Started work on the two NACA side vents for cockpit air vents. Located them according to the directions but had to make my own cutout template since the one in the instructions must have been an older one that was not the same size. Made the cutout on both sides and Hysol'd the vent into place. Let that dry for a day and then used the filler to smooth in the sides of the vents into the boot cowl and fill the Cleco holes. After it dried and I could sand it smooth, I primed the vents so they are now complete. While waiting for things to dry, I worked on a little more wiring (couple grounds I forgot to account for) and decided to mount the Parking Brake/Pedal Adjust placard. My locking tail wheel control was encroaching on the space that placard would normally take so I modified it a bit (gotta love a table saw) and mounted them as shown.