1. Filled and sanded some slight divots in the outside surface of the canopy skirt.
2. Reassembled the canopy latch mechanism using the new latch arm I just received from Vans. Got in the cockpit, closed the canopy, and marked a starting point for cutting the latch arm.
3. Drilled and repetitively trimmed the latch so it holds the canopy closed without undue stress on the frame. I also made it so there is a slight notch where the canopy frame pin rests.
4. Assembled the latch assembly and tried various combinations of washers so the assembly didn't move laterally in the frame tube. I still have to figure out a way to prevent the handles from turning so easily when the latch is open.