Project: I-CAVS     -     Entry

Oct 24, 2019 2 8-3 step 3 HS Elevator attachment bracket fabrication Category: Tail Feathers
cut from AA6-187X2X2-1/2 angle two parts
Drilled 1/8"" hole in the indicated position.
Trimmed to measure.
Drilled 3/16"" holes
Radius all corners 1/8"".
After mounting and matchdrilling the holes are right at the limit to the edge.
After consultation with Lucio Castrogiovanni it seems that the fabrication is acceptable.
As i ordered other angles from VANS i consider to refabricate the brackets.

No Pictures found for this entry

NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.