1. Began fabricating the harnesses that will connect the front cockpit Push-To-Talks (throttle-mounted and backup) to the audio panel. Also created the harness that will connect to the smoke switch on the throttle. All three switches on the throttle quadrant will have connectors, so that the switches can be more easily replaced if needed someday. This will also ease installation and servicing of the three quadrant control cables.
2. Fabricated the 10 AWG line running from the 40A current limiter to the Aux shunt. The only remaining wires to be attached to the relay panel will be the wires to the starter, and to the Main and Standby alternators. These will be accomplished after the engine is hung.