Project: wlawrence     -     Project Summary     - Optional PDF document function     - Multi-sectional PDF
Add entry descriptions           Project PDF with: -

Entry #CreatedTitleCategoryHours # Pictures
406     Mar 17, 2024 This and that. Various 1   
405     Feb 16, 2024 Pitot Static and Mode C check Avionics 1   
404     Feb 12, 2024 Fettling Ignition 3   
403     Jan 19, 2024 Riding the struggle bus Various 10   
402     Nov 19, 2023 The last 3 weeks... Various 0   
401     Oct 29, 2023 Reassemble the panel Instrument Panel 0   
400     Oct 28, 2023 Third Time's A Charm Fuel System 0   
399     Oct 16, 2023 Replace fuel probe, etc Fuel System 2   
398     Oct 01, 2023 Nut plates Instrument Panel 10   
397     Sep 04, 2023 Windshield off, glare shield extension off Instrument Panel 3   
396     Sep 03, 2023 Ailerons connected Controls 0   
395     Sep 02, 2023 Pushing Various 2   
394     Aug 27, 2023 "Hero" wing spar pin in Starboard side Wings 0   
393     Aug 27, 2023 "Hero" wing spar pin in Starboard side Wings 0   
392     Aug 19, 2023 Details Ignition 6   
391     Aug 06, 2023 Weekend work Various 2   
390     Aug 01, 2023 Cleaning up the install Ignition 1   
389     Jul 30, 2023 A little progress in the last few weeks Various 0   
388     Jul 10, 2023 Weighed the airplane Documentation 3   
387     Jul 07, 2023 Dings, fairing strips Wings 6   
386     Jul 06, 2023 Wing walk, wing tips, etc Wings 3   
385     Jul 05, 2023 Trim, wing walks Wings 5   
384     Jul 04, 2023 Wings on and pinned Wings 0   
383     Jul 02, 2023 Wings on, sort of Wings 1   
382     Jul 01, 2023 Ignition and housekeeping Ignition 2   
381     Jun 11, 2023 More ignition details, also wheel pants Ignition 4   
380     Jun 05, 2023 Ignition wires Ignition 1   
379     Jun 03, 2023 Still Igniting Ignition 5   
378     May 29, 2023 Still with the ignition Ignition 7   
377     May 28, 2023 More ignition progress Ignition 1   
376     May 28, 2023 Ignition bracket is mostly done Ignition 3   
375     May 21, 2023 Ignition bracket Engine 7   
374     May 20, 2023 Cleanup, starting ignition bracket fab Various 4   
373     May 13, 2023 Engine run, starting on brackets for Ignition Engine 3   
372     May 08, 2023 More trials Engine 2   
371     May 06, 2023 Another engine run Engine 1   
370     Apr 30, 2023 Engine Start Engine 2   
369     Apr 24, 2023 More engine start preps Various 3   
368     Apr 22, 2023 Preparing for engine start Various 1   
367     Apr 16, 2023 Back on Windscreen 2   
366     Apr 11, 2023 Glare Shield secured Glare Shield 1   
365     Apr 09, 2023 More progress Various 1   
364     Apr 08, 2023 Brakes finally bled? Various 2   
363     Mar 25, 2023 Brakes, heat shielding Various 2   
362     Mar 19, 2023 Brakes, carb and controls Various 7   
361     Feb 11, 2023 New Brake Master Cylinder Controls 0   
360     Feb 05, 2023 Rocker Shaft Upgrade Engine 2   
359     Jan 16, 2023 Labeling, cleanup, skins Avionics 2   
358     Jan 15, 2023 Rigged "pigtail" for future aux fuel Fuel System 1   
357     Jan 08, 2023 Nose wheel pant, more baffling refinement, removing the toe brakes Landing Gear 5   
356     Jan 08, 2023 Brakes, Canopy hold open Controls 3   
355     Jan 02, 2023 More work on mixture and throttle relocation Controls 3   
354     Jan 01, 2023 More work on engine controls Controls 0   
353     Dec 20, 2022 Auditing carb, relocating controls Fuel System 3   
352     Dec 19, 2022 Fuel flow test Fuel System 2   
351     Dec 02, 2022 Like peeing on the fence post.... Paint / Decals 2   
350     Nov 29, 2022 Calibrate fuel sensor Fuel System 3   
349     Nov 22, 2022 Finish new latch Canopy 2   
348     Nov 06, 2022 Fitting Peter Anson latch Canopy 1   
