Project: N64BN     -     Project Summary     - Optional PDF document function     - Multi-sectional PDF
Add entry descriptions           Project PDF with: -

Entry #CreatedTitleCategoryHours     Cost # Pictures
1073     Mar 26, 2022 Moving the project Miscellaneous 0 $0.00    6   
1072     Mar 20, 2022 Not transport damage Miscellaneous 0 $0.00    2   
1071     Mar 20, 2022 Moving project Workshop and Supplie 3 $0.00    3   
1070     Mar 02, 2022 New workshop Workshop and Supplie 0 $0.00    0   
1069     Feb 01, 2022 Not building - flying instead Miscellaneous 0 $0.00    0   
1068     Sep 19, 2021 Slight Detour Part II None 0 $0.00    0   
1067     Sep 04, 2021 Slight Detour Part I Training 0.5 $0.00    0   
1066     Aug 28, 2021 Noisy intercom - solved Avionics $0.00    0   
1065     Aug 26, 2021 Noisy intercom - problem Avionics 1 $0.00    0   
1064     Aug 25, 2021 Audio panel configuration Avionics 1 $0.00    1   
1063     Aug 12, 2021 Finishing up snall FW items Firewall 1 $0.00    2   
1062     Aug 10, 2021 I can still squeeze a rivet or three Firewall 1 $0.00    2   
1061     Aug 09, 2021 Alligator squeezer Miscellaneous 1 $0.00    1   
1060     Aug 08, 2021 Bits and pieces Miscellaneous 2 $0.00    2   
1059     Aug 02, 2021 Firewall bracket and nut plates Firewall 1 $0.00    0   
1058     Jul 31, 2021 TO/GA Wired Avionics 2 $0.00    0   
1057     Jul 31, 2021 Voltage Ranges Final-ish Avionics $0.00    1   
1056     Jul 30, 2021 Voltage ranges first guess Avionics 1.50 $0.00    1   
1055     Jul 25, 2021 Firewall review and other outstanding issues Firewall 2 $0.00    1   
1054     Jul 20, 2021 Dimmer install Instrument Panel 3 $0.00    4   
1053     Jul 18, 2021 Timer circuit Avionics 1 $0.00    2   
1052     Jul 17, 2021 Annunciators Test Avionics 2 $0.00    1   
1051     Jul 15, 2021 Re-pinning VP-X Avionics 2 $0.00    1   
1050     Jul 13, 2021 VP-X Reconfiguration Avionics 1 $0.00    1   
1049     Jul 13, 2021 Hangar check Workshop 0 $0.00    0   
1048     Jul 11, 2021 Some more configuration of G3x Avionics 2 $0.00    4   
1047     Jul 05, 2021 Getting some air to the GTX 45R Avionics 1 $0.00    2   
1046     Jul 04, 2021 Checked Push To Command pin Avionics 3 $0.00    2   
1045     Jul 02, 2021 Hello GTN 649Xi II Avionics 1 $0.00    0   
1044     Jun 26, 2021 Bye bye GTN Avionics 1 $0.00    0   
1043     Jun 24, 2021 GTN Telligence test Avionics 1 $0.00    0   
1042     Jun 23, 2021 CO monitor alert Avionics $0.00    0   
1041     Jun 22, 2021 Good new bad news Avionics 1 $0.00    0   
1040     Jun 21, 2021 GTN TX and GTR 20 issues Avionics $0.00    2   
1039     Jun 20, 2021 CO monitor Avionics 3 $0.00    2   
1038     Jun 19, 2021 Flaps and more configuration Avionics 2 $0.00    1   
1037     Jun 14, 2021 Complete power up - No smoke! Avionics 5 $0.00    2   
1036     Jun 13, 2021 Antennas Avionics 1 $0.00    2   
1035     Jun 09, 2021 More wiring Avionics 4 $0.00    0   
1034     Jun 08, 2021 Flap motor Avionics 0.5 $0.00    2   
1033     Jun 06, 2021 CAN Bus Avionics 3 $0.00    1   
1032     Jun 05, 2021 GTX 45R backplate Avionics 2 $0.00    1   
1031     Jun 05, 2021 Avionics tray layout Avionics 1 $0.00    2   
1030     Jun 04, 2021 G5 Connected Avionics 1 $0.00    1   
1029     Jun 03, 2021 Missing Garmin stuff Avionics 0 $0.00    1   
1028     Jun 02, 2021 GDU 460 config module Avionics 1 $0.00    3   
1027     May 30, 2021 Wires, so many wires Avionics 5 $0.00    0   
1026     May 29, 2021 Connected VP-X Switches Avionics 5 $0.00    1   
1025     May 27, 2021 First power test Avionics 3 $0.00    4   
1024     May 27, 2021 VP-X J10 Avionics 1 $0.00    1   
1023     May 26, 2021 Assembled panel Avionics 2 $0.00    3   
1022     May 26, 2021 VP-X J8 - First Pins connected Avionics 2 $0.00    1   
1021     May 25, 2021 VP-X Configuration Avionics 1 $0.00    0   
1020     May 24, 2021 Panel/Subpanel Jig Avionics 1 $0.00    2   
1019     May 23, 2021 Subpanel out of fuselage Avionics 2 $0.00    2   
1018     May 22, 2021 Swivel Fittings and Studs Firewall $0.00    3   
1017     May 21, 2021 More 3D Miscellaneous 0 $0.00    1   
1016     May 20, 2021 Preparing for harness construction Avionics 0 $0.00    3   
1015     May 19, 2021 Migrated to EAA Builders Log Tools 0 $0.00    1   
1014     May 18, 2021 Dimmer knobs Instrument Panel 0.1 $0.00    4   
1013     May 17, 2021 Rethinking the parking brake Fuselage 1 $0.00    2   
1012     May 15, 2021 LRU placement Avionics 2 $0.00    5   
1011     May 14, 2021 VP-X mounting Avionics 2 $0.00    2   
1010     May 12, 2021 Avionics tray cut-out Avionics $0.00    4   
1009     May 12, 2021 GDL 51R and Enginebridge Avionics $0.00    3   
1008     May 12, 2021 Heater control cable clearance Avionics 1 $0.00    3   
1007     May 11, 2021 GTX 45 brackets Avionics 1 $0.00    1   
1006     May 10, 2021 Positioned the GTX 45 tray Avionics $0.00    3   
1005     May 09, 2021 Lightened the GMA tray straps Instrument Panel 1 $0.00    2   
1004     May 04, 2021 More placement planning - Firewall measurement Fuselage 2 $0.00    3   
1003     May 04, 2021 Moee Avionics $0.00    0   
1002     Apr 29, 2021 GMA Straps Instrument Panel 1 $0.00    2   
1001     Apr 28, 2021 Fitting forward fuselage ribs Instrument Panel 1.5 $0.00    2   
1000     Apr 26, 2021 Improving access to avionics bay Fuselage 2 $0.00    3   
999     Apr 25, 2021 Radiostack reboot Instrument Panel 2 $0.00    2   
998     Oct 03, 2020 SL-00014 RV-7/8/9 Tailcone Stiffener Fuselage 1 $0.00    4   
997     Feb 28, 2020 Test fitted the GTN and GMA Avionics $0.00    2   
996     Jan 23, 2020 Duplicated holder for landing/taxi lights Lighting 2 $0.00    2   
995     Jan 18, 2020 Avionics tray Avionics 3 $0.00    3   
994     Jan 12, 2020 Panel fun day Avionics 2 $0.00    7   
993     Jan 12, 2020 No GTN 650 for me - Welcome GTN 650 Xi Avionics $0.00    1   
992     Jan 11, 2020 Vent angles Lighting 1 $0.00    3   
991     Jan 09, 2020 Started fitting the GTN tray Avionics 1 $0.00    2   
990     Jan 09, 2020 GTN cutout Avionics 3 $0.00    3   
989     Jan 08, 2020 Panel arrived Avionics 3 $0.00    7   
988     Dec 18, 2019 Panel cut, labeled and painted Avionics 0 $0.00    6   
987     Nov 13, 2019 First adjustment sent to Steinar Avionics 1 $0.00    1   
986     Nov 08, 2019 McFarlane cables Firewall 0 $0.00    1   
985     Nov 04, 2019 First draft to Steinair Avionics $0.00    1   
984     Nov 03, 2019 Tested out control cables routing Avionics $0.00    2   
983     Oct 30, 2019 Control support Avionics 1 $0.00    1   
982     Oct 28, 2019 Tested panel ergonomics Avionics 1 $0.00    1   
981     Oct 27, 2019 Riveted hinges to the seats Avionics 2 $0.00    3   
980     Oct 25, 2019 3D/2D October 2019 Avionics 0 $0.00    4   
979     Oct 23, 2019 Panel mock-up Avionics 3 $0.00    4   
978     Oct 10, 2019 Panel layout Avionics 1 $0.00    1   
977     Sep 29, 2019 Playing with 3D again Avionics 1 $0.00    2   
976     Sep 25, 2019 More 3D fun Avionics 1 $0.00    1   
975     Sep 23, 2019 Starting avionics placements Avionics 2 $0.00    2   
974     Oct 16, 2018 FiberFrax fitting Firewall Forward 2.00 $0.00    3   
973     Oct 10, 2018 Classic Aero Seats Finishing 0.00 $0.00    2   
972     Oct 06, 2018 Eyeball fitting Firewall Forward 1.00 $0.00    3   
971     Oct 06, 2018 FW Titanium sheet Firewall Forward 2.00 $0.00    2   
970     Oct 03, 2018 Firewall clamps Firewall Forward 1.00 $0.00    2   
969     Sep 30, 2018 Prepping for FW insulation Firewall Forward 3.00 $0.00    3   
968     Sep 29, 2018 Firewall stifferners Firewall Forward 2.00 $0.00    2   
967     Sep 23, 2018 Canopy bumpers Finishing 3.00 $0.00    3   
966     Sep 22, 2018 Control Cable Penetrations Firewall Forward 1.00 $0.00    2   
965     Sep 19, 2018 Finished middle decks Fuselage 1.00 $0.00    1   
964     Sep 16, 2018 Oil separator and forest of tabs Firewall Forward 1.00 $0.00    1   
963     Sep 15, 2018 ANL fitting Firewall Forward 2.00 $0.00    2   
962     Sep 14, 2018 Cable penetrations Firewall Forward 1.50 $0.00    2   
961     Sep 12, 2018 Firewall Insulation Firewall Forward 1.00 $0.00    1   
960     Sep 11, 2018 Battery case Firewall Forward 1.00 $0.00    1   
959     Sep 11, 2018 Final drilled the engine mount Engine 2.00 $0.00    1   
958     Sep 10, 2018 Fixing the wingtip countersinks Wings 1.50 $0.00    1   
957     Sep 09, 2018 Fixing the wingtip countersinks Wings 1.00 $0.00    1   
956     Sep 09, 2018 Nav/strobe lights Avionics 1.50 $0.00    2   
955     Sep 08, 2018 Priming and riveting all over the place Miscellaneous 2.00 $0.00    3   
954     Sep 01, 2018 Squeezer removal Miscellaneous 1.00 $0.00    2   
953     Aug 29, 2018 Cabin frame and F-732A channel Finishing 1.00 $0.00    2   
952     Aug 29, 2018 Middle deck riveting Fuselage 2.00 $0.00    3   
951     Aug 27, 2018 Baggage floor cargo mat Finishing 2.00 $0.00    1   
950     Aug 26, 2018 Reveal, La Fuselage ! Fuselage 0.10 $0.00    1   
949     Aug 26, 2018 Finishing F-787 Stiffener web Fuselage 1.00 $0.00    2   
948     Aug 26, 2018 Finishing the cabin frame Fuselage 1.00 $0.00    1   
947     Aug 26, 2018 Middle deck Fuselage 1.00 $0.00    1   
946     Aug 25, 2018 Shoulder harness anchor attachments Fuselage 1.00 $0.00    2   
945     Aug 25, 2018 Finishing F-705 riveting Fuselage 1.50 $0.00    1   
944     Aug 23, 2018 Started the finishing F-705 riveting Fuselage 1.50 $0.00    3   
943     Aug 22, 2018 Top skin riveting Fuselage 3.00 $0.00    1   
942     Aug 21, 2018 Top skin riveting Fuselage 3.00 $0.00    1   
941     Aug 20, 2018 Top skin riveting Fuselage 3.00 $0.00    0   
940     Aug 19, 2018 ELT antenna and Beacon Avionics 1.00 $0.00    1   
939     Aug 19, 2018 Prep for top skin riveting Fuselage 2.00 $0.00    1   
