For the fairings I purchased:
Epoxy (west systems)
Pro Filler
Bidirectional cloth
Spreaders
Micro bubbles
Dispensers
I also purchased for fasteners the 2 lug and 1 lug nutplates for the #04 screws. Aircraft spruce did not have these so I found them at Spencer Aircraft. I also got soft rivets for attaching the nutplates to the fairings.
There's quite a bit of work to get the fairings to be perfect. Both of my elevator fairings were dented and I had to repair them, Van's didn't even respond to my request for new ones. In the end it was just a little bit of filler and all is nice and smooth.
When I started it was very cold so I used a fast hardner, but then the temperature rose and I quickly learned to use the slow hardner.
Fur cutting the glass I used the dremmel and for sanding I have found that 60 grit 3M paper followed by 120 and then 400 for finish works extremely well.
Learning a lot about fiberglass and enjoying every second of it.