347     Nov 05, 2022 Registration received Documentation 1   
346     Oct 14, 2022 Fuel cap, tank, door Fuel System 1   
345     Sep 05, 2022 Baffling lily gilding Engine 3   
344     Sep 03, 2022 Mailed in the registration application Documentation 0   
343     Aug 31, 2022 Vent, fuel door Fuel System 1   
342     Aug 31, 2022 More with the baffles Engine 2   
341     Aug 30, 2022 Baffling Engine 5   
340     Aug 28, 2022 Details Cowl 3   
339     Aug 28, 2022 Finished remote fuel shutoff Fuel System 3   
338     Aug 21, 2022 Installed fuel tank vent Fuel System 1   
337     Aug 21, 2022 Finished tie down Wings 1   
336     Aug 10, 2022 New magnetron is in Engine 2   
335     Jul 24, 2022 Mod for top vent Firewall 1   
334     Jul 18, 2022 Planning the last mile Documentation 1   
333     Jul 18, 2022 Cockpit Work Platform Fuselage 1   
332     Jul 18, 2022 Stop drilling the cracks in the canopy. Canopy 2   
331     Jul 10, 2022 Do it like the plans Fuel System 1   
330     Jul 05, 2022 Breather mods for a cleaner belly Engine 4   
329     Jul 04, 2022 Temporary Seat Fuselage 1   
328     Jul 04, 2022 Mods to make it easier to get wings on and off Wings 2   
327     Jul 04, 2022 Stress cracks Canopy 3   
326     Jul 04, 2022 From finger strainer to firewall Fuel System 4   
325     Jul 04, 2022 Top of the engine Engine 3   
324     Jul 04, 2022 Cleared some interferences Controls 2   
323     Jul 03, 2022 Push rod tubes Engine 1   
322     May 01, 2022 Heads Engine 2   
321     May 01, 2022 Belly Skin is on Fuselage 0   
320     Mar 20, 2022 Still on the belly skin Fuselage 2   
319     Mar 06, 2022 Aft fuselage belly skin Fuselage 0   
318     Jan 23, 2022 Pulling dents Fuselage 1   
317     Jan 22, 2022 Shadow Board and Plans stand Workshop 2   
316     Jan 22, 2022 Insulating the exhaust Engine 1   
315     Jan 22, 2022 More recent completions - Fire Sleeve Fuel System 3   
314     Jan 07, 2022 Work Continues Cowl 10   
313     Aug 21, 2021 Moving Day Project Sale 12 9   
312     Aug 14, 2021 fabricate Tools To Drive Out Wing Temporary Retaining Pins Tools 3 1   
311     Jul 31, 2021 Continue Assembling Hardware For New Owner To Be Able To Finish Assembling Aircraft Workshop 8 4   
310     Jul 28, 2021 Continue Assembling Hardware For New Owner To Be Able To Finish Assembling Aircraft Workshop 3.8 1   
309     Jul 27, 2021 Begin Gathering Materials To Go With The Project When It Is Sold Workshop 4 2   
308     Jul 27, 2021 Windscreen Crack Repair Complete Windscreen 2 1   
307     Jul 21, 2021 Repair Crack IN Windscreen Windscreen 6 4   
306     Jul 20, 2021 Recently Acquired Early Builder's Log Entries And Photos Documentation 2 17   
305     Jul 20, 2021 Present Project For Sale Presentation 6 8   
304     Jul 20, 2021 Modified Elevator Trim Control Cable Controls 2 1   
303     Jul 17, 2021 Technical Counselor Inspection And Repairs Inspection 14 5   
302     Jul 10, 2021 Test Alternator Output Engine 6 1   
301     Jul 10, 2021 Fabricate New Valve Cover Screw Seals Engine 1.5 1   
300     Jul 07, 2021 Apply Additional Coat Of Paint To Glare Shield Glare Shield 1 1   
299     Jul 07, 2021 Re-install The Fuel Tank Fuel System 1 2   
298     Jul 07, 2021 Bleed Right Hand Landing Gear Brake One More Time. Landing Gear 2 1   
297     Jul 06, 2021 Bleeding Landing Gear Brakes Again To Remove Air Bubbles Landing Gear 6 2   
296     Jul 06, 2021 Continue Modifications to Glare Shield and Fit Shield to Fuel Tank and Longerons Glare Shield 6 3   
295     Jul 03, 2021 Modify Glare Shield To Fit Over Fuel Tank Glare Shield 5 1   
294     Jul 03, 2021 Rework Fuel Tank Mounting Straps Fuel System 9 4   
293     Jun 30, 2021 Clean Oil Breather Tube Engine 2 1   
