1. Installed the inboard nutplates under the cover plate for the air filter holder. Added two more rivets on each of the air filter angles to give them more stability.
2. Finished final-drilling and deburring all holes in the L front baffle components. Tweaked the fit of the attach angles for the forward baffles.
3. Installed the four nutplates on the #2 cylinder baffle that will attach to the the L front floor.
4. Cut off the excess lower part of the #2 cylinder baffle that will not be used because of my revised design. Bent the forward edge of the baffle at a 5-degree angle inward.
5. Cleaned and primed the interface sides of the air filter holder z-channels.
6. Sanded last night's filler. Added some more filler to few big divots.