Bolted and set neutral for left wing aileron. Prepped air gap parts and pitot mount .
Instrument Air hose colors:
• Pitot - Red
• Static - White
• AOA - Blue
I worked section 20, but didn't get much done. I did start mounting the gap fairing and discovered I'm going to need someone with a thin arm to get in and hold a bucking bar for the gap fairing rivets - very hard to reach.
The left wing has a 16 pin connector: 2 will be 14GA for the pitot heat, 10 for the wing tip, fuel and pitot heat control for a total of 14.
The right wing has a 28 pin CPC connector, with 9 for the wingtip, 5 for trim servo, 4 for the roll servo, and fuel capacity for a total of 19.