292     Jun 30, 2021 Completed Connecting All Control Linkage Controls 8 3   
291     Jun 29, 2021 Complete Hinge Pin Installation on Ailerons and Flaps Wings 10 5   
290     Jun 29, 2021 Install missing Rivets Fuselage 2 1   
289     Jun 24, 2021 Complete Hinge Pin Installation on Rudder and Elevator Controls 9 4   
288     Jun 22, 2021 Continue Connecting Aileron Linkage and Rigging Ailerons Controls 8 2   
287     Jun 12, 2021 Continue Connecting Aileron Linkage and Rigging Ailerons Controls 8 0   
286     Jun 12, 2021 Finish Deburring Rivet Holes For Wing Root Doublers Wings 1 1   
285     Jun 09, 2021 Finish Drilling and Deburring Rivet Holes For Wing Root Doublers Wings 9 3   
284     Jun 08, 2021 Add End Rivets And A Latch Knob To The Canopy Left Hand Lower Rail Canopy 4 4   
283     Jun 08, 2021 Drill And Cleco Left Wing Doubler And Wing Walk Wings 4 3   
282     Jun 05, 2021 Connect Aileron linkage Wings 13 3   
281     Jun 02, 2021 Compete Flap Rigging and Connect Ailerons Wings 9 0   
280     Jun 01, 2021 Rig Wing Flaps Wings 8 0   
279     May 29, 2021 Complete Engine Wiring Engine 8 4   
278     May 26, 2021 Install Flaps and Fabricate Flap Fairings Controls 9 2   
277     May 25, 2021 Install Ailerons and Linkage Control Linkage For Flaps Controls 13.5 3   
276     May 22, 2021 Continue Work On Engine and Avionics Wiring and Connections Avionics 6 3   
275     May 22, 2021 Retrieve Flaps and Ailerons from Storage Wings 2 1   
274     May 22, 2021 Reinstall Engine Cooling Baffles Engine 1 0   
273     May 19, 2021 Further Evaluate Magnetron Ignition Coils Ignition 8 0   
272     May 18, 2021 Test New Magnet For Magnetron Ignition Ignition 7 1   
271     May 15, 2021 Replace Magnet for Magnetron Ignition System Ignition 9 1   
270     May 12, 2021 Trim L/H Wing Doubler and Wing Walk Wings 8 2   
269     May 12, 2021 Trim Wing Doubler Wings 6 2   
268     May 08, 2021 Fit Wings to Fuselage Wings 6 8   
267     May 08, 2021 Test For Spark At Spark Plugs Ignition 6 0   
266     May 05, 2021 Add Ground Wire From Magnetron Ignition Coils to Engine Block Ignition 6 2   
265     May 04, 2021 Engine Oil Filler Cap Engine 1 1   
264     Apr 28, 2021 Finish Reassembly of the Ancillary Parts of the Engine and Check the Magnetron Ignition. Ignition 6 0   
263     Apr 27, 2021 Pull Engine to Inspect Magnetron Ignition Magnet on Flywheel Ignition 8 3   
262     Apr 21, 2021 Check Piston Positions and Plugs for Magnetron Ignition Firing Ignition 2 0   
261     Apr 21, 2021 Work On Securing Proper Clearance To Install Wings Through Spar Tunnel Continues Wings 4 0   
260     Apr 20, 2021 Work On Securing Proper Clearance To Install Wings Through Spar Tunnel Continues Wings 8 0   
259     Apr 19, 2021 Continue Work On Securing Proper Clearance To Install Wings Through Spar Tunnel Wings 6 0   
258     Apr 14, 2021 Work On Securing Proper Clearance To Install Wings Through Spar Tunnel Wings 6 0   
257     Apr 14, 2021 Complete Replacing Short Rivets Securing Fuselage Rear Skin To Longerons Fuselage 2 0   
256     Apr 13, 2021 Continue Drilling Out and Replacing Short Rivets In Fuselage Skin Fuselage 6 1   
255     Apr 10, 2021 Continue Replacing Fuselage Skin To Longeron Rivets That Are Too Short. Fuselage 5 0   
254     Apr 06, 2021 Replace Rivets Securing Fuselage Skin That Are Too Short Fuselage 4 1   
253     Apr 06, 2021 Wing Flap Piano Hinge Rivet Irregularity Wings 2 3   
252     Apr 03, 2021 Take Measurements Of Spar Thicknesses and Spar Tunnel Opening Wings 4 1   
251     Apr 03, 2021 Third Set of Magnetron Ignition Coils Unsuccessful Ignition 4 1   
250     Mar 31, 2021 Replace Motor Mount Bushings and Bolts and Magnetron Ignition Coils Engine 6 2   
249     Mar 31, 2021 Continue Effort to Install Wings Wings 8 1   