938     Aug 19, 2018 Top skin riveting Fuselage 2.00 $0.00    3   
937     Aug 17, 2018 Assisted another builder Practice 0.00 $0.00    0   
936     Aug 17, 2018 Riveted seat panels II Finishing 2.00 $0.00    1   
935     Aug 15, 2018 Beacon stiffener Lighting 2.00 $0.00    1   
934     Aug 13, 2018 Seat panels Finishing 2.00 $0.00    2   
933     Aug 11, 2018 Beacon fitting Lighting 1.00 $0.00    1   
932     Aug 11, 2018 Primed the beacon stiffener Lighting 1.00 $0.00    1   
931     Aug 11, 2018 Static line adjustment Avionics 1.00 $0.00    1   
930     Aug 08, 2018 Tested new-old squeezer Fuselage 1.00 $0.00    2   
929     Aug 06, 2018 Primed the shortened console Finishing 1.50 $0.00    2   
928     Aug 05, 2018 Tested rudder/tailspring clearance Empennage 1.00 $0.00    2   
927     Aug 02, 2018 Console adjustment Fuselage 2.00 $0.00    2   
926     Aug 01, 2018 Avionics Avionics 1.00 $0.00    3   
925     Jul 29, 2018 Wingtip lenses Wings 2.00 $0.00    2   
924     Jul 26, 2018 Ordered seats from Classic Aero Design while in Os Miscellaneous 0.00 $0.00    0   
923     Jul 26, 2018 Vic Syracuse's talk at Oshkosh Miscellaneous 0.00 $0.00    0   
922     Jul 21, 2018 Wingtip trailing edge adjustment 4 Wings 1.00 $0.00    1   
921     Jul 20, 2018 Wingtip trailing edge adjustment 3 Wings 2.00 $0.00    3   
920     Jul 19, 2018 Wingtip trailing edge adjustment 2 Wings 2.00 $0.00    1   
919     Jul 18, 2018 Wingtip trailing edge adjustment 1 Wings 1.50 $0.00    3   
918     Jul 17, 2018 Wingtip notes Wings 0.50 $0.00    0   
917     Jul 16, 2018 VOR antenna decision Avionics 2.00 $0.00    2   
916     Jul 15, 2018 VOR antenna thinkering Avionics 2.00 $0.00    1   
915     Jul 14, 2018 Wingtip adjustments Wings 1.00 $0.00    2   
914     Jul 14, 2018 Wingtip riveting Wings 1.00 $0.00    2   
913     Jul 07, 2018 Upper rudder fairing done Empennage 1.00 $0.00    3   
912     Jul 06, 2018 Priming rudder and VS Empennage 1.50 $0.00    2   
911     Jul 05, 2018 Oil cooler mounting option Firewall Forward 0.50 $0.00    1   
910     Jul 04, 2018 Primed the HS fairings Empennage 2.00 $0.00    1   
909     Jul 01, 2018 HS fairings Empennage 1.00 $0.00    2   
908     Jun 24, 2018 Priming with K36 Empennage 3.00 $0.00    2   
907     Jun 21, 2018 Wingtip-tip Empennage 1.00 $0.00    2   
906     Jun 17, 2018 Fairing finishing Empennage 3.00 $0.00    3   
905     Jun 16, 2018 Fairing finishing Empennage 2.00 $0.00    1   
904     Jun 15, 2018 More Tail light fitting Empennage 2.00 $0.00    2   
903     Jun 14, 2018 Rudder/VS transition finishing up Empennage 2.00 $0.00    1   
902     Jun 13, 2018 Rudder/VS transition perfectioningering… Empennage 2.00 $0.00    3   
901     Jun 12, 2018 More Tail light fitting Empennage 1.00 $0.00    2   
900     Jun 12, 2018 Rudder/VS transition perfecting… Empennage 1.00 $0.00    2   
899     Jun 10, 2018 Shaping the VS fairing Empennage 2.00 $0.00    2   
898     Jun 09, 2018 Fitting of VS fairing Empennage 1.00 $0.00    1   
897     Jun 09, 2018 More Tail light fitting Empennage 1.00 $0.00    1   
896     Jun 09, 2018 Bottom rudder fairing adjustment Empennage 2.00 $0.00    3   
895     Jun 09, 2018 Fitting of VS fairing Empennage 2.00 $0.00    3   
894     Jun 08, 2018 Started Tail light fitting Empennage 3.00 $0.00    3   
893     Jun 06, 2018 Bottom rudder fairing glassing Empennage 2.00 $0.00    2   
892     Jun 05, 2018 Upper rudder fairing Empennage 1.00 $0.00    1   
891     Jun 04, 2018 Upper Rudder fairing Empennage 1.00 $0.00    1   
890     Jun 03, 2018 Drilled the wingtip Wings 2.00 $0.00    0   
889     Jun 03, 2018 Wing tip hinge Wings 2.00 $0.00    3   
888     Jun 02, 2018 Drilled left wing tip Wings 1.00 $0.00    2   
887     Jun 02, 2018 Elevator fairings Empennage 1.50 $0.00    2   
886     Jun 02, 2018 Started wing tips Wings 3.00 $0.00    3   
885     May 31, 2018 Grips for the stick Finishing 0.10 $0.00    3   
884     May 31, 2018 Elevator fairings Empennage 1.00 $0.00    3   
883     May 30, 2018 Elevator fairing Empennage 1.50 $0.00    0   
882     May 29, 2018 Elevator, HS and rudder fairings Empennage 2.00 $0.00    3   
881     May 28, 2018 Rudder fairing cut out II Empennage 2.00 $0.00    2   
880     May 27, 2018 Drilled HS fairing Empennage 1.00 $0.00    1   
879     May 27, 2018 Lower rudder fairing Empennage 1.00 $0.00    2   
878     May 27, 2018 Fixed rudder fairing Empennage 2.00 $0.00    1   
877     May 26, 2018 Elevator fairing Empennage 3.00 $0.00    2   
876     May 13, 2018 Installed the rear elevator pushrod Fuselage 1.50 $0.00    0   
875     May 11, 2018 Drilled out another floor panel Fuselage 1.00 $0.00    0   
874     May 08, 2018 Drilled out a floor panel Fuselage 1.50 $0.00    0   
873     May 07, 2018 Lower empennage fairing Empennage 2.00 $0.00    1   
872     May 06, 2018 Empennage hardware Fuselage 2.00 $0.00    3   
871     May 05, 2018 Primed empennage attachment parts Empennage 2.00 $0.00    2   
870     May 04, 2018 Rudder stop Empennage 3.00 $0.00    3   
869     May 03, 2018 Elevator horns spacers Empennage 1.50 $0.00    3   
868     May 02, 2018 Drilling vertical stabilizer - 6 Fuselage 2.00 $0.00    1   
867     May 01, 2018 Drilling vertical stabilizer - 4 Fuselage 1.00 $0.00    1   
866     May 01, 2018 Drilling vertical stabilizer - 3 Fuselage 2.00 $0.00    3   
865     May 01, 2018 Drilling vertical stabilizer - 5 Fuselage 2.00 $0.00    0   
864     Apr 30, 2018 Drilling vertical stabilizer - 1 Fuselage 2.00 $0.00    3   
863     Apr 30, 2018 Drilling vertical stabilizer - 2 Fuselage 2.00 $0.00    3   
862     Apr 28, 2018 Pitot access panel Wings 2.00 $0.00    3   
861     Apr 28, 2018 SB 14-01-31 - 8 Empennage 2.00 $0.00    1   
860     Apr 27, 2018 SB 14-01-31 - 7 Empennage 2.00 $0.00    2   
859     Apr 26, 2018 SB 14-01-31 - 6 Empennage 3.00 $0.00    3   
858     Apr 23, 2018 SB 14-01-31 - 5 Empennage 1.00 $0.00    0   
857     Apr 22, 2018 SB 14-01-31 - 4 Empennage 1.00 $0.00    3   
856     Apr 22, 2018 SB 14-01-31 - 3 Empennage 2.00 $0.00    3   
855     Apr 21, 2018 SB 14-01-31 - 2 Empennage 1.00 $0.00    3   
854     Apr 21, 2018 SB 14-01-31 - 1 Empennage 2.00 $0.00    3   
853     Apr 19, 2018 Elevator Horns 2 Empennage 1.50 $0.00    2   
852     Apr 18, 2018 Elevator Horns 1 Empennage 1.50 $0.00    3   
851     Apr 16, 2018 Elevator hinges Empennage 0.50 $0.00    1   
850     Apr 15, 2018 Fitting the HS 2 - Checking area to be drilled Empennage 0.50 $0.00    2   
849     Apr 15, 2018 Fitting the HS 3 - First holes Empennage 0.50 $0.00    2   
848     Apr 15, 2018 Fitting the HS 4 - Finishing up Empennage 1.00 $0.00    1   
847     Apr 15, 2018 Fitting the HS 4 - Second set of holes Empennage 1.00 $0.00    3   
846     Apr 15, 2018 Fitting the HS 1 - Clamping in place Empennage 2.00 $0.00    3   
845     Apr 14, 2018 Horizontal Stabilizer Empennage 1.00 $0.00    1   
844     Apr 09, 2018 Elevator trim tab hinge Empennage 0.50 $0.00    1   
843     Apr 09, 2018 Now the wings are done Wings 0.50 $0.00    2   
842     Apr 08, 2018 Finished the left wing Wings 4.00 $0.00    3   
841     Apr 07, 2018 Started the last wing skin riveting Wings 3.00 $0.00    0   
840     Apr 05, 2018 Brace for pitot wiring and stall warning wire Wings 2.00 $0.00    0   
839     Mar 31, 2018 Trim tab III Empennage 3.00 $0.00    2   
838     Mar 27, 2018 Right wing outer bottom skin - 4 Wings 1.50 $0.00    1   
837     Mar 26, 2018 Right wing outer bottom skin - 3 Wings 1.50 $0.00    0   
836     Mar 25, 2018 Right wing outer bottom skin - 2 Wings 4.00 $0.00    1   
835     Mar 24, 2018 Right wing outer bottom skin - 1 Wings 4.00 $0.00    2   
834     Mar 23, 2018 Finishing Stall warning inspection cover Wings 1.50 $0.00    3   
833     Mar 20, 2018 SB 16-03-28 - 3 Wings 1.00 $0.00    2   
832     Mar 20, 2018 Started stall warning inspection cover Wings 1.50 $0.00    1   
831     Mar 19, 2018 Elevator fairings Empennage 1.00 $0.00    3   
830     Mar 18, 2018 SB 16-03-28 - 2 Wings 1.00 $0.00    1   
829     Mar 18, 2018 SB 16-03-28 - 1 Wings 2.00 $0.00    3   
828     Mar 14, 2018 Primed and painted the console Finishing 2.00 $0.00    1   
827     Mar 12, 2018 Butchered the elevator trim tab Empennage 1.00 $0.00    0   
826     Mar 11, 2018 Modified the elevator trim tab Empennage 1.00 $0.00    0   
825     Mar 10, 2018 Primed and painted new tunnel cover Fuselage 2.00 $0.00    0   
824     Mar 07, 2018 New flap motor Fuselage 2.00 $0.00    0   
823     Feb 11, 2018 Decks in baggage area Fuselage 4.00 $0.00    3   
822     Feb 10, 2018 New tunnel cover Finishing 3.00 $0.00    1   
821     Feb 10, 2018 Remaining canopy rivets Finishing 3.00 $0.00    3   
820     Feb 08, 2018 New C-710 pushrod Finishing 3.00 $0.00    2   
819     Feb 05, 2018 F-785A Backrest Brace and cross bar Fuselage 1.00 $0.00    3   
818     Feb 04, 2018 Deburred, primed and painted Almost RV-14 Fuselage 4.00 $0.00    1   
817     Jan 28, 2018 Almost RV-14 install - 10 Fuselage 1.50 $0.00    2   
816     Jan 27, 2018 Almost RV-14 install - 9 Fuselage 1.50 $0.00    1   
815     Jan 27, 2018 Almost RV-14 install - 8 Fuselage 2.00 $0.00    3   
814     Jan 22, 2018 Almost RV-14 install - 7 Fuselage 2.00 $0.00    2   
813     Jan 21, 2018 Almost RV-14 install - 6 Fuselage 3.50 $0.00    2   
812     Jan 20, 2018 Almost RV-14 install - 5 Fuselage 1.50 $0.00    0   
811     Jan 19, 2018 Almost RV-14 install - 4 Fuselage 1.00 $0.00    3   
810     Jan 19, 2018 Almost RV-14 install - 1 Fuselage 2.00 $0.00    2   
809     Jan 19, 2018 Almost RV-14 install - 2 Fuselage 2.00 $0.00    3   
808     Jan 19, 2018 Almost RV-14 install - 3 Fuselage 2.00 $0.00    3   
807     Jan 14, 2018 Dimpled both bottom outboard skin Wings 2.00 $0.00    0   
