Don't have room to do much in the shop at the moment but did pull out the new HS-1013 front spar caps and fabricated them per plan. Deburred and set aside until I have room to do the spar.

These did come out much better than the first ones too. I've learned to just use the thin wood blade on the band saw. It cuts aluminum just fine and much straighter.

In other good news, I've been reading on some forums about parts being highlighted if they are NOT drilled final sized. I thought it was the final sized parts that were highlighted and I didn't have any that were highlighted so I thought all of mine needed to be drilled. I think I must have read that backwards on the flyer that came with the kit. I confirmed that all of my holes are indeed final sized. That will save me a step going forward.