248     Mar 30, 2021 Aligning Bolt Holes In Wing Spars and Spar Tunnel Wings 8 2   
247     Mar 27, 2021 Install Wing Spars in Spar Box In Fuselage Wings 4 5   
246     Mar 27, 2021 Ream Wing Anchor Bolt Holes to Proper Size Wings 2 2   
245     Mar 27, 2021 Install Seat Belt Shoulder Belts Interior Finish 2 2   
244     Mar 25, 2021 Installed Seat Belts Interior Finish 4 2   
243     Mar 20, 2021 Rearrange Workshop In Preparation For Installing Wings Workshop 4 2   
242     Mar 20, 2021 Fill Extraneous Holes In Fuselage Skin Fuselage 3 2   
241     Mar 20, 2021 Tack Cockpit Upholstery In Place Interior Finish 3 0   
240     Mar 17, 2021 Disassemble and Inspect Control Stick Pivots Controls 3 0   
239     Mar 17, 2021 Remove Lower Magnetron Coil Ignition 2 1   
238     Mar 16, 2021 Attach Snaps For Seat Backrest Interior Finish 4 2   
237     Mar 16, 2021 The Magnetron Ignition Dilema Continues Ignition 4 2   
236     Mar 10, 2021 Rivet Seat Sling Piano Hinge Fuselage 2 2   
235     Mar 10, 2021 Continue Testing and Research Into Magnetron Ignition Concern Ignition 4 0   
234     Mar 09, 2021 Finished Installing Tail Cone Rivets Fuselage 5 2   
233     Mar 09, 2021 Another Attempt to Run Engine On Magnetron Ignition Ignition 5 0   
232     Mar 07, 2021 Rivet A Portion of the Tail Cone Sheet Metal Fuselage 4 2   
231     Mar 07, 2021 Still Researching No Spark From Magnetron Ignition Ignition 4 2   
230     Mar 03, 2021 Cleco Fuselage Tail Cone, Order Specified Rivets Fuselage 5 2   
229     Mar 03, 2021 Install New Oil Cooler on Engine Engine 2 1   
228     Mar 02, 2021 Successful Engine Run Engine 5 2   
227     Feb 28, 2021 Install New Throttle Cable Engine 9 3   
226     Feb 24, 2021 Recheck Oil Pressure and Short Engine Run Engine 10 6   
225     Feb 23, 2021 Remove, Inspect, Clean and Replace Oil Pressure Relief Valves Engine 7 3   
224     Feb 21, 2021 Start Engine Check Systems Engine 2 2   
223     Feb 21, 2021 Install New Oil Cooler on Engine Engine 2.5 1   
222     Feb 21, 2021 Paint Glare Shield Fuselage 1 1   
221     Feb 18, 2021 Remove Oil Cooler Engine 4 1   
220     Feb 18, 2021 Continue Engine First Start Attempt Engine 6 1   
219     Feb 17, 2021 Install New Magnatron Ignition Coils Ignition 7 1   
218     Feb 14, 2021 Re-set Secondary Ignition Timing Ignition 4 0   
217     Feb 14, 2021 Adjust Wheel Bearings Landing Gear 3 0   
216     Feb 10, 2021 Bleeding Landing Gear Brakes Landing Gear 6 4   
215     Feb 09, 2021 Diagnose And Remove Magnatron Coils Engine 10 1   
214     Feb 06, 2021 Continue Engine First Start Attempt Engine 10 2   
213     Feb 03, 2021 Research Fitting Wings To Fuselage Research 4 1   
212     Feb 03, 2021 Shorten Oil Cooler Inlet Line Engine 2 6   
211     Feb 02, 2021 Made and Installed Shorter Oil Cooler Lines Engine 5 3   
210     Feb 02, 2021 Install Brake Line Fittings On Wheels, Reassemble Wheel Assembies And Form Brake Line Tubes Landing Gear 5 2   
209     Jan 31, 2021 Continue Work On Replacing Brake Line At Wheel Cylinder Landing Gear 9 1   
208     Jan 31, 2021 Made and Installed New Oil Cooler Lines Engine 4 3   
207     Jan 30, 2021 Replace Handle On Fuel Valve Fuel System .5 1   
206     Jan 30, 2021 Make New Fuel Line and Install Fuel System 3 1   
205     Jan 30, 2021 Remove Oil Cooler Lines And Fuel Line Engine 1.5 1   
204     Jan 30, 2021 Static Time Engine Ignition 6 1   
203     Jan 26, 2021 Rearrange Shop Workshop 4 1   
202     Jan 26, 2021 Improve Engine Breather Tube Routing and Fit Engine 4 3   
201     Jan 23, 2021 Engine Oil Pressure Check Engine 20 4   
200     Jan 20, 2021 Added Fuel To Fuel Tank Fuel System 2 1   
199     Jan 20, 2021 Fill Engine Crankcase With Oill Engine 4 2   
