Apr 15, 2021     Fiberglass work on the empennage fairings       Category: Empennage

Continuing fiberglass work on the fairings and attaching fairings. Had to start over after the first attempt. One layer of glass wasn't strong enough to support the structure.

  Aug 11, 2020     Empennage Attachment       Category: Empennage

Pages 11-4 to 11-8
Attaching horizontal stabilizer. Attaching vertical stabilizer. Assembling pushrod. Attaching rudder.

  Aug 03, 2020     Tailcone riveting, battery mount assembly       Category: Empennage

Pages 10-23 to 10-24
Continue riveting tailcone skins

  Aug 02, 2020     Tailcone assembly Category: Empennage

Pages 10-20 to 10-22
Continue riveting skins to tailcone assembly. Attaching aft deck and stops/doublers/angles. Attaching aft top skin and riveting in place.

  Aug 01, 2020     Tailcone assembly Category: Empennage

Page 10/20
Reassemble tailcone after priming. Rivet skins to bulkheads, frames and stiffeners

  Jul 30, 2020     Tailcone bulkhead riveting Category: Empennage

Page 10-18 to 10-19
Riveting tailcone bulkheads together.

  Jul 25, 2020     Tailcone assembly Category: Empennage

Page 10-16 and 10-17
Battery channel prep. Battery/bellcrank mount prep. Elevator bell crank assembly

  Jul 23, 2020     Tailcone assembly Category: Empennage

Page 10-15 and 10-16
Trim right side skin. Deburr all holes and edges. Dimple bulkhead holes. Countersinking and dimpling longhorns, skins, frames and bulkheads

  Jul 21, 2020     Tailcone assembly Category: Empennage

Page 10-14
Attach shoulder harness anchors. Drill cover plate.

  Jul 20, 2020     Aft deck drilling Category: Empennage

Attaching stop/doubler and angles to aft deck and final drilling all holes

  Jul 19, 2020     Tailcone assembly and skins Category: Empennage

Section 10 Pages 8-12
Fabricate and attach rudder stop brace. Attach tailcone skins to bulkheads and longhorns. Attaching aft deck and horizontal stabilizer attachment angle. Match and final drilling. Attach and final drill top skins.