapt AN3 bolt in port pushrod

No Pictures found for this entry

NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.