806     Jan 13, 2018 Almost RV-14 Fuselage 1.50 $0.00    3   
805     Jan 12, 2018 Riveted inspection cover nutplates Wings 1.00 $0.00    0   
804     Jan 08, 2018 Riveted the elevator pushrod Fuselage 1.00 $0.00    1   
803     Jan 07, 2018 Primed the outboard bottom skins Wings 4.50 $0.00    2   
802     Jan 06, 2018 Primed the elevator pushrod Fuselage 2.00 $0.00    0   
801     Dec 26, 2017 Modified grommets Wings 0.50 $0.00    3   
800     Dec 22, 2017 Cut and drilled the elevator pushrod Wings 1.50 $0.00    0   
799     Dec 20, 2017 Aileron pushrod Wings 2.00 $0.00    0   
798     Dec 18, 2017 Finished the right inboard bottom skin Wings 1.00 $0.00    0   
797     Dec 17, 2017 Continue rivet the right inboard bottom skin Wings 6.50 $0.00    2   
796     Dec 16, 2017 Drilled the armrest padding Finishing 1.00 $0.00    1   
795     Dec 16, 2017 Riveted on the right flap brace Wings 3.00 $0.00    0   
794     Dec 14, 2017 Riveted on nutplate on the flap brace Wings 0.50 $0.00    0   
793     Dec 13, 2017 Primed the right flap brace Wings 2.00 $0.00    0   
792     Dec 12, 2017 Made split hinge pins for flaps Wings 1.00 $0.00    0   
791     Dec 11, 2017 Dimpling the right inboard bottom skin Wings 2.00 $0.00    0   
790     Dec 11, 2017 Drilled the right flap hinge Wings 3.00 $0.00    0   
789     Dec 10, 2017 Drilled the right flap hinge Wings 1.50 $0.00    1   
788     Dec 09, 2017 Riveted on left inboard bottom skin Wings 8.00 $0.00    3   
787     Dec 06, 2017 Prosealed glare shield vents Finishing 0.50 $0.00    1   
786     Dec 06, 2017 Added RTV to the conduits Wings 1.00 $0.00    2   
785     Dec 04, 2017 Prepping for skin riveting Wings 0.50 $0.00    0   
784     Dec 03, 2017 Dimpled left inboard bottom skin Wings 2.50 $0.00    2   
783     Dec 02, 2017 Riveted the bulkhead doubler Wings 2.50 $0.00    3   
782     Nov 27, 2017 Primed the bulkhead doubler Wings 1.00 $0.00    0   
781     Nov 26, 2017 Installed pitot and AOA bulkhead fitting Wings 1.50 $0.00    1   
780     Nov 26, 2017 Riveted the latch handle angles Finishing 2.00 $0.00    1   
779     Nov 25, 2017 Primed the inboard bottom skins Wings 2.50 $0.00    1   
778     Nov 24, 2017 Deburred the inboard bottom skins Wings 3.00 $0.00    0   
777     Nov 11, 2017 Finished the latch bearing and cover Finishing 1.50 $0.00    2   
776     Nov 06, 2017 Continued the latch bearing Finishing 0.50 $0.00    0   
775     Nov 05, 2017 Continued the latch bearing Finishing 1.50 $0.00    0   
774     Nov 04, 2017 Started new latch bearing Finishing 1.50 $0.00    1   
773     Oct 23, 2017 Installed the latch handle and lock Finishing 1.00 $0.00    1   
772     Oct 21, 2017 Painted the latch hardware Finishing 2.00 $0.00    0   
771     Oct 18, 2017 Painted the lock guide hardware Finishing 1.50 $0.00    0   
770     Oct 17, 2017 Shaped the lock guide hardware Finishing 2.00 $0.00    0   
769     Oct 16, 2017 Riveted side skirts Finishing 1.00 $0.00    3   
768     Oct 15, 2017 Used the latch install template for lock install Finishing 3.00 $0.00    3   
767     Oct 14, 2017 Made cover for the latch bearing Finishing 2.00 $0.00    2   
766     Oct 14, 2017 Sikaflexed the side skirts Finishing 2.00 $0.00    2   
765     Oct 13, 2017 Started working on the canopy latch Finishing 1.00 $0.00    0   
764     Oct 11, 2017 Finished the new latch bearing cover Finishing 1.50 $0.00    2   
763     Oct 04, 2017 Engine arrives Engine 1.00 $0.00    3   
762     Sep 30, 2017 Cut opening for canopy lift tab Finishing 2.50 $0.00    2   
761     Sep 29, 2017 Marked up slot for canopy lifting tab Finishing 1.00 $0.00    1   
760     Sep 22, 2017 Engine assembly Day 2 Engine 8.00 $0.00    3   
759     Sep 21, 2017 Engine assembly Day 1 Engine 8.00 $0.00    3   
758     Sep 19, 2017 Primed the canopy side skirts Finishing 2.00 $0.00    0   
757     Sep 17, 2017 Finished the canopy skirts Finishing 3.00 $0.00    3   
756     Sep 03, 2017 Powder coated the grills Finishing 2.00 $0.00    3   
755     Aug 27, 2017 Fitted and drilled the canopy side skirts Finishing 3.50 $0.00    0   
754     Aug 23, 2017 Made dies for grill forming Finishing 1.00 $0.00    0   
753     Aug 20, 2017 Making the glare shield inlay Finishing 4.00 $0.00    3   
752     Aug 18, 2017 Glare shield padding Finishing 1.00 $0.00    2   
751     Aug 15, 2017 Made a delrin strip for the 2nd canopy latch Finishing 1.50 $0.00    0   
750     Aug 14, 2017 Adjusted the latch. Finishing 1.00 $0.00    0   
749     Aug 14, 2017 Made slot for locking mechanism Fuselage 1.00 $0.00    0   
748     Aug 13, 2017 Test sanding sikaflex Finishing 1.00 $0.00    1   
747     Aug 13, 2017 Installed canopy latch lug and guides Finishing 4.00 $0.00    3   
746     Aug 12, 2017 Creating glare shield template Finishing 2.00 $0.00    3   
745     Aug 12, 2017 Refining the sikaflex beads Finishing 2.00 $0.00    3   
744     Aug 11, 2017 Prepping for Sikaflex Finishing 1.00 $0.00    2   
743     Aug 11, 2017 Sikaflexed in place Finishing 4.00 $0.00    3   
742     Aug 10, 2017 Final prep before Sikaflex day Finishing 3.00 $0.00    0   
741     Aug 09, 2017 Masked and tested canopy clamping Finishing 3.00 $0.00    0   
740     Aug 08, 2017 Painted the canopy frame Finishing 2.00 $0.00    2   
739     Aug 07, 2017 Finished the canopy install angles Finishing 2.00 $0.00    0   
738     Aug 06, 2017 Prepping the canopy frame Finishing 1.00 $0.00    0   
737     Aug 06, 2017 Started canopy install angles Finishing 3.00 $0.00    3   
736     Aug 05, 2017 Glare shield smoothing Finishing 2.00 $0.00    1   
735     Aug 05, 2017 Riveted on the front decks Fuselage 4.00 $0.00    3   
734     Aug 04, 2017 Finishing the canopy gaps Finishing 1.00 $0.00    0   
733     Aug 03, 2017 Further smoothing the canopy gaps Finishing 2.00 $0.00    0   
732     Aug 02, 2017 Smoothing canopy gaps Finishing 2.50 $0.00    2   
731     Aug 01, 2017 Filling canopy gaps Finishing 2.50 $0.00    2   
730     Jul 31, 2017 Strut anchors II Finishing 1.50 $0.00    2   
729     Jul 30, 2017 Drilled the panel attach angles Fuselage 3.00 $0.00    3   
728     Jul 29, 2017 Canopy braces riveted Finishing 6.00 $0.00    0   
727     Jul 28, 2017 Started riveting canopy skin Finishing 6.00 $0.00    3   
726     Jul 27, 2017 Made openings for vent fans Finishing 2.50 $0.00    2   
725     Jul 20, 2017 Vent fan mounting Finishing 2.00 $0.00    1   
724     Jul 18, 2017 Vent openings Finishing 1.50 $0.00    0   
723     Jul 17, 2017 Vent openings Finishing 1.00 $0.00    0   
722     Jul 16, 2017 Painted canopy frame Finishing 3.00 $0.00    2   
721     Jul 16, 2017 Finished new the front decks Fuselage 4.00 $0.00    0   
720     Jul 15, 2017 New front decks Fuselage 4.00 $0.00    3   
719     Jul 12, 2017 Deburr and dimple canopy skin Finishing 2.00 $0.00    2   
718     Jul 11, 2017 More canopy spacers Finishing 2.00 $0.00    0   
717     Jul 09, 2017 Primed the canopy parts Finishing 3.00 $0.00    3   
716     Jul 08, 2017 Drilled the canopy braces to the skin Finishing 4.00 $0.00    3   
715     Jul 07, 2017 Drilling the canopy braces Finishing 2.00 $0.00    1   
714     Jul 03, 2017 Started canopy braces Finishing 1.00 $0.00    0   
713     Jun 24, 2017 Final shaping the canopy skin Finishing 2.00 $0.00    0   
712     Jun 17, 2017 Red Cube Firewall Forward 0.50 $0.00    1   
711     Jun 14, 2017 Deburred the canopy frame Finishing 2.00 $0.00    0   
710     Jun 13, 2017 Drilled the canopy skin Finishing 1.50 $0.00    2   
709     Jun 11, 2017 Left canopy spacers Finishing 1.50 $0.00    2   
708     Jun 10, 2017 Right canopy spacers Finishing 4.00 $0.00    3   
707     May 28, 2017 Filling the canopy gaps step 2 Finishing 1.50 $0.00    2   
706     May 28, 2017 Finished riveting the canopy frame Finishing 1.50 $0.00    0   
705     May 28, 2017 Filling the canopy gaps step 1 Finishing 4.50 $0.00    3   
704     May 27, 2017 Started figuring out side skirts Finishing 2.00 $0.00    0   
703     May 26, 2017 Canopy frame final drilling and riveting Finishing 2.50 $0.00    3   
702     May 23, 2017 Ordered new front decks Fuselage 0.00 $0.00    0   
701     May 18, 2017 Ball Stud Mount Fuselage 0.50 $0.00    0   
700     May 17, 2017 Trimming the canopy skin Finishing 1.50 $0.00    0   
699     May 16, 2017 More trimming canopy Finishing 2.00 $0.00    3   
698     May 16, 2017 New canopy skin Finishing 2.00 $0.00    0   
697     May 15, 2017 Minor canopy adjustment Finishing 1.50 $0.00    0   
696     May 14, 2017 Trimming aft window Finishing 2.00 $0.00    1   
695     May 14, 2017 Further trimming of canopy Finishing 3.00 $0.00    1   
694     May 13, 2017 Post cut pictures Finishing 0.50 $0.00    2   
693     May 13, 2017 The big cut Finishing 2.00 $0.00    3   
692     May 13, 2017 Canopy trimming Finishing 4.00 $0.00    2   
691     May 11, 2017 Lady gotta new hat Finishing 3.00 $0.00    2   
690     May 09, 2017 Lowered the fuselage cradle Fuselage 2.00 $0.00    0   
689     May 08, 2017 Strut hardware Finishing 1.00 $0.00    3   
688     May 07, 2017 Put fuselage on cradle Fuselage 2.00 $0.00    0   
687     May 07, 2017 Avionics alternative Avionics 3.00 $0.00    1   
686     Apr 30, 2017 Fuselage cradle Fuselage 2.00 $0.00    0   
685     Apr 29, 2017 Trimming canopy Finishing 3.00 $0.00    1   
684     Apr 28, 2017 Prepping the canopy for trimming Finishing 1.00 $0.00    1   
683     Apr 26, 2017 Primed and painted F-705 angles Fuselage 1.50 $0.00    0   
682     Apr 23, 2017 New F-705 angles Fuselage 2.00 $0.00    1   
681     Apr 23, 2017 Strut hardware Finishing 2.00 $0.00    2   
680     Apr 22, 2017 Cabin looking finished Fuselage 0.50 $0.00    2   
679     Apr 22, 2017 Riveted forward decks Fuselage 4.00 $0.00    3   
