1. Removed the canopy skirt.
2. Marked the skirt to be trimmed to ease its fit. Sanded about 1/8" or so off the edge of the curved part of the skirt.
3. Marked and taped off a 1" strip around the lower, inboard face of the skirt. Sanded off the bed-liner in this strip, then brushed on some clear resin so the area will be smooth to the touch.
4. During the clecoing of several holes yesterday we dislodged a few rubber grommets, so today I replaced them. In the interest of making it easier to see into the holes, I also replaced the black grommets in the aft six holes with white ones.