Still waiting for a couple parts to proceed with the boot cowl/firewall so working on a few things that I either needed to get done or sub-assemblies for later. One of the major things to get done was finish up the brake lines to the calipers from the parking brake valve. Wanted a bit more of a robust brake line down the struts to the calipers than the stock Nyloflow lines. So I changed over to 3/16" stainless braided PFTE lines. Bought an extended length bolt for the caliper where I mounted the Adel clamp to account for the thickness of the clamp. Fitted in the seat pan to insure that the upper adapters from 3AN to nylon fittings didn't interfere with each other. Was pretty happy with the way they turned out.