Cut off one of the bends I made yesterday and connected to each end of the fuel pump. It is going to be a really tight fit under the cover. I need a smaller bend radius. I tried a few other bends with the new spring bender and some of the tools from yesterday in a different way and the results were bad. I'm going to a hydraulics shop tomorrow and see if they can make some bends for me.

Also took a picture of one part I made that looks like with a small amount of work that it could connect to the fuel selector valve (three red caps on the fittings), and run out to the wing root. My roll of practice tubing is now scheduled to arrive Friday!