678     Apr 20, 2017 Painted F-704 Fuselage 2.00 $0.00    0   
677     Apr 18, 2017 Strut hardware Finishing 1.50 $0.00    0   
676     Apr 17, 2017 Riveted on the panel angles on the forward decks Fuselage 1.00 $0.00    2   
675     Apr 17, 2017 Strut mounting hardware Fuselage 2.50 $0.00    3   
674     Apr 16, 2017 Continued strut hardware Finishing 2.00 $0.00    0   
673     Apr 16, 2017 Replaced canopy skin Finishing 2.00 $0.00    0   
672     Apr 15, 2017 Started strut hardware Finishing 1.50 $0.00    0   
671     Apr 14, 2017 Pained the decks and canopy frame Finishing 1.50 $0.00    0   
670     Apr 13, 2017 Primed frame and canopy deck Finishing 3.00 $0.00    0   
669     Apr 11, 2017 Stripped canopy deck Fuselage 0.50 $0.00    1   
668     Apr 09, 2017 Checked the positioning of the canopy frame Finishing 1.00 $0.00    0   
667     Apr 08, 2017 Riveted doublers and stiffeners to aft top skin Fuselage 1.00 $0.00    1   
666     Apr 06, 2017 Aft fuselage conduits Fuselage 0.50 $0.00    0   
665     Apr 05, 2017 Dimpled the canopy braces Finishing 1.00 $0.00    0   
664     Apr 05, 2017 Dimpled the aft top skin Avionics 1.50 $0.00    1   
663     Apr 04, 2017 Deburring canopy braces Fuselage 1.00 $0.00    0   
662     Apr 02, 2017 ELT doubler riveted Fuselage 1.00 $0.00    1   
661     Apr 01, 2017 Riveted the AHRS rib Fuselage 2.00 $0.00    0   
660     Mar 31, 2017 Primed and painted aft top skin Fuselage 2.50 $0.00    2   
659     Mar 30, 2017 Deburred the canopy braces Fuselage 1.50 $0.00    0   
658     Mar 27, 2017 Primed the click-bond areas Fuselage 1.50 $0.00    2   
657     Mar 26, 2017 Prepping Aft Top Skin Fuselage 2.00 $0.00    0   
656     Mar 25, 2017 Click-bond anchors Fuselage 1.50 $0.00    0   
655     Mar 22, 2017 Static line Fuselage 1.50 $0.00    3   
654     Mar 20, 2017 Riveted the canopy frame sides Fuselage 1.00 $0.00    3   
653     Mar 19, 2017 Primed the canopy frame components Fuselage 4.00 $0.00    0   
652     Mar 18, 2017 Drilled the canopy frame Fuselage 6.00 $0.00    0   
651     Mar 17, 2017 Shaping the canopy frame Fuselage 2.50 $0.00    0   
650     Mar 16, 2017 Deburring the canopy frame Fuselage 2.00 $0.00    0   
649     Mar 15, 2017 Adjusted the canopy and skins for clearance Fuselage 2.00 $0.00    3   
648     Mar 14, 2017 Assembled the forward structure Fuselage 2.00 $0.00    0   
647     Mar 13, 2017 Riveting sub-structure Fuselage 1.50 $0.00    0   
646     Mar 12, 2017 Drilling hinges Fuselage 2.00 $0.00    3   
645     Mar 12, 2017 Hinge block drilling Fuselage 4.00 $0.00    3   
644     Mar 08, 2017 Hinge drilling strategy Fuselage 2.00 $0.00    2   
643     Mar 07, 2017 G3x GPS/XM antenna Avionics 2.00 $0.00    3   
642     Mar 04, 2017 Panel angles Fuselage 1.50 $0.00    2   
641     Mar 03, 2017 Panel alignment Fuselage 2.00 $0.00    3   
640     Feb 26, 2017 Re-evaluate canopy hinges Fuselage 1.00 $0.00    0   
639     Feb 25, 2017 Canopy hinge drilling Fuselage 2.00 $0.00    2   
638     Feb 19, 2017 Primed decks and frame support parts Fuselage 3.00 $0.00    2   
637     Feb 18, 2017 Decks and F-704 covers Fuselage 3.00 $0.00    1   
636     Feb 17, 2017 Primed and paint day Fuselage 5.00 $0.00    2   
635     Feb 16, 2017 Test fitted the F-789 pushrod Fuselage 1.00 $0.00    0   
634     Feb 16, 2017 Deburring and prepping parts for priming Fuselage 2.00 $0.00    0   
633     Feb 15, 2017 Adjusted the co-pilot stick Fuselage 2.00 $0.00    2   
632     Feb 14, 2017 Started the F-789 elevator pushrod Fuselage 1.00 $0.00    0   
631     Feb 13, 2017 Elevator bell crank Fuselage 1.00 $0.00    3   
630     Feb 13, 2017 Vent line screws Fuselage 1.00 $0.00    1   
629     Feb 12, 2017 Shoulder harness cable Fuselage 1.00 $0.00    3   
628     Feb 11, 2017 GMU-22 harness and static line Fuselage 1.00 $0.00    2   
627     Feb 11, 2017 Static line install and routing Fuselage 2.00 $0.00    3   
626     Feb 08, 2017 Exit brake line Fuselage 2.00 $0.00    1   
625     Feb 06, 2017 Booster pump to firewall fuel line Fuselage 1.50 $0.00    1   
624     Feb 05, 2017 Fuel line and parking brake doublers Firewall Forward 1.50 $0.00    2   
623     Feb 04, 2017 Checking rivet head clearance. Fuselage 0.50 $0.00    2   
622     Feb 04, 2017 GMU-22 connector Avionics 1.00 $0.00    2   
621     Feb 03, 2017 Garmin GPS antenna. Avionics 1.00 $0.00    3   
620     Feb 03, 2017 Drilled GPS antenna doubler Avionics 1.50 $0.00    3   
619     Feb 02, 2017 Painting canopy release rods and delrin bearings Fuselage 1.50 $0.00    2   
618     Jan 31, 2017 Riveted panel angles Fuselage 1.50 $0.00    2   
617     Jan 30, 2017 Latch and panel angles Fuselage 1.50 $0.00    3   
616     Jan 29, 2017 Cabin frame channel and more Fuselage 1.00 $0.00    3   
615     Jan 29, 2017 Center panel painting Fuselage 2.50 $0.00    3   
614     Jan 28, 2017 Fuel line support priming Fuselage 2.00 $0.00    1   
613     Jan 27, 2017 Canopy latch handle Fuselage 2.00 $0.00    0   
612     Jan 26, 2017 Forward fuselage channel replacement Fuselage 1.50 $0.00    1   
611     Jan 22, 2017 Canopy release mechanism Fuselage 2.00 $0.00    0   
610     Jan 21, 2017 Canopy hinge Fuselage 3.50 $0.00    1   
609     Jan 20, 2017 Canopy hinge Fuselage 2.00 $0.00    3   
608     Jan 19, 2017 Canopy hinge Fuselage 1.50 $0.00    3   
607     Jan 18, 2017 Sub-pane assembly Fuselage 2.00 $0.00    2   
606     Jan 17, 2017 Fuel pump support Fuselage 2.00 $0.00    2   
605     Jan 15, 2017 Canopy latch handle Fuselage 3.00 $0.00    3   
604     Jan 15, 2017 Sub-pane assembly Fuselage 3.00 $0.00    0   
603     Jan 14, 2017 Center Channel Fuselage 4.50 $0.00    1   
602     Jan 13, 2017 Center Channel Fuselage 1.00 $0.00    0   
601     Jan 12, 2017 Center Channel Fuselage 2.00 $0.00    0   
600     Jan 11, 2017 Canopy latch handle Fuselage 1.50 $0.00    1   
599     Jan 10, 2017 Canopy latch handle Fuselage 2.50 $0.00    2   
598     Jan 09, 2017 Static line routing Fuselage 2.00 $0.00    0   
597     Jan 08, 2017 Fuel line routing Fuselage 3.00 $0.00    3   
596     Jan 07, 2017 Cabin frame channel Fuselage 3.00 $0.00    2   
595     Jan 06, 2017 Cabin frame mounting Fuselage 2.00 $0.00    3   
594     Jan 06, 2017 Canopy latch weldments Fuselage 2.00 $0.00    1   
593     Jan 05, 2017 Cabin frame mounting Fuselage 2.00 $0.00    3   
592     Jan 03, 2017 Cabin frame trimming Fuselage 3.00 $0.00    2   
591     Jan 02, 2017 Cabin frame riveting Fuselage 3.00 $0.00    1   
590     Jan 01, 2017 Cabin frame riveting Fuselage 2.00 $0.00    1   
589     Dec 31, 2016 Cabin frame priming Fuselage 3.50 $0.00    3   
588     Dec 30, 2016 Rudder pedals Fuselage 1.50 $0.00    1   
587     Dec 30, 2016 Even more cabin frame Fuselage 2.00 $0.00    3   
586     Dec 29, 2016 Cabin frame Fuselage 3.50 $0.00    2   
585     Dec 28, 2016 Cabin frame Fuselage 1.50 $0.00    3   
584     Dec 28, 2016 Rudder pedal weldments Fuselage 3.00 $0.00    2   
583     Dec 27, 2016 Work bench renewal Shop Supplies 1.00 $0.00    2   
582     Dec 27, 2016 Work bench renewal Workshop 1.00 $0.00    2   
581     Dec 27, 2016 Cabin frame Fuselage 2.00 $0.00    3   
580     Dec 26, 2016 Cabin frame Fuselage 1.50 $0.00    0   
579     Dec 25, 2016 Forward fuselage ribs Fuselage 1.50 $0.00    0   
578     Dec 21, 2016 Brake fluid reservoir Firewall Forward 0.50 $0.00    0   
577     Dec 20, 2016 Rudder pedals Fuselage 1.00 $0.00    1   
576     Dec 19, 2016 Rudder pedal Fuselage 1.00 $0.00    0   
575     Dec 18, 2016 Rudder pedal Fuselage 2.00 $0.00    0   
574     Dec 17, 2016 Fuel lines Fuselage 0.00 $0.00    3   
573     Dec 17, 2016 Firewall Fuselage 2.00 $0.00    3   
572     Dec 15, 2016 Rudder pedal Fuselage 1.00 $0.00    2   
571     Dec 14, 2016 Andair replacement parts Fuselage 0.00 $0.00    1   
570     Dec 14, 2016 Disassembled the rudder/brake pedals assembly, Fuselage 0.50 $0.00    2   
569     Dec 13, 2016 Sub-panel Fuselage 2.00 $0.00    3   
568     Dec 12, 2016 Fuel lines Fuselage 1.50 $0.00    3   
567     Dec 11, 2016 EAA electric workshop Training 8.00 $0.00    1   
566     Dec 10, 2016 EAA electric workshop Training 8.00 $0.00    1   
565     Dec 09, 2016 Cabin cover plates Fuselage 2.50 $0.00    2   
564     Dec 08, 2016 Cabin cover plates Fuselage 1.00 $0.00    2   
563     Dec 05, 2016 Finish kit is here Fuselage 2.00 $0.00    2   
562     Dec 03, 2016 Fuel selector valve plate Fuselage 2.00 $0.00    3   
561     Nov 27, 2016 Sub-panel Fuselage 2.50 $0.00    3   
560     Nov 23, 2016 Cabin center cover Fuselage 1.00 $0.00    0   
559     Nov 21, 2016 Cabin center cover Fuselage 1.50 $0.00    3   
558     Nov 20, 2016 Cabin center cover Fuselage 1.50 $0.00    0   
557     Nov 19, 2016 S-tube for fuel selector Fuselage 2.00 $0.00    3   
556     Nov 17, 2016 Fuel pump fitting Fuselage 1.00 $0.00    1   
555     Nov 16, 2016 Fuel pump with cosmetic damage. Fuselage 0.50 $0.00    2   
554     Nov 12, 2016 Fuselage cradle Fuselage 1.00 $0.00    0   
553     Nov 09, 2016 Fuselage cradle Fuselage 1.50 $0.00    0   
552     Nov 07, 2016 F-709 bulkhead Fuselage 1.50 $0.00    2   
551     Nov 05, 2016 Fuselage cradle Fuselage 2.00 $0.00    2   
550     Nov 03, 2016 Riveted the left baggage floor. Cabin looks done Fuselage 1.00 $0.00    3   
549     Nov 01, 2016 Storage space template Fuselage 0.50 $0.00    1   
548     Oct 31, 2016 Avionics Switches Avionics 0.00 $0.00    2   
547     Oct 31, 2016 Experimental decal and GMU-22 bracket Avionics 1.00 $0.00    3   
546     Oct 30, 2016 AHRS (or ELT) bracket fitted Avionics 1.50 $0.00    2   
545     Oct 29, 2016 AHRS (or ELT) bracket priming Avionics 2.00 $0.00    0   
544     Oct 28, 2016 AHRS (or ELT) bracket Fuselage 1.50 $0.00    1   
543     Oct 26, 2016 Cabin nearly done Fuselage 0.50 $0.00    1   
