I finally got to start on skinning. Cut my first piece of Oratex, marked off where the glue need to go, laid down the glue and let it dry three hours. Then I applied the second coat of glue which also got to dry. Going to lay down the glue on the right wing and once that has two coats that have dried, I will get to attach my first piece. While waiting for the glue to dry, I attached the clips to my tail inspection panel opening that will allow me to use 6-32 screws to hold the panel. They attached pretty securely but I did put a dab of Hysol on them just for insurance. I also assembled my battery box just cause I could. Last but not least, I attended the Kitfox Factory Fly In last weekend and was able to take a very close look at an almost assembled factory build aircraft. That let me see some of the little tricks Brandon and crew use when building those. One of the takeaways was a small opening up of the forward floorboard that allows you access to the nut when you attach the landing gear. So you know I took max pics and today I did the same to mine.