More time on turtle deck smoothing more trimmed edges, redoing some Camlock studs, Pulled pins on camlock receptacles to lock adjustment. Checked trim position sensor actuating tab on horizontal stab and seems to be WNL.
Trimmed more on windshield/front spare junction for more clearance. Sanded and smooth the trimmed areas on windshield.
Fuel and fuel vent lines/hoses installed to header tank.
Put some printed labels on plus connectors coming from the wings before the marker writing totally fades away.
Magnetometer not online...red "X", checked the plug, checked CANbus wiring pulses running up and down, checked voltage and showed almost 12 volts so I guess I killed the magnetometer on one of its drops....i'll have to order another one.
More research into configuration for GNX 375 and GDU 460.