542     Oct 23, 2016 Right floor riveting Fuselage 1.50 $0.00    3   
541     Oct 22, 2016 Finished seat hinges Fuselage 1.50 $0.00    2   
540     Oct 21, 2016 Riveted wear blocks Fuselage 1.00 $0.00    2   
539     Oct 20, 2016 Prosealed conduits Fuselage 2.50 $0.00    3   
538     Oct 18, 2016 Break lines Fuselage 0.00 $0.00    1   
537     Oct 18, 2016 Riveting cabin components Fuselage 1.00 $0.00    3   
536     Oct 18, 2016 Finished the storage space Fuselage 1.50 $0.00    1   
535     Oct 16, 2016 Conduits Fuselage 2.00 $0.00    2   
534     Oct 09, 2016 Heat valve Fuselage 1.00 $0.00    1   
533     Oct 09, 2016 Deburring and priming Fuselage 6.00 $0.00    3   
532     Oct 08, 2016 Tunnel cover Fuselage 3.00 $0.00    2   
531     Oct 07, 2016 Seat hinge pins Fuselage 0.50 $0.00    1   
530     Oct 06, 2016 Baggage floor and center channel Fuselage 1.50 $0.00    0   
529     Oct 05, 2016 Conduits anchors Fuselage 1.50 $0.00    2   
528     Oct 04, 2016 Brake fluid reservoir Fuselage 1.50 $0.00    3   
527     Oct 04, 2016 Brake lines Fuselage 2.00 $0.00    3   
526     Oct 03, 2016 Firewall components Firewall Forward 2.00 $0.00    3   
525     Oct 02, 2016 Stick boot rings Fuselage 1.00 $0.00    1   
524     Oct 02, 2016 Firewall components Firewall Forward 1.50 $0.00    3   
523     Oct 01, 2016 Flap actuator components Fuselage 2.50 $0.00    1   
522     Sep 30, 2016 Firewall components Firewall Forward 1.00 $0.00    3   
521     Sep 28, 2016 Storage space hinge Fuselage 1.00 $0.00    1   
520     Sep 27, 2016 New wear blocks Fuselage 2.00 $0.00    3   
519     Sep 26, 2016 Storage space lid Fuselage 1.50 $0.00    3   
518     Sep 25, 2016 Vent lines Fuselage 3.50 $0.00    2   
517     Sep 24, 2016 Flap actuator components Fuselage 1.50 $0.00    1   
516     Sep 21, 2016 Seat hinges Fuselage 2.00 $0.00    3   
515     Sep 20, 2016 Additional conduits Fuselage 2.00 $0.00    1   
514     Sep 19, 2016 Harness wear blocks Fuselage 3.00 $0.00    1   
513     Sep 19, 2016 Under floor storage Fuselage 3.00 $0.00    1   
512     Sep 18, 2016 Elevator bell cranks and baggage bulkhead Fuselage 3.00 $0.00    3   
511     Sep 17, 2016 Forward decks Fuselage 3.00 $0.00    1   
510     Sep 16, 2016 Replacing fuselage rivets Fuselage 2.00 $0.00    0   
509     Sep 14, 2016 Seats Fuselage 2.00 $0.00    0   
508     Sep 13, 2016 Static ports Fuselage 0.50 $0.00    1   
507     Sep 13, 2016 Fuselage gussets Fuselage 2.00 $0.00    2   
506     Sep 12, 2016 Seat distance plates Fuselage 1.50 $0.00    1   
505     Sep 11, 2016 ELT antenna doubler Avionics 1.00 $0.00    3   
504     Sep 11, 2016 Static ports Fuselage 1.00 $0.00    3   
503     Sep 11, 2016 Aft fuselage top skin Fuselage 3.00 $0.00    0   
502     Sep 09, 2016 Aft fuselage skin Fuselage 3.00 $0.00    0   
501     Sep 08, 2016 Aft fuselage skin Fuselage 3.00 $0.00    2   
500     Sep 07, 2016 Aft fuselage skin Fuselage 2.00 $0.00    1   
499     Sep 06, 2016 Canopy sub structure Fuselage 2.00 $0.00    2   
498     Sep 05, 2016 Fuselage gussets Fuselage 1.50 $0.00    2   
497     Sep 05, 2016 Riveted the aft deck. Fuselage 3.00 $0.00    2   
496     Sep 04, 2016 F-695 drilling Fuselage 2.50 $0.00    3   
495     Sep 03, 2016 Making spacers and drilled the aft deck. Fuselage 3.50 $0.00    3   
494     Sep 02, 2016 Checking twist Fuselage 2.00 $0.00    3   
493     Sep 02, 2016 Flipping the canoe ! Fuselage 2.00 $0.00    1   
492     Aug 30, 2016 Rotisserie assembled Fuselage 1.50 $0.00    1   
491     Aug 28, 2016 Last of the fuselage riveting Fuselage 2.50 $0.00    3   
490     Aug 27, 2016 Prepping for rotisserie Fuselage 0.50 $0.00    1   
489     Aug 27, 2016 Forward fuselage done Fuselage 2.00 $0.00    2   
488     Aug 24, 2016 Prepping for rotisserie Fuselage 1.50 $0.00    1   
487     Aug 24, 2016 Prepping for static ports Fuselage 1.50 $0.00    2   
486     Aug 22, 2016 Testing dimensions Fuselage 0.00 $0.00    1   
485     Aug 22, 2016 Main squeeze repair Fuselage 0.50 $0.00    1   
484     Aug 22, 2016 Armrest riveting Fuselage 2.00 $0.00    1   
483     Aug 21, 2016 Finishing center section bottom skin Fuselage 3.00 $0.00    1   
482     Aug 19, 2016 Finishing up forward fuselage Fuselage 2.00 $0.00    2   
481     Aug 16, 2016 Holes pitot, AOA lines Fuselage 0.00 $0.00    1   
480     Aug 16, 2016 outboard seat ribs riveting Fuselage 2.50 $0.00    1   
479     Aug 15, 2016 Looking at parts Fuselage 0.00 $0.00    1   
478     Aug 15, 2016 Armrest stiffeners riveting Fuselage 1.00 $0.00    3   
477     Aug 14, 2016 Armrest painting Fuselage 2.00 $0.00    0   
476     Aug 13, 2016 Armrest stiffeners Fuselage 2.00 $0.00    2   
475     Aug 12, 2016 Armrest stiffeners Fuselage 2.00 $0.00    0   
474     Aug 11, 2016 F-711 replacement Fuselage 1.50 $0.00    1   
473     Aug 10, 2016 Sealing Firewall Fuselage 2.50 $0.00    3   
472     Aug 09, 2016 Lower longeron bolts Fuselage 2.00 $0.00    1   
471     Aug 08, 2016 Fuselage beatification Fuselage 2.00 $0.00    0   
470     Aug 07, 2016 Firewall sealant Fuselage 3.00 $0.00    1   
469     Aug 06, 2016 Fuselage riveting Fuselage 4.00 $0.00    3   
468     Aug 05, 2016 Fuselage riveting Fuselage 3.50 $0.00    2   
467     Aug 04, 2016 Started fuselage riveting Fuselage 1.50 $0.00    0   
466     Aug 03, 2016 Fuselage assembly Fuselage 2.00 $0.00    0   
465     Aug 02, 2016 Countersink for double flush Fuselage 0.50 $0.00    3   
464     Aug 02, 2016 Fuselage assembly Fuselage 3.50 $0.00    1   
463     Jul 30, 2016 Forward fuselage riveting Fuselage 3.50 $0.00    3   
462     Jul 29, 2016 Testing fit and NACA vent Fuselage 2.00 $0.00    2   
461     Jul 24, 2016 Taking a break Fuselage 0.00 $0.00    0   
460     Jul 23, 2016 Side skin dimpling and FW painting. Fuselage 2.50 $0.00    3   
459     Jul 22, 2016 Bottom and side skin prepping Fuselage 3.50 $0.00    1   
458     Jul 21, 2016 F-705 riveting Fuselage 1.50 $0.00    1   
457     Jul 19, 2016 Center section Fuselage 2.50 $0.00    1   
456     Jul 18, 2016 Mounting outboard ribs Fuselage 3.50 $0.00    2   
455     Jul 17, 2016 Longeron priming and painting Fuselage 4.50 $0.00    3   
454     Jul 15, 2016 F-710B angle tweak Fuselage 1.00 $0.00    2   
453     Jul 15, 2016 Antenna doubles Avionics 2.00 $0.00    0   
452     Jul 14, 2016 Interior paint Fuselage 2.00 $0.00    2   
451     Jul 13, 2016 Antenna doubles Avionics 1.00 $0.00    1   
450     Jul 13, 2016 Vent line Fuselage 1.00 $0.00    1   
449     Jul 12, 2016 Interior paint Fuselage 3.00 $0.00    0   
448     Jul 11, 2016 Side skin masking Fuselage 2.00 $0.00    3   
447     Jul 10, 2016 Priming fuselage components Fuselage 4.00 $0.00    3   
446     Jul 08, 2016 Priming fuselage components Fuselage 2.50 $0.00    0   
445     Jul 04, 2016 Fuselage disassembly Avionics 3.50 $0.00    1   
444     Jul 03, 2016 Front fuselage Fuselage 2.50 $0.00    0   
443     Jul 02, 2016 Front fuselage Fuselage 1.00 $0.00    0   
442     Jun 30, 2016 Front fuselage Fuselage 1.00 $0.00    0   
441     Jun 29, 2016 Corner ribs Fuselage 2.00 $0.00    0   
440     Jun 28, 2016 Brake cylinders Fuselage 1.00 $0.00    0   
439     Jun 27, 2016 Rudder pedal support Fuselage 1.00 $0.00    3   
438     Jun 26, 2016 Brake cylinders Fuselage 2.50 $0.00    3   
437     Jun 25, 2016 Inside job Fuselage 0.50 $0.00    1   
436     Jun 25, 2016 Rudder pedals Fuselage 2.00 $0.00    2   
435     Jun 24, 2016 Drilled replacement ribs Fuselage 2.50 $0.00    3   
434     Jun 19, 2016 Undressing fuselage Fuselage 3.00 $0.00    1   
433     Jun 17, 2016 Corner rib needs replacement Fuselage 2.00 $0.00    3   
432     Jun 14, 2016 Corner rib tweaking Fuselage 2.50 $0.00    3   
431     Jun 13, 2016 Bottom skin fitting Fuselage 2.00 $0.00    3   
430     Jun 10, 2016 F-717 lower longeron drilling Fuselage 3.00 $0.00    2   
429     Jun 09, 2016 F-684 gusset Fuselage 1.00 $0.00    2   
428     Jun 07, 2016 F-684 gusset Fuselage 2.50 $0.00    3   
427     Jun 04, 2016 F-902 Bulkhead Fuselage 2.50 $0.00    2   
426     Jun 01, 2016 F-717 lower longeron fitting Fuselage 1.50 $0.00    3   
425     May 30, 2016 F-719 stiffener Fuselage 2.00 $0.00    1   
424     May 28, 2016 F-904 attach strips Fuselage 0.50 $0.00    1   
423     May 28, 2016 Firewall Fuselage 2.00 $0.00    1   
422     May 26, 2016 Firewall Fuselage 2.00 $0.00    2   
421     May 24, 2016 Longeron drilling front Fuselage 3.00 $0.00    1   
420     May 23, 2016 Longeron clearance Fuselage 2.00 $0.00    1   
419     May 22, 2016 Continued longeron drilling Fuselage 2.00 $0.00    2   
418     May 21, 2016 Started longeron drilling Fuselage 2.00 $0.00    1   
417     May 20, 2016 Conical bend Fuselage 2.00 $0.00    3   
416     May 15, 2016 Longeron fine adjustment Fuselage 3.50 $0.00    3   
415     May 14, 2016 Twisting longeron Fuselage 1.50 $0.00    1   
414     May 14, 2016 Forward decks Fuselage 3.50 $0.00    2   
413     May 13, 2016 Longeron bending Fuselage 2.00 $0.00    0   
412     May 10, 2016 Cabin floor Fuselage 2.00 $0.00    2   
411     May 08, 2016 Center section riveting Fuselage 3.50 $0.00    2   
410     May 07, 2016 Center section riveting Fuselage 3.50 $0.00    1   
409     May 06, 2016 Center section clecoing Fuselage 2.00 $0.00    1   
408     May 05, 2016 Antenna doubles grounding Avionics 0.50 $0.00    3   
407     May 05, 2016 Seat belt anchors painting Fuselage 2.00 $0.00    1   
406     May 01, 2016 Jetflex WR Shop Supplies 0.50 $0.00    1   
405     May 01, 2016 Jetflex WR Workshop 0.50 $0.00    1   
404     May 01, 2016 Antenna doubles Avionics 1.50 $0.00    3   
403     Apr 30, 2016 Antenna doubles fitting Avionics 1.00 $0.00    1   
402     Apr 30, 2016 Antenna doubles grounding Avionics 2.50 $0.00    1   
