I have been fabricating various mounting brackets for the avionics and getting a better handle on how I will be running the wiring up to the front of the fuselage. Completed the mount for the GPS-20 unit behind the pilot seat and built up the two plates where I will mount the headset sockets for both the pilot and copilot. Still have to drill the holes for the connections but at least have the brackets built. I also ran some aluminum channels that will go under the seat and support the wiring going forward. I had fully installed the center console and the seat to make sure the wiring channels would work out when my daughter (Navy pilot) and wife (pilot under training) decided I needed to install pilots as well. Think they are having as much fun as I am. Almost.