4/30 pm 0.6 - remove vinyl and label. Start deburring
4/1 am 0,5 - more debur, child labor
4/5 pm 0.5 - lightening holes
4/6 am 0.5 - lightening holes through the W-1011Ls
4/8 am 0.9 - lightening holes through the W-1011Rs, debur edges through 1011Ls
4/12 pm 1.2 - through the edge deburr, half way through fluting
4/20 0.6 - finally finished all the fluting

Can't do anymore on the leading edges so I'll start knocking out some of the main rib deburring. It's going to take a while. A good evening activity.

Spending a lot of time on the lightening holes, knowing that I'm going to be shoulder deep into those holes soon. Deburr with the pencil tool, then scotchbrite. Was using the 1” wheel on the drill press but found using a pad and doing it by hand was as good if not better.