401     Apr 29, 2016 Antenna doubles forming Avionics 1.50 $0.00    1   
400     Apr 24, 2016 Center section riveting Fuselage 3.50 $0.00    1   
399     Apr 23, 2016 Tail cone storage Fuselage 0.50 $0.00    1   
398     Apr 23, 2016 Fuselage riveting Fuselage 2.50 $0.00    1   
397     Apr 04, 2016 Fuselage riveting Fuselage 5.50 $0.00    3   
396     Apr 03, 2016 Crotch strap brackets nutplates Fuselage 1.00 $0.00    3   
395     Apr 02, 2016 Fuselage twist check Fuselage 2.50 $0.00    1   
394     Mar 30, 2016 Tail skin riveting Fuselage 2.50 $0.00    2   
393     Mar 28, 2016 5 point harness Fuselage 0.50 $0.00    1   
392     Mar 28, 2016 Rudder cable fairing nutplates Fuselage 1.50 $0.00    1   
391     Mar 28, 2016 Aft bulkhead fitting Fuselage 2.00 $0.00    1   
390     Mar 26, 2016 Misc. parts priming Fuselage 4.00 $0.00    3   
389     Mar 25, 2016 Rudder cable fairing alignment Fuselage 2.00 $0.00    2   
388     Mar 25, 2016 Seat rib priming Fuselage 4.00 $0.00    1   
387     Mar 22, 2016 Rudder cable fairing Fuselage 1.50 $0.00    1   
386     Mar 20, 2016 Electric Trim Fuselage 0.50 $0.00    3   
385     Mar 19, 2016 Seat belt brackets Fuselage 3.00 $0.00    3   
384     Mar 18, 2016 Tail spring bracket Fuselage 0.50 $0.00    1   
383     Mar 18, 2016 Corner ribs straps Fuselage 2.00 $0.00    3   
382     Mar 16, 2016 outboard seat rib fluting Fuselage 1.00 $0.00    1   
381     Mar 16, 2016 Corner ribs Fuselage 1.50 $0.00    3   
380     Mar 15, 2016 Center section assembly Fuselage 2.50 $0.00    2   
379     Mar 14, 2016 Center section assembly Fuselage 1.00 $0.00    2   
378     Mar 13, 2016 Seat rib tie-in spacers Fuselage 1.00 $0.00    1   
377     Mar 13, 2016 Static port drilling Fuselage 1.00 $0.00    2   
376     Mar 13, 2016 F-706 riveting Fuselage 2.50 $0.00    2   
375     Mar 12, 2016 Aft fuselage skin dimpled Fuselage 2.50 $0.00    2   
374     Mar 07, 2016 Started seat ribs Fuselage 1.50 $0.00    3   
373     Mar 07, 2016 New F-916C spacers Fuselage 2.00 $0.00    2   
372     Mar 05, 2016 Aft skin priming Fuselage 4.50 $0.00    1   
371     Mar 04, 2016 Tailwheel spring adjustment Fuselage 1.50 $0.00    1   
370     Mar 04, 2016 Checking twist Fuselage 2.00 $0.00    1   
369     Mar 04, 2016 Tailwheel weldment wedge Fuselage 2.00 $0.00    2   
368     Mar 03, 2016 Aft fuselage deburring Fuselage 2.00 $0.00    3   
367     Feb 29, 2016 Aft fuselage drilling Fuselage 2.00 $0.00    3   
366     Feb 28, 2016 Aft fuselage drilling Fuselage 4.50 $0.00    3   
365     Feb 27, 2016 Aft bottom skin done ? Fuselage 0.50 $0.00    1   
364     Feb 27, 2016 F-706 part II Fuselage 2.00 $0.00    2   
363     Feb 27, 2016 J-channel fitting Fuselage 2.00 $0.00    2   
362     Feb 26, 2016 Tail skin adjustments Fuselage 1.50 $0.00    2   
361     Feb 25, 2016 F-711 part II Fuselage 3.50 $0.00    2   
360     Feb 23, 2016 Static line routing Fuselage 1.50 $0.00    2   
359     Feb 22, 2016 J-channels Fuselage 1.50 $0.00    2   
358     Feb 21, 2016 Aft fuselage assembly Fuselage 3.00 $0.00    2   
357     Feb 21, 2016 F-705 deburring and priming Fuselage 4.00 $0.00    3   
356     Feb 20, 2016 Mark cut out got tail spring Fuselage 1.00 $0.00    1   
355     Feb 20, 2016 Flap actuator bearings Fuselage 2.00 $0.00    3   
354     Feb 19, 2016 Destruction of parts Fuselage 1.00 $0.00    3   
353     Feb 19, 2016 Spar assembly Fuselage 1.00 $0.00    2   
352     Feb 19, 2016 Tail bottom skin trimming Fuselage 1.00 $0.00    2   
351     Feb 19, 2016 Bulk heads to bottom skin Fuselage 1.50 $0.00    1   
350     Feb 19, 2016 Center section assembly Fuselage 1.50 $0.00    0   
349     Feb 19, 2016 Fitting the tail bottom skin Fuselage 2.00 $0.00    2   
348     Feb 18, 2016 Seat back angles Fuselage 1.50 $0.00    1   
347     Feb 14, 2016 F-705 drilling Fuselage 2.00 $0.00    3   
346     Feb 14, 2016 Seat back angles Fuselage 2.00 $0.00    3   
345     Feb 13, 2016 Seat belt anchors Fuselage 1.00 $0.00    3   
344     Feb 13, 2016 Center section brackets Fuselage 3.00 $0.00    3   
343     Feb 12, 2016 Continued work on the F-705. Fuselage 2.00 $0.00    3   
342     Feb 11, 2016 Bulkheads done, nearly Fuselage 0.50 $0.00    1   
341     Feb 11, 2016 F-705 Part II Fuselage 2.00 $0.00    3   
340     Feb 11, 2016 F-706 Assembly Fuselage 2.00 $0.00    2   
339     Feb 10, 2016 Riveted Bulkheads angles Fuselage 2.00 $0.00    3   
338     Feb 09, 2016 Started Bulkheads angles Fuselage 2.00 $0.00    2   
337     Feb 08, 2016 Center Section brackets and elevator bell crank Fuselage 2.00 $0.00    2   
336     Feb 07, 2016 F-705 Bulkhead, the F-730 plate Fuselage 1.00 $0.00    1   
335     Feb 07, 2016 Prepped bulkhead for priming Fuselage 1.00 $0.00    0   
334     Feb 07, 2016 Primed the bulkheads Fuselage 4.00 $0.00    3   
333     Feb 06, 2016 Assembled elevator bell crank (F-635). Fuselage 2.00 $0.00    2   
332     Feb 06, 2016 Longeron bending Fuselage 2.00 $0.00    1   
331     Feb 05, 2016 Elevator Servo Bracket Fuselage 2.00 $0.00    2   
330     Feb 02, 2016 Bulkhead slots for longerons Fuselage 2.00 $0.00    1   
329     Feb 01, 2016 Started F-710 Bulkhead Fuselage 0.50 $0.00    1   
328     Feb 01, 2016 F-705 Drilling failure Fuselage 1.00 $0.00    1   
327     Feb 01, 2016 Started F-711 Bulkhead Fuselage 1.00 $0.00    1   
326     Jan 31, 2016 Assembled F-706 Bulkhead Fuselage 1.50 $0.00    2   
325     Jan 31, 2016 Started the F-706 bulkhead Fuselage 6.00 $0.00    0   
324     Jan 30, 2016 Started the bulkheads Fuselage 5.50 $0.00    1   
323     Jan 26, 2016 Riveted Firewall Fuselage 3.00 $0.00    3   
322     Jan 23, 2016 Started riveting the center section Fuselage 4.00 $0.00    2   
321     Jan 22, 2016 Test fitted the control column Fuselage 2.00 $0.00    1   
320     Jan 20, 2016 Trimmed the control column mounts Fuselage 2.00 $0.00    1   
319     Jan 19, 2016 Drilled the control column mounts Fuselage 3.00 $0.00    3   
318     Jan 18, 2016 Made holes for cables in center section Fuselage 2.00 $0.00    3   
317     Jan 17, 2016 Deburring of F-704 bulkhead parts Fuselage 2.00 $0.00    0   
316     Jan 17, 2016 Priming of the firewall aluminum stiffeners Fuselage 3.00 $0.00    0   
315     Jan 16, 2016 Deburred firewall aluminum angles Fuselage 2.00 $0.00    0   
314     Jan 13, 2016 Got remaining fuselage parts Fuselage 0.50 $0.00    1   
313     Jan 10, 2016 Countersunk firewall parts Fuselage 4.00 $0.00    1   
312     Jan 09, 2016 Brake line FW pass through stiffener Fuselage 2.00 $0.00    3   
311     Jan 09, 2016 Drilled firewall parts Fuselage 4.00 $0.00    2   
310     Jan 08, 2016 Started firewall Fuselage 5.00 $0.00    3   
309     Jan 07, 2016 Flap hinge pin fastening nutplate Wings 1.00 $0.00    0   
308     Jan 06, 2016 Fuselage inventory continues Fuselage 4.00 $0.00    0   
307     Jan 05, 2016 Fuselage inventory Fuselage 3.00 $0.00    1   
306     Jan 04, 2016 Fuselage Kit Arrives Fuselage 1.00 $0.00    2   
305     Dec 31, 2015 Aileron bracket adjustment Wings 2.00 $0.00    3   
304     Dec 31, 2015 Riveted right aileron brackets Wings 3.00 $0.00    3   
303     Dec 27, 2015 Aileron brace for right wing Wings 2.00 $0.00    2   
302     Dec 25, 2015 Flap brace for left wing Wings 1.00 $0.00    3   
301     Dec 13, 2015 Riveted Right top skin Wings 4.00 $0.00    1   
300     Dec 05, 2015 Wing Stand Support Wings 2.00 $0.00    2   
299     Nov 29, 2015 inboard upper skin riveted Wings 4.00 $0.00    0   
298     Jul 20, 2015 Baffle inspection Wings 1.00 $0.00    3   
297     Jul 19, 2015 Fuel tank baffle Wings 3.00 $0.00    2   
296     Jul 05, 2015 Proseal fuel tank components Wings 4.00 $0.00    3   
295     Jun 23, 2015 Riveted fuel tank Wings 4.00 $0.00    1   
294     Jun 20, 2015 Fuel tank ribs Wings 3.00 $0.00    3   
293     Jun 17, 2015 Leading edge lights Wings 2.00 $0.00    3   
292     Jun 14, 2015 Riveting Fuel Tank Root Rib Wings 3.00 $0.00    3   
291     Jun 10, 2015 Last Night Work Revisited Wings 2.00 $0.00    3   
290     Jun 09, 2015 Fuel cap Wings 3.00 $0.00    0   
289     Jun 07, 2015 Fuel tank inspection Wings 1.00 $0.00    0   
288     Jun 06, 2015 Introducing Proseal Wings 3.00 $0.00    0   
287     Jun 05, 2015 Right Fuel Tank Root Rib Wings 2.00 $0.00    1   
286     Jun 03, 2015 Leading edge Wings 3.00 $0.00    0   
285     Jun 02, 2015 Riveting leading edge Wings 2.00 $0.00    0   
284     Jun 01, 2015 Leading Edge Riveting Wings 3.00 $0.00    0   
283     May 31, 2015 Landing light Wings 6.00 $0.00    3   
282     May 30, 2015 Riveted Right leading edge Wings 6.50 $0.00    3   
281     May 29, 2015 Leading Edge dimpling Wings 3.50 $0.00    3   
280     May 28, 2015 Tank skin countersinks and vent line Wings 2.50 $0.00    3   
279     May 27, 2015 Dimpling the Right fuel tank Wings 3.00 $0.00    2   
278     May 26, 2015 Finish prepping the LE and FT Wings 2.50 $0.00    0   
277     May 25, 2015 Fuel Tank deburring Wings 1.00 $0.00    0   
276     May 25, 2015 Leading Edge Wings 6.00 $0.00    3   
275     May 24, 2015 Fuel Tank Wings 6.00 $0.00    3   
274     May 23, 2015 Fuel tank deburring Wings 2.00 $0.00    3   
273     May 23, 2015 Z-brackets and fuel tank baffle Wings 2.00 $0.00    2   
272     May 23, 2015 Fuel Tank Wings 6.00 $0.00    3   
271     May 22, 2015 Z-brackets Wings 6.00 $0.00    3   
270     May 16, 2015 Fuel drain Wings 0.50 $0.00    3   
269     May 16, 2015 Fuel pick up and brackets Wings 3.00 $0.00    3   
268     May 15, 2015 R Fuel Tank Wings 5.00 $0.00    0   
267     May 14, 2015 Leading edge Wings 3.00 $0.00    3   
266     May 13, 2015 Re-hung the Right wing Wings 1.00 $0.00    0   
265     May 10, 2015 Leading edge ribs adjustment Wings 2.00 $0.00    2   
264     May 10, 2015 Main spar countersinking Wings 3.00 $0.00    2   
