Project: I-CAVS     -     Entry

Sep 21, 2019 3 7-9 step 1-8 RUDDER assembly rudder, blind rivet stiffener Category: Tail Feathers
Prepare aluminium angle as reference for trailing edge.
Apply 3M doubleside tape to both sides of trailing edge R-1006 wedge.
Rivet stiffener and shears clip R1010A-G Left and Right to R1005A-G using LP4-3 blind rivets
Cleco skins, trailing wedge and aluminium angle reference together.
Clecoed every single hole.
Add weights to the 4"" board on top of rudder.




NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.