Received clevises for mixture and throttle cables. Clock the throttle body throttle and mixture lever arms based on the cable mounting location. Both cables need additional mounting fixtures because the cable threaded ends are aft of their respective mounting brackets. The mixture cable mount needs to move left about 1" to line with the mixture lever. Fabricate bracket attached to existing mixture bracket to move attachment point 1" left. Verify throttle and mixture cables can operate their respective levers through their full range of motion. Ordered material to fabricate fixtures to mount both cables to their respective brackets. The mixture arm for the Precision Airmotive throttle body is different from the arm called out in the filter air box instructions. The good news is the new arm does not require the filter air box to be modified to correct for interference.