263     May 09, 2015 Drilled RW bottom skin Wings 4.00 $0.00    0   
262     May 08, 2015 Drilled RW Top skin Wings 2.00 $0.00    3   
261     May 07, 2015 Tank joint plate Wings 1.50 $0.00    0   
260     May 06, 2015 Leading Edge fitting Wings 1.50 $0.00    1   
259     May 05, 2015 Hung the Right wing Wings 2.00 $0.00    3   
258     May 04, 2015 Finished Right main rib riveting Wings 1.50 $0.00    2   
257     May 03, 2015 Riveting Right main ribs Wings 1.50 $0.00    2   
256     May 02, 2015 LE Ribs and Right Main spar retouching Wings 3.00 $0.00    2   
255     May 01, 2015 R Wing Rib priming Wings 6.00 $0.00    2   
254     Apr 30, 2015 Prepping for priming Wings 0.50 $0.00    0   
253     Apr 29, 2015 Drilled main ribs to spars Wings 2.00 $0.00    0   
252     Apr 28, 2015 Adjusted main ribs Wings 1.00 $0.00    2   
251     Apr 19, 2015 New shop lights Shop Supplies 0.00 $0.00    0   
250     Apr 19, 2015 New shop lights Workshop 0.00 $0.00    0   
249     Apr 15, 2015 Drilled holes for the right wing conduit Wings 1.00 $0.00    0   
248     Apr 14, 2015 Wing main ribs and leading edge Wings 2.50 $0.00    1   
247     Apr 13, 2015 Main rib deburring Wings 2.00 $0.00    0   
246     Apr 12, 2015 Main rib deburring Wings 1.50 $0.00    0   
245     Apr 11, 2015 Main rib deburring Wings 1.50 $0.00    0   
244     Apr 10, 2015 Leading edge rib deburring Wings 0.50 $0.00    0   
243     Apr 09, 2015 Right wing ribs deburring Wings 1.00 $0.00    0   
242     Apr 08, 2015 Right wing ribs deburring Wings 0.50 $0.00    0   
241     Apr 06, 2015 Right wing ribs deburring Wings 0.50 $0.00    0   
240     Apr 05, 2015 Right wing ribs deburring Wings 1.20 $0.00    0   
239     Apr 04, 2015 Right wing ribs deburring Wings 1.00 $0.00    0   
238     Apr 03, 2015 Right wing ribs deburring Wings 1.00 $0.00    0   
237     Feb 07, 2015 Moving project Miscellaneous 3.00 $0.00    0   
236     Dec 30, 2014 Got the garage floor coated Shop Supplies 0.00 $0.00    3   
235     Dec 30, 2014 Got the garage floor coated Workshop 0.00 $0.00    3   
234     Dec 30, 2014 New workshop None 0.00 $0.00    0   
233     Dec 17, 2014 Primed the pitot mast and mounting hardware Wings 1.50 $0.00    0   
232     Nov 23, 2014 Wing stand modification Wings 2.00 $0.00    2   
231     Nov 20, 2014 Securing pitot tubes to bell crank Wings 1.00 $0.00    1   
230     Nov 19, 2014 Pitot pluming Wings 2.00 $0.00    2   
229     Nov 06, 2014 Pitot tube forming clamps Wings 3.00 $0.00    3   
228     Nov 01, 2014 Pitot plumbing Wings 3.00 $0.00    3   
227     Oct 22, 2014 Finished flap locking mechanism Wings 2.00 $0.00    3   
226     Oct 21, 2014 Started constructing locking mechanism for flap hi Wings 2.00 $0.00    2   
225     Oct 17, 2014 Primed pitot mast hardware and mounted control box Wings 2.00 $0.00    3   
224     Oct 16, 2014 Riveted control box nutplates to the wing rib Wings 1.50 $0.00    2   
223     Oct 14, 2014 Made and mounted aileron stop out of delrin Wings 1.00 $0.00    1   
222     Oct 12, 2014 Pitot tubes and control box Wings 1.00 $0.00    3   
221     Oct 04, 2014 Pulling Engine Practice 0.00 $0.00    0   
220     Oct 02, 2014 Match drilled the flap to the wing Wings 2.50 $0.00    3   
219     Sep 29, 2014 Left bell crank. Wings 1.00 $0.00    3   
218     Sep 20, 2014 Riveted the left flap Wings 2.00 $0.00    2   
217     Sep 17, 2014 Assembled the left flap Wings 1.00 $0.00    2   
216     Sep 17, 2014 Assembled the right aileron Wings 2.00 $0.00    3   
215     Sep 14, 2014 Primed the right aileron parts Wings 4.00 $0.00    2   
214     Sep 12, 2014 Match drilled the right aileron Wings 1.50 $0.00    2   
213     Sep 09, 2014 Spacer for the leading edge/tank interface Wings 1.50 $0.00    3   
212     Sep 08, 2014 Fuel tank fitting Wings 1.50 $0.00    0   
211     Sep 06, 2014 Finished the right aileron Wings 2.00 $0.00    3   
210     Sep 04, 2014 Final assembly of right aileron. Wings 1.50 $0.00    1   
209     Aug 30, 2014 Match drilling the left aileron skin and ribs Wings 2.50 $0.00    2   
208     Aug 24, 2014 Starting match drilling the left aileron spar Wings 2.00 $0.00    2   
207     Aug 22, 2014 Finishing reverting the flap Wings 2.50 $0.00    2   
206     Aug 21, 2014 Flap riveting Wings 2.00 $0.00    2   
205     Aug 20, 2014 Adjusted the flap skin Wings 0.50 $0.00    2   
204     Aug 20, 2014 Riveted aileron stiffeners Wings 1.00 $0.00    1   
203     Aug 19, 2014 Aileron dimpling Wings 3.50 $0.00    0   
202     Aug 18, 2014 Aileron stiffeners Wings 2.00 $0.00    0   
201     Aug 17, 2014 Right flap drilling Wings 2.50 $0.00    0   
200     Aug 16, 2014 Primed the aileron components Wings 5.50 $0.00    3   
199     Aug 15, 2014 Match drilled the right aileron stiffeners Wings 1.50 $0.00    0   
198     Aug 14, 2014 Removed vinyl on ailerons Wings 1.00 $0.00    2   
197     Aug 12, 2014 Aileron and Flap cradle Wings 2.00 $0.00    1   
196     Aug 10, 2014 Started deburring the right aileron components. Wings 3.50 $0.00    1   
195     Aug 09, 2014 Drilled the stiffeners to the aileron skin. Wings 2.00 $0.00    3   
194     Aug 08, 2014 Countersunk the left flap nutplate Wings 1.50 $0.00    0   
193     Aug 07, 2014 Deburred the left aileron stiffeners Wings 2.00 $0.00    0   
192     Aug 06, 2014 Cut the aileron stiffeners (left/right) Wings 2.00 $0.00    2   
191     Aug 05, 2014 Deburred and drilled the FL-706B Wings 1.50 $0.00    3   
190     Aug 05, 2014 Drilled the flap hinge Wings 2.00 $0.00    2   
189     Aug 04, 2014 Clecoed the left flap Wings 2.50 $0.00    1   
188     Aug 03, 2014 Left fuel tank pressure holding Wings 0.50 $0.00    0   
187     Aug 02, 2014 Rv-7 demo flight with Mike Miscellaneous 0.00 $0.00    0   
186     Jul 29, 2014 Pressure still holding Wings 0.50 $0.00    0   
185     Jul 25, 2014 Pressure holding for the left fuel tank Wings 0.00 $0.00    1   
184     Jul 24, 2014 Started left fuel tank leak test Wings 2.50 $0.00    0   
183     Jul 17, 2014 Mounted and sealed the inspection cover Wings 2.00 $0.00    3   
182     Jul 15, 2014 Finished up the aileron brackets. Wings 2.50 $0.00    1   
181     Jul 14, 2014 Riveted the aileron brackets Wings 3.00 $0.00    0   
180     Jul 13, 2014 Riveted the left baffle Wings 6.50 $0.00    1   
179     Jul 12, 2014 Redid the aileron brackets Wings 3.00 $0.00    0   
178     Jun 22, 2014 Installed flop tube Wings 3.00 $0.00    3   
177     Jun 17, 2014 Test fit the flop tube Wings 2.00 $0.00    2   
176     Jun 08, 2014 Flop tube safety wire Wings 1.00 $0.00    2   
175     Jun 07, 2014 Proseal inspection Wings 1.00 $0.00    1   
174     May 30, 2014 Last rib on left fuel tank Wings 2.00 $0.00    1   
173     May 11, 2014 Solo XC !!!!! Miscellaneous 0.00 $0.00    0   
172     May 11, 2014 Drilled new holes for my spacers ala Nilberg Wings 2.00 $0.00    1   
171     May 10, 2014 Capacity plate spacers Wings 8.00 $0.00    3   
170     May 09, 2014 New mini-lathe Shop Supplies 0.00 $0.00    0   
169     May 09, 2014 New mini-lathe Workshop 0.00 $0.00    0   
168     May 07, 2014 Match drilled the braces to the left wing. Wings 0.50 $0.00    0   
167     May 05, 2014 Flap and aileron deburring Wings 1.50 $0.00    0   
166     May 04, 2014 Left riveted the outboard top skin Wings 3.00 $0.00    1   
165     May 03, 2014 Left riveted the inboard top skin Wings 2.50 $0.00    1   
164     May 02, 2014 Finished riveting the leading edge, Wings 3.50 $0.00    1   
163     May 01, 2014 Left aileron brackets Wings 1.50 $0.00    0   
162     Apr 30, 2014 Leading edge rivet repair Wings 1.50 $0.00    1   
161     Apr 29, 2014 Leading edge rivet repair Wings 2.50 $0.00    0   
160     Apr 28, 2014 Rivet inspection and fixing Wings 2.00 $0.00    1   
159     Apr 27, 2014 Jigs for riveting Wings 1.50 $0.00    2   
158     Apr 26, 2014 Left landing light Wings 3.00 $0.00    3   
157     Apr 25, 2014 Made jigs for the leading edge to spar riveting. Wings 2.00 $0.00    2   
156     Apr 23, 2014 Capacitive sender plates and wiring Wings 2.00 $0.00    2   
155     Apr 22, 2014 More left fuel tank prep. Wings 1.00 $0.00    0   
154     Apr 21, 2014 Proseal Inspection Wings 1.50 $0.00    0   
153     Apr 20, 2014 Flop tube Wings 0.00 $0.00    1   
152     Apr 20, 2014 Riveted nut plates for the inspection plate Wings 2.00 $0.00    3   
151     Apr 20, 2014 Vent line and anti-hang up Wings 2.00 $0.00    3   
150     Apr 20, 2014 Primed left top skin and doubler Wings 6.00 $0.00    3   
149     Apr 19, 2014 Left fuel tank (proseal) Wings 3.50 $0.00    0   
148     Apr 18, 2014 Left fuel tank (proseal) clecoing Wings 5.50 $0.00    2   
147     Apr 17, 2014 Left fuel tank (proseal) clecoing Wings 3.50 $0.00    3   
146     Apr 08, 2014 Anti-hang up device Wings 1.50 $0.00    1   
145     Apr 07, 2014 Fuel cap clean up, anti hang-up device Wings 3.00 $0.00    2   
144     Apr 06, 2014 Left fuel tank (proseal) riveting Wings 3.00 $0.00    2   
143     Apr 05, 2014 Pivot mast opening Wings 2.50 $0.00    3   
142     Apr 01, 2014 Left rear spar to ribs riveting Wings 2.50 $0.00    0   
141     Mar 31, 2014 Anti rotation bracket Wings 2.50 $0.00    0   
140     Mar 30, 2014 Fuel tank flap doors, stall warning install Wings 5.50 $0.00    1   
139     Mar 29, 2014 Started riveting the left leading edge. Wings 3.00 $0.00    1   
138     Mar 28, 2014 Leading edge access door Wings 1.50 $0.00    3   
137     Mar 27, 2014 Left leading edge dimpling Wings 1.50 $0.00    0   
136     Mar 22, 2014 Vent line clips Wings 3.00 $0.00    2   
135     Mar 21, 2014 Leading edge skin priming Wings 4.50 $0.00    0   
134     Mar 20, 2014 Anti hang up device Wings 1.50 $0.00    0   
133     Mar 19, 2014 Flop tube fitting Wings 1.00 $0.00    2   
