Got my panel back from Stein who did an excellent job on the engraving so I figured I should start populating the panel and installing it. I also used the trusty label maker and made labels for all the switches and such that I could put on the back so I am sure what is going where. I also put connector designator labels on the boxes so I would be sure of which connector I was really running a wire to when I get into full on wiring. Since I am using the VPX to control the electronics, I was able to easily wire in the switches on the right side of the panel along with the ELT as well. Installed the GPS unit on its plate behind the seat, installed the control sticks and the ran the wiring to the respective boxes for the switches on the stick.