1. Sanded down both sides of yesterday's filled holes, then feathered them with fine sandpaper until they were gone.
2. Masked the inside of the skirt to increase the coverage area of the resin-covered areas at the bottom and top edges. (This will keep the semi-rough bedliner away from the canopy glass and the paint on the fuselage.)
3. Sanded off the bedliner in these areas, then cleaned the skirt.
4. Applied clear resin to the new areas with a 1" brush. Removed the masking tape.
5. Once the new areas had dried, I reverse-masked them and sprayed a new coat of bedliner on the interior area.