Lots of work on wiring harness. Shop is a complete mess. Wires everywhere. But there is some order in the chaos. I have been using my cut sheets I made for each system and a lot of cross referencing against my wire list and the larger interconnect drawings I have. It's honestly mostly in my head at this point though. Needing to make some adjustments on the fly for CANBUS routing and general routing of miscellaneous wires. I'm afraid some of the runs might come up short but I'll deal with that when and if it comes. To worry too much about perfect lengths now would stop me in my tracks.

Finished most of the data wires and moved on to some of the power and grounds. I got a few of the “branches” complete today including the GTN, IBBS and GTR. Ran out of 2 wire shielded wire, and need some single wire unshielded wire among other things. Putting together yet another large Steinair order.

3/19: little bit of progress running some power and ground wires. Finished out GEA, PFD MFD, GMC and GAD29 bundles.

3/21: some more progress. Bundle is really growing. Starting to second guess headset routing. I wanted traditional jacks on the panel and Lemos in the center console. Stating to wonder why I need regular jacks at all.