198     Jan 20, 2021 Continue Work On Brake Lines Landing Gear 6 2   
197     Jan 19, 2021 Safety Wire Carbureter to Intake Manifold Engine 1 1   
196     Jan 19, 2021 Propeller Onto Hub and Torque Temporary Bolts. Propeller 7 6   
195     Jan 17, 2021 Prep Propeller for Installation Propeller 2 2   
194     Jan 17, 2021 Reinstall Exhaust Manifolds and Install EGT Sensors Engine 3 3   
193     Jan 17, 2021 Weld Stainess Steel Nuts To Exhaust Manifolds Engine 6 1   
192     Jan 17, 2021 Complete One Brake Line Landing Gear 1 1   
191     Jan 13, 2021 Begin Work On Adding Metal Brake Line At Brake Wheel Cylinder Landing Gear 6 2   
190     Jan 13, 2021 Drill Holes and Rivet Quarter Turn Retainer onto Cowl Cowl 2 1   
189     Jan 12, 2021 Trim and Dress Cowl Fibreglass Reinforcement. Cowl 1.5 2   
188     Jan 12, 2021 Make Spark Plug Wires for the Lower Spark Plugs Ignition 6 4   
187     Jan 10, 2021 Locate and Mark TDC and Timing Mark on Propeller Hub and Adjust Valves Engine 3 3   
186     Jan 10, 2021 Shorten Hinge Pin Tube in Lower Cowl and Lay Up Fibreglass for Reinforcement Cowl 4 3   
185     Jan 10, 2021 Plug Spark Plug Wire Hole in Rear Engine Baffle Engine 1 1   
184     Jan 09, 2021 Continue Engine Wiring and Drill Holes for EGT Sensors Engine 12 2   
183     Jan 06, 2021 Reposition CHT sensor on R/H Bank Spark Plugs Engine 2 1   
182     Jan 06, 2021 Secure Cylinder Head Baffle With Safety Wire. Engine 2 2   
181     Jan 06, 2021 Fabricate and Epoxy Hinge Pine Guide Tube for Cowl and Cut hole in Cowl to Access Gascolator. Cowl 1 4   
180     Jan 06, 2021 Shorten Oil Cooler Lines Engine 1.5 4   
179     Jan 05, 2021 Engine and Oil Cooler Cooling Baffles Complete! Engine 9 14   
178     Jan 03, 2021 Continue Engine Oil Cooler Baffle Work Engine 10 3   
177     Dec 30, 2020 Continue Engine Cooling Baffle Work - Left Front Lower Engine 9 4   
176     Dec 29, 2020 Continue Engine Oil Cooler Baffle Work Engine 9 4   
175     Dec 27, 2020 Continue Engine Cooling Baffle Work - Left Front Lower Engine 9 6   
174     Dec 20, 2020 Continue Engine Baffle Work - Left Front Lower Engine 9 2   
173     Dec 16, 2020 Continue Engine Baffle Work - Left Front Lower Engine 8 1   
172     Dec 15, 2020 Continue Engine Baffle Work - Right Front Lower Engine 9 5   
171     Dec 13, 2020 Complete and Install Rear and Both Side Engine Cooling Baffles Engine 9 7   
170     Dec 10, 2020 Cut Seals for Rear and Side Engine Cooling Baffles and Drill Holes for Mounting Seals to Baffles Engine 3 11   
169     Dec 10, 2020 Fabricate Bracket to Position Rear Engine Cooling Baffle Center in Place. Engine 3 2   
168     Dec 10, 2020 Engine Oil Cooler Upper Baffle Installation Engine 4.5 2   
167     Dec 08, 2020 Begin Cutting and Attaching Engine Cooling Baffle Seals Engine 8 3   
166     Dec 08, 2020 Elininate Interference Between Cylinder head Baffle and Exhaust Manifold Engine 4 1   
165     Dec 06, 2020 Temporarily Store Windscreen Windscreen 1 2   
164     Dec 06, 2020 Reassemble Engine Cooling Bafffles Engine 18 9   
163     Dec 02, 2020 Form and Install Engine Crankcase Vent Tube Engine 4 8   
162     Dec 02, 2020 Fabricate Starter Bendix Intrusiion Hole Cover Fore Rear Engine Cooling Baffle Engine 4 1   
161     Dec 02, 2020 Cutting Access Holes in Rear Engine Cooling Baffle Engine 13 6   
160     Dec 01, 2020 Continue Drilling Screw Holes to Secure Windscreen Windscreen 8 6   
159     Dec 01, 2020 Fabricate and Install Heat Shields for Oil Cooler Engine 7 4   
158     Dec 01, 2020 Continue Fabrication of Engine Cooling Baffle Seal Retainers Engine 4.5 2   
157     Dec 01, 2020 Install Carburetor Mixture Cable Engine 2 1   
156     Nov 29, 2020 Install Oil Cooler and Baffle Assembly to Lower Engine Case Engine 9 6   
