Continued fitting lower cowl:

1. Removed lower cowl. Locked the depth of the 4 bottom Skybolt recepticles.
2. Removed the lower firewall Skybolt stud rings from the upper cowl to let it lay flat, and unlocked the next two to give the upper cowl some flexibility.
3. Remounted the lower cowl, except this time I slipped the back edges underneath the edge of the upper cowl. Clecoed the front end and fastened the bottom Skybolts.
4. Traced the edge of the upper cowl onto the lower cowl with a sharp pencil. This will be my cut line for the lower cowl.