Project: SpiritOfMudsuck   -  
            Listing for Category : interior finish
    (Please mouse-over any icon to get a description of that function).


  
Builder Name:Pete Dailey   -  
Project:   Sonex - Xenos-B Motorglider   -   VIEW REPORTS
Total Hours:1506.3
Total Flight Time:
Total Expense:$75148.03
Start/Last Date:Jul 01, 2016 - No Finish Date
Engine:Aerovee 2.1 Turbo
Propeller:Sensenich
Panel:MGL Avionics Explorer iEFIS/ECB/RDAC
 
Friendly URL: https://eaabuilderslog.org?s=SpiritOfMudsuck

Home or Last Project Picture

May 04, 2022     Prep Cowl, wheel pants - (2.5 hours)       Category: Interior Finish
Sanded cowling and wheel pants in preparation for epoxy primer. Sprayed primer to wheel pants and cowling.


 
May 02, 2022     Forward Cockpit Final Epoxy Primer - (0.8 hour) Category: Interior Finish
Sprayed forward cockpit interior with epoxy primer. Removed masking tape, reinstall throttle and mixture quadrant.
 
Apr 15, 2022     Epoxy Primer - (2.1 hours