Project: SpiritOfMudsuck     -     Entry

Jun 01, 2018 2.5 XNB-T04: Port Side Ruddervator Cutout Category: Empennage
Cut fiberglass stabilator tip cutout with a wood blade on a battery powered oscillating saw. Started cutout with a 3/4" relief, with room for sanding to 7/8" relief.

No Pictures found for this entry

NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.