I thought I was pretty much finished with all the miscellaneous wiring in the fuselage, but I found a few more things to take care of today:

1. Fabricated and ran the small harness for the aux music input from the left desk panel to the audio panel. Added a connector to the jack end.

2. Attached the 9-pin D-sub connector for the CO Guardian unit under the left desk panel.

3. Ran the cable for the fuel flow sensor to the GEA 24, and attached its connector at each end. Secured this cable and the fuel pump cable to a nearby longeron with an Adel clamp.

4. Continued wire-lacing and securing various wire bundles throughout the airplane.