155     Nov 29, 2020 Rivet Seat Sling Piano Hinge Fasteners Interior Finish 4 3   
154     Nov 29, 2020 Continue Drilling Holes to Secure Windscreen Windscreen 12 6   
153     Nov 24, 2020 Drill Holes For Screws In Windscreen Windscreen 20 6   
152     Nov 22, 2020 Winsdscreen Fitting Completed Windscreen 20 10   
151     Nov 18, 2020 Engine Cooling Baffle Seal Retainers (Continuing Work) Engine 2 1   
150     Nov 18, 2020 Mount Oill Cooler to Lower Engine Case Cooling Baffle Engine 6 7   
149     Nov 17, 2020 Fit Newly Cut Plexiglass Windscreen to Fuselage (Continued) Windscreen 9 4   
148     Nov 17, 2020 Lower Engine Case Baffle Fabrication (Continued) Engine 10 1   
147     Nov 17, 2020 Engine Cooling Baffle Seals (Continuing Work) Engine 4 3   
146     Nov 15, 2020 Cut and Begin Fitting New Windscreen Windscreen 6 11   
145     Nov 15, 2020 Replacement of Pitot Static Line Tube Avionics 4.5 4   
144     Nov 15, 2020 Continue Fabrication of Engine Cooling Baffle Seal Retainers Engine 4.5 1   
143     Nov 15, 2020 Continue Engine Lower Case Cooling Baffle Fabrication Baffling 9 5   
142     Nov 11, 2020 Fabricate Lower Engine Case Cooling Baffle (continued) Baffling 6 5   
141     Nov 10, 2020 Continued Progress on Engine Cooling Baffles Baffling 2 2   
140     Nov 10, 2020 Lower Engine Case Baffle Fabrication Baffling 6 5   
139     Nov 10, 2020 Throttle Cable Installation Complete Engine 2 2   
138     Nov 09, 2020 Throttle and Mixture Cables Installation Continues, Baffle to Cowl Seals Fabrication Engine 13.5 4   
137     Nov 04, 2020 Shorten Intake Manifold Spigot Engine 4 1   
136     Nov 04, 2020 Install Missing Engine Mount Bushing Engine .5 1   
135     Nov 04, 2020 Re-route Mixture Cable Engine 6 3   
134     Nov 04, 2020 Cut Patterns For Engine Cooling Baffle Seals Engine 4 3   
133     Nov 03, 2020 Trim Cooling Baffles to Fit Cowl Baffling 9 4   
132     Nov 01, 2020 Install Fuel Line and Intake Manifold Fuel System 9 7   
131     Oct 31, 2020 Continue Wiring and Testing of Avionics Avionics 6 2   
130     Oct 31, 2020 Throttle and Mixture Cables Fuel System 6 3   
129     Oct 28, 2020 Fuel Delivery Fuel System 10 8   
128     Oct 27, 2020 Make Pattern From Old Windscreen In Preparation for Cutting New Windscreen Windscreen 6 2   
127     Oct 27, 2020 Pressure Test Tank Fuel System 4 2   
126     Oct 25, 2020 Work on Fuel Valve Control Cable Fuel System 4 4   
125     Oct 25, 2020 Prepare To Cut Holes In Rear Fence Baffle For Intake Manifolds Engine 2 5   
124     Oct 25, 2020 Fabricate Front Lower Engine Cooling Baffle Baffling 4 4   
123     Oct 21, 2020 Prepare For Fuel Tank Pressure Test Fuel System 2 1   
122     Oct 21, 2020 Install Canopy Latch Return Spring Canopy 3 2   
121     Oct 21, 2020 Continued Progress on Engine Cooling Baffles Engine 9 10   
120     Oct 20, 2020 Continued Progress on Engine Cooling Baffles Engine 15 3   
119     Oct 18, 2020 Finish Gluing Canopy to Frame Canopy 5 5   
118     Oct 18, 2020 Sonex Progress Video Dialogue 3 2   
117     Oct 14, 2020 Replace Canopy Limit Wire Canopy 1 1   
116     Oct 14, 2020 Make Final Canopy Fit Adjustments and Glue to Frame Canopy 8 5   
115     Oct 14, 2020 to Secure Right and Left Canopy Frame With Screws and Rivets Canopy 3 3   
114     Oct 14, 2020 Continue Engine Baffle Work Baffling 5 5   
113     Oct 13, 2020 Glue Canopy Right and Left Sides to Canopy Frame Canopy 10 3   
112     Oct 13, 2020 Continue Engine Baffle Work Baffling 5 4   
111     Oct 11, 2020 Fabricate Cooling Baffles for Engine (continued) Baffling 4 4   
110     Oct 11, 2020 Adjust Spacing Between Canopy Bow and Canopy Canopy 4 1   
109     Oct 11, 2020 Cut Notch in Plexiglass Canopy For Latch Handle. Canopy 4 4   
