Windshield fairing:
1. After my final inspection of the windshield fairing, I decided the right aft side needed a slight profile correction. (It had a slightly depressed area that was noticeable if I did the "flashlight test.") I sanded the area, mixed up some SuperFil filler, and applied it to the area.
2. This evening, after it had cured, I block-sanded it down to a nice profile, then began feathering the edges.
3, Finally, I applied some filler to several locations where some divots remained.

Inside radius sanding and filling:
1. Sanded yesterday's filler application into a nice smooth curved surface.
2. Prepped the surface and applied some spot filler to areas that needed it.