132     Mar 18, 2014 Drilled the left tank tip stiffener/bracket Wings 1.00 $0.00    2   
131     Mar 16, 2014 Left fuel tank dimpling Wings 3.00 $0.00    0   
130     Mar 15, 2014 Left fuel tank skin dimpling Wings 2.00 $0.00    0   
129     Mar 14, 2014 Left fuel tank inspection hole Wings 1.50 $0.00    3   
128     Mar 13, 2014 Left fuel tank stiffener and brackets Wings 2.00 $0.00    3   
127     Mar 12, 2014 Fuel cap countersinking Wings 2.00 $0.00    2   
126     Mar 11, 2014 Fuel cap Wings 1.50 $0.00    3   
125     Mar 10, 2014 Fuel tank drain Wings 2.00 $0.00    3   
124     Mar 09, 2014 Fuel tank fitting and baffle fitting Wings 6.00 $0.00    3   
123     Mar 08, 2014 Z-brackets, fuel tank deburring, stall warning Wings 3.00 $0.00    3   
122     Mar 07, 2014 Z-bracket priming Wings 3.00 $0.00    0   
121     Mar 05, 2014 Leading edge joint plate Wings 1.50 $0.00    0   
120     Mar 04, 2014 Z-brackets countersinks Wings 2.50 $0.00    1   
119     Mar 03, 2014 Z-bracket drilling Wings 2.00 $0.00    0   
118     Mar 02, 2014 Z-brackets for left wing Wings 4.00 $0.00    3   
117     Mar 01, 2014 Left leading edge drilling Wings 4.00 $0.00    0   
116     Feb 28, 2014 Rear spar clean up Wings 2.00 $0.00    0   
115     Feb 26, 2014 Match drilled the left bottom skin. Wings 2.00 $0.00    1   
114     Feb 25, 2014 Match drilled the left top skin. Wings 1.50 $0.00    0   
113     Feb 24, 2014 Stall warning assembly Wings 1.50 $0.00    0   
112     Feb 19, 2014 Wing walk doubler and skin joints Wings 2.00 $0.00    0   
111     Feb 17, 2014 Leading edge drilling Wings 2.00 $0.00    1   
110     Feb 16, 2014 Riveting Wing Ribs to Spar Wings 2.00 $0.00    2   
109     Feb 15, 2014 Left wing ribs to spar riveting Wings 3.00 $0.00    0   
108     Feb 14, 2014 Left tank rib deburring Wings 2.00 $0.00    0   
107     Feb 13, 2014 Left leading edge deburring Wings 1.00 $0.00    0   
106     Feb 12, 2014 Left leading edge Wings 2.00 $0.00    0   
105     Feb 11, 2014 Built Leading Edge Cradle. Wings 2.00 $0.00    2   
104     Feb 10, 2014 Built Leading Edge Cradle. Wings 2.00 $0.00    1   
103     Feb 09, 2014 Left wing rib priming Wings 4.00 $0.00    0   
102     Feb 08, 2014 Left wing rib prepping Wings 5.00 $0.00    0   
101     Feb 07, 2014 Wing drilling Wings 2.00 $0.00    2   
100     Feb 06, 2014 Conduit Wings 1.00 $0.00    0   
99     Feb 05, 2014 Wing Stand Wings 3.00 $0.00    0   
98     Feb 02, 2014 Deburring wing ribs Wings 4.00 $0.00    3   
97     Feb 01, 2014 Deburring wing ribs Wings 3.00 $0.00    0   
96     Jan 31, 2014 Deburring wing ribs Wings 1.50 $0.00    0   
95     Jan 30, 2014 Deburring wing ribs Wings 1.50 $0.00    0   
94     Jan 29, 2014 Deburring wing ribs Wings 1.50 $0.00    0   
93     Jan 28, 2014 Started left wing ribs deburring Wings 2.00 $0.00    1   
92     Jan 27, 2014 Rear spar riveting Wings 3.00 $0.00    3   
91     Jan 26, 2014 Tie-down priming Wings 2.00 $0.00    0   
90     Jan 25, 2014 Rear spar priming Wings 5.00 $0.00    3   
89     Jan 24, 2014 Started rear spars Wings 3.00 $0.00    3   
88     Jan 22, 2014 Wing stand hardware Wings 1.00 $0.00    0   
87     Jan 20, 2014 Wing stand hardware Wings 2.00 $0.00    3   
86     Jan 19, 2014 Wing stand hardware Wings 2.00 $0.00    3   
85     Jan 19, 2014 Drilled tie-down brackets to spar and countersunk Wings 3.00 $0.00    3   
84     Jan 18, 2014 Built the wing hanging stand framework Wings 4.00 $0.00    0   
83     Jan 16, 2014 Manufactured the tie-down spacers Wings 1.00 $0.00    2   
82     Jan 13, 2014 Nutplates on right spar Wings 2.00 $0.00    1   
81     Jan 12, 2014 Installed nutplates Wings 4.00 $0.00    3   
80     Jan 10, 2014 Constructed Rib straitening device Wings 2.00 $0.00    2   
79     Dec 29, 2013 Workshop clean-up Miscellaneous 2.00 $0.00    0   
78     Dec 26, 2013 Inventory of wing kit finished Wings 2.00 $0.00    0   
77     Dec 24, 2013 Inventory of wing kit Wings 2.00 $0.00    0   
76     Dec 22, 2013 Inventory of wing kit Wings 2.00 $0.00    0   
75     Dec 20, 2013 Wing Kit Arrived Wings 1.00 $0.00    1   
74     Dec 15, 2013 Riveted the trim tab Empennage 4.00 $0.00    3   
73     Dec 10, 2013 Primed trim tab parts Empennage 3.00 $0.00    0   
72     Dec 07, 2013 Drilled the trim tab hinge Empennage 2.00 $0.00    3   
71     Dec 07, 2013 Bent the trim tab tabs Empennage 3.00 $0.00    3   
70     Dec 05, 2013 Bent the Left Elevator Tabs Empennage 3.00 $0.00    3   
69     Dec 02, 2013 Riveted the Left Elevator skeleton Empennage 3.00 $0.00    1   
68     Dec 01, 2013 Left Elevator Skeleton priming Empennage 3.00 $0.00    2   
67     Nov 30, 2013 Back Riveting Left Elevator II Empennage 3.00 $0.00    3   
66     Nov 28, 2013 Left Elevator II Empennage 3.00 $0.00    2   
65     Nov 24, 2013 Elevator is moving Empennage 1 $0.00    0   
64     Nov 11, 2013 Left side stiffeners Empennage 2.00 $0.00    1   
63     Nov 10, 2013 Trailing edge forming Empennage 3.00 $0.00    3   
62     Nov 10, 2013 Right elevator riveting Empennage 4.00 $0.00    3   
61     Nov 09, 2013 Right elevator priming Empennage 3.00 $0.00    0   
60     Nov 08, 2013 Trim reinforcement plate Empennage 3.00 $0.00    2   
59     Nov 07, 2013 Right elevator assembly Empennage 4.00 $0.00    2   
58     Nov 06, 2013 Elevator stiffeners Empennage 3.00 $0.00    1   
57     Nov 02, 2013 Rudder trailing edge clean up Empennage 2.00 $0.00    2   
56     Nov 02, 2013 Rudder trailing edge riveting Empennage 2.00 $0.00    3   
55     Nov 02, 2013 Rudder Leading Edge Empennage 3.00 $0.00    3   
54     Nov 02, 2013 Vertical Stabilizer Spar riveting Empennage 3.00 $0.00    2   
53     Nov 01, 2013 Horizontal Stabilizer final riveting Empennage 4.00 $0.00    3   
52     Oct 31, 2013 Left Horizontal Stabilizer Empennage 6.00 $0.00    2   
51     Oct 30, 2013 Tool testing Miscellaneous 1.00 $0.00    2   
50     Oct 30, 2013 Rudder proseal Empennage 2.00 $0.00    2   
49     Oct 29, 2013 Riveted the other side of the rudder Empennage 4.00 $0.00    2   
48     Oct 28, 2013 Rudder riveting Empennage 4.00 $0.00    0   
47     Oct 27, 2013 Trailing edge prep Empennage 1.00 $0.00    1   
46     Oct 27, 2013 Rudder skin riveting Empennage 4.00 $0.00    2   
45     Oct 26, 2013 Riveted the counterbalance. Empennage 4.00 $0.00    3   
44     Oct 26, 2013 Counterbalance Empennage 6.00 $0.00    1   
43     Oct 25, 2013 Rudder Empennage 3.00 $0.00    1   
42     Oct 24, 2013 Riveting rudder skeleton Empennage 3.00 $0.00    3   
41     Oct 21, 2013 Received shipping date for wing kit Wings 0.00 $0.00    1   
40     Oct 21, 2013 Rudder skin clearance Empennage 2.00 $0.00    0   
39     Oct 20, 2013 Deburred and dimpled Rudder Empennage 8.00 $0.00    1   
38     Oct 19, 2013 Rudder riveting Empennage 5.00 $0.00    3   
37     Oct 18, 2013 Vertical Stabilizer Riveting Empennage 8.00 $0.00    3   
36     Oct 16, 2013 Horizontal Stabilizer Revering continues Empennage 4.00 $0.00    3   
35     Oct 15, 2013 Horizontal Stabilizer riveting Empennage 3.00 $0.00    3   
34     Oct 14, 2013 Preparing for Horizontal Stabilizer riveting Empennage 2.00 $0.00    3   
33     Oct 13, 2013 Rudder spar Empennage 4.00 $0.00    3   
32     Oct 12, 2013 Rudder stiffener match drilling Empennage 3.00 $0.00    2   
31     Oct 10, 2013 Vertical Stabilizer Skeleton and Rudder stiffeners Empennage 3.00 $0.00    0   
30     Oct 09, 2013 Rudder stiffeners Empennage 3.00 $0.00    0   
29     Oct 08, 2013 Ordered the wing kit Wings 0.00 $0.00    0   
28     Oct 08, 2013 Horizontal Stabilizer Rear Spar riveted Empennage 3.00 $0.00    0   
27     Oct 06, 2013 Vertical Stabilizer Spar and Skeleton riveted Empennage 8.00 $0.00    2   
26     Oct 05, 2013 Priming Empennage 4.00 $0.00    3   
25     Oct 04, 2013 Prepping for priming Empennage 8.00 $0.00    0   
24     Oct 02, 2013 Vertical Stabilizer Spar and Skin Empennage 4.00 $0.00    2   
23     Oct 01, 2013 Vertical Stabilizer deburring Empennage 3.00 $0.00    0   
22     Sep 29, 2013 Drilled VS Empennage 3.00 $0.00    3   
21     Sep 29, 2013 Stewarts Systems testing Miscellaneous 4.00 $0.00    1   
20     Sep 20, 2013 Deburring Horizontal Stabilizer Skins Empennage 3.00 $0.00    1   
19     Sep 20, 2013 Drilled Horizontal Stabilizer ribs Empennage 3.00 $0.00    3   
18     Sep 19, 2013 Marked Horizontal Stabilizer ribs for drilling Empennage 3.00 $0.00    3   
17     Sep 18, 2013 Forming Horizontal Stabilizer ribs Empennage 4.00 $0.00    3   
16     Sep 15, 2013 Bending HS-710 and HS-714 Empennage 1.00 $0.00    1   
15     Sep 15, 2013 Preparing HS-404 Ribs Empennage 2.00 $0.00    3   
14     Sep 14, 2013 Horizontal Stabilizer Rear Spar Assembly Empennage 2.00 $0.00    1   
13     Sep 14, 2013 FS Front Spar Assembly Empennage 3.00 $0.00    0   
12     Sep 12, 2013 HS-603PP Empennage 2.00 $0.00    3   
11     Aug 30, 2013 DRDT-2 Dimple Table and workbench Shop Supplies 4.00 $0.00    0   
10     Aug 30, 2013 DRDT-2 Dimple Table and workbench Workshop 4.00 $0.00    0   
9     Aug 29, 2013 Finishing Toolbox Practice 3.00 $0.00    2   
8     Aug 28, 2013 Riveting practice (Toolbox) Practice 3.00 $0.00    0   
7     Aug 25, 2013 Construction of workbench Shop Supplies 7.00 $0.00    2   
6     Aug 25, 2013 Construction of workbench Workshop 7.00 $0.00    2   
5     Aug 20, 2013 Remaining empennage arrived Empennage 2.00 $0.00    0   
4     Aug 19, 2013 Empennage Partially Received Empennage 1.00 $0.00    2   
3     Aug 18, 2013 Table for dimpler Shop Supplies 1.00 $0.00    0   
2     Aug 18, 2013 Table for dimpler Workshop 1.00 $0.00    0   
1     Aug 15, 2013 Ordered Empennage Empennage 0.00 $0.00    0   
------------ -------------- -------------
Totals2193.5    $0.00    1678   





NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.