Fuselage (Rebecca Colwell): We were working on the fuselage ribs. We dimpled, riveted, and installed nut plates. We dry fitted sections of the ribs. Some parts prepping and countersinking. We worked with a part at weird angle and had to countersink instead of dimple with a nut plate. Fairly redundant, but productive. Finding the special rivets and nut plates was much easier with new kami ledger.
Wings (Maggie Colwell): Got the wing walk doublers (extra support for when you walk on the wing) ready to rivet. Brady worked with pro seal and sealed the gap between 2 wing skins to make it water tight. For riveting we had a lot of trouble getting the holes on the 2 layers of skins and ribs to align.
Lighting (Holden Glass): I finished fabricating the brackets to get on there. I used a pneumatic dremel to cut and fabricate.
Harsh Patel: I set up the parts storage ledger on Kami: https://kami.app/AyN-SVj-duC. This greatly improved the efficiency of finding parts. I will try digitalizing more of the instructions to make this more efficent.