Kieran and I built the rudder pedal cables which link front and rear pedals together. Cables from rear pedals to the rudder still have to be strung, but it seems best to wait until the rudder is mounted. Brother in law bob is going to build a pulley guard and mount which will fit in the first rudder cable fairleads aft of the pedals. Canadian authorities apparently do not do not like the fact that the rudder cable comes off the rear pedal, and after angling down to the floor, makes a bend of about 15 degrees, which is too much for a fairleads. I bought two more 2-inch pulleys and we will mount them in the fairleads hole, such that we don't have to weld anything new onto the fuselage.