Finished deburring and dimpling the bottom skins, realized I forgot to dimple the ribs, so I had to remove the skins, and dimple all of the ribs, then re-hang the bottom panels. Installed the plumbing for the Pitot, and AOA (angle of attack). drilled the ribs and installed ferrules to prevent chafing of the tubing. Shortened up the piping from the Pitot tube, and set up so if I ever have to remove the tube I only have to remove the nut on the clamp then pull the whole assembly out to get to the tubing. Also installed the tube for the folding wing option to ensure there was no interference with the plumbing.