Project: I-CAVS     -     Entry

Jan 03, 2020 1 9-7 step 5-6 ELEVATOR trim cover plate nut plate drill Category: Tail Feathers
Final drilled the holes for the nutplates K1000-06 with #28 drill bit (checked on several manuals).
Dimpled the skin with dimple die #6 for screws.
Dimpled the skin on the outside for 3/32 flush rivets.
Dimpled all the K1000-06 nuts to accept the dimple in the skin.

No Pictures found for this entry

NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.