Sanding the door frame joints which is messy and a pain but almost complete. In between sanding and re-applying the bondo I have been finishing up the VHF antenna mounts in the vertical stab. Mounted the center mount that supports the antenna cable BNC connection as well as the lower mount. Once the Hysol had set, I installed the antenna and am happy with the results. Others who have mounted this dipole antenna in the stab have reported good results so am happy with this. I also started building the electrical cable for the trim motor and antenna cables that will run back to the far rear of the fuselage. Need to do the cable for the position light in the tail but am looking at how to run the cable from the fuselage into the rudder.