108     Oct 11, 2020 Drill Rivet Holes In Canopy Hinge for Rivets Canopy 2 2   
107     Oct 07, 2020 Work on Engine Baffles and Oil Cooler installation Baffling 5 3   
106     Oct 07, 2020 Fit Latch for Canopy and Drill Holes for rivets in Lower Canopy Frame and Hinge Canopy 10 4   
105     Oct 06, 2020 Continue Fitting Canopy Front and Rear and Cut Righr Side Canopy 11 0   
104     Oct 04, 2020 Continue Fitting Canopy Front and Rear and Cut Left Side Canopy 14 8   
103     Oct 04, 2020 Engine Cooling Baffle Work Begins Baffling 4 2   
102     Oct 04, 2020 Engine Wiring and Starter Ground Strap Engine 6 4   
101     Sep 30, 2020 Cut Rear Edge of Canopy (continued) Canopy 2 2   
100     Sep 30, 2020 Cut Rear Edge of Canopy Canopy 14 7   
99     Sep 29, 2020 Begin Fitting New Canopy Canopy 14 8   
98     Sep 27, 2020 Install empennage controls access covers Empennage 1 3   
97     Sep 27, 2020 Reposition Fuel Tank Insulation Fuel System 2 4   
96     Sep 27, 2020 Continue Canopy Fit Adjustments Canopy 8 7   
95     Sep 27, 2020 Programming Dynon Instrument Panel 3 4   
94     Sep 27, 2020 Prepare fuel filler door for paint Cowl 2 3   
93     Sep 26, 2020 Connect Engine Wiring Avionics 6 4   
92     Sep 23, 2020 Adjust Canopy Frame Base Tubes Shorter Canopy 6 5   
91     Sep 23, 2020 Fit Canopy to Windscreen and Canopy Frame Windscreen 3 3   
90     Sep 23, 2020 Refit Windscreen after fitting fuel tank and glare shield. Windscreen 5 4   
89     Sep 23, 2020 Filling Gap On Fuel Filler Door (continued) Cowl 2 2   
88     Sep 23, 2020 Replace pulled rivets with solid countersunk rivets Windscreen 2 2   
87     Sep 22, 2020 Fit Fuel Tank (continued) Fuel System 12 6   
86     Sep 20, 2020 Test Fit Of Fuel Tank Fuel System 2 3   
85     Sep 20, 2020 Cleaning Up Fuselage Rough Edge Fuselage 1 1   
84     Sep 20, 2020 Canopy Outside Latch Handle Canopy 2 2   
83     Sep 20, 2020 Bleeding Landing Gear Brakes Landing Gear 3 5   
82     Sep 20, 2020 Canopy Latch Return Spring Tabs Canopy 2 2   
81     Sep 20, 2020 Fuel Filler Door Gap Cowl 2 4   
80     Sep 16, 2020 Bend Rear Windscreen Bow To Fit Windscreen 3 2   
79     Sep 16, 2020 Fit and Bond Gap in Cowl Fuel Door Cowl 4 3   
78     Sep 16, 2020 Fitting Canopy Latch To Canopy Frame Canopy 6 5   
77     Sep 16, 2020 Aligning Canopy Frame Members Canopy 4 2   
76     Sep 15, 2020 Trim Fuel Door Flange Cowl 1 2   
75     Sep 15, 2020 Canopy Fuel Filler Door Fabrication Cowl 10 3   
74     Sep 15, 2020 Canoy Latch Fitment (continued) Canopy 4.5 5   
73     Sep 15, 2020 Fit and Dress Windscreen Windscreen 3 2   
72     Sep 09, 2020 Trim Upper Rear of Cowl Cowl 3 5   
71     Sep 09, 2020 Aligning Latch Pin Holes Prior to Drilling Canopy 2 1   
70     Sep 09, 2020 Riveting Piano Hinges to Cowl Cowl 2 4   
69     Sep 09, 2020 Remove Fillet on Canopy Latch Canopy 4 2   
68     Sep 09, 2020 Fuel Filler Door Camlock Receiver Cowl 2 2   
67     Sep 08, 2020 Fit Windscreen to Cowl Cowl 6 3   
66     Sep 08, 2020 Attach Camlocks to Lower Front of Cowl Cowl 0.8 1   
65     Sep 08, 2020 Rivet Cowl Camlock Receivers Cowl 4 3   
64     Sep 08, 2020 Dress Rear Canopy Bow Brace Brackets Canopy 1 3   
63     Sep 06, 2020 Canopy Frame Fabrication (continued) Canopy 8 10   
62     Sep 06, 2020 Firewall top flange for mounting cowl Cowl 4 3   
61     Sep 06, 2020 Cowl side retainer brackets Cowl 6 5   
60     Sep 02, 2020 Angle Brackets for Cowl Side Camlocks (continued) Cowl 9 2   
59     Sep 01, 2020 Angle Brackets for Cowl Side Camlocks Cowl 3 3   
58     Aug 25, 2020 Fit Canopy Frame and Drill Holes for Rivets (continued) Canopy 8 5   
57     Aug 25, 2020 Trim Flange For Fuel Filler Door - Make Angle Brackets For Cowl Side Cowl 9 4   
56     Aug 23, 2020 Fit and Secure Check Oil Door and Add Camlocks to Cowl Cowl 9 5   
55     Aug 23, 2020 Fit Canopy Rear Bow Brace and Fit Hinge and Latch Hardware Canopy 9 2   
54     Aug 19, 2020 Engine Oil Dipstick Access Door Cowl 8 3   
53     Aug 18, 2020 Fit Fuel Door to Cowl Cowl 7 6   
52     Aug 18, 2020 Fabrication of Canopy Channel Hinge Side and Slots in Longeron for Latch Canopy 10 6   
51     Aug 17, 2020 Canopy Bow Brace Canopy 4 2   
50     Aug 16, 2020 Cowl Fastener Flange and Cooling Vent Work Cowl 10 7   
49     Aug 16, 2020 Fitting Canopy Bows (continued) Canopy 9.8 2   
48     Aug 12, 2020 Canopy Longeron Reinforcement Canopy 4 3   
47     Aug 12, 2020 flange for quarter-turn camlocks Cowl 3 4   
46     Aug 12, 2020 Harvard Holmes taking on completion of canopy Canopy 12 6   
45     Aug 11, 2020 Cutout for fuel door Cowl 1 1   
44     Aug 09, 2020 Cowl Work Continues Cowl 24 4   
43     Aug 06, 2020 Piano Hinge Installation Cowl 14 4   
42     Aug 02, 2020 Cowl Preliminary Fit Cowl 10 2   
41     Jun 24, 2020 Samson Sonex Procurement Dialogue 12 1   
40     Jun 17, 2020 Fabrication of upper flange on firewall Firewall 2 1   
39     Jun 14, 2020 Reorganize Shop Workshop 9 1   
38     Jun 11, 2020 Hub Spacer Engine 5 2   
37     Feb 26, 2020 Exhaust System Engine 9 6   
36     Feb 16, 2020 Install 20 AMP Alternator Engine 5 1   
35     Feb 09, 2020 Install Wing Rib Wings 5.9 1   
34     Feb 09, 2020 Engine Returns Engine 3 1   
33     Feb 08, 2020 Engine work complete. Engine 50 18   
32     Dec 09, 2019 Wing Rib Wings 0 1   
31     Dec 04, 2019 Canopy Latch Canopy 3 2   
30     Oct 06, 2019 Remove Wing Inner Rib Wings 3 2   
29     Oct 05, 2019 Installation of Avionics (continued) Avionics 30 28   
28     Sep 25, 2019 Install Auto Pilot Servo in Aircraft Avionics 3 1   
27     Sep 25, 2019 Test Instrument Panel In Aircraft Instrument Panel 3 1   
26     Sep 22, 2019 Install Control Stick grips Instrument Panel 5 1   
25     Sep 15, 2019 New Instrument Panel Instrument Panel 8 2   
24     Sep 14, 2019 Installing New Panel in Aircraft Instrument Panel 15 3   
23     Sep 12, 2019 Powering and Testing New Panel Instrument Panel 4 4   
22     Sep 01, 2019 Wing Tips Wings 10 5   
21     Aug 27, 2019 New Instrument Panel Photos Instrument Panel 6   
20     Aug 25, 2019 Building New Panel (continued) Instrument Panel 30 3   
19     Aug 21, 2019 Adjusting elevator control linkage. Controls 4 3   
18     Aug 17, 2019 Building New Panel Instrument Panel 25 4   
17     Jun 20, 2019 ELT and Wing Tips Fuselage 9 4   
16     Jun 10, 2019 N393DB Dialogue 1 1   
15     May 30, 2019 New Instrument Panel Fabrication Instrument Panel 10 2   
14     May 23, 2019 Install instrument panel glare shield extension Instrument Panel 8 6   
13     May 02, 2019 Glare Shield Extension Glare Shield 6 1   
12     Apr 25, 2019 Remove Old Lower Panel and Auto Pilot Servo Instrument Panel 9 5   
11     Mar 28, 2019 Engine work begins Engine 0   
10     Mar 27, 2019 Transport Engine Engine 3 3   
9     Mar 19, 2019 Remove Old Avionics Instrument Panel 12 16   
8     Mar 12, 2019 Remove Engine Engine 4 6   
7     Mar 09, 2019 Removing Old Instrument Panel and Exhaust System Engine 16 11   
6     Mar 09, 2019 Inspect Oil Cooler Baffling 1 2   
5     Mar 09, 2019 Remove Old Lower Panel Instrument Panel 7 4   
4     Feb 17, 2019 Instrument Panel Progress Instrument Panel 5 11   
3     Feb 07, 2019 Organizing the Sonex workshop Workshop 10 7   
2     Feb 02, 2019 Transporting project to workshop Workshop 6 8   
1     Feb 01, 2019 The Don Baldwin Sonex Project Introduction 0   
------------ -------------
Totals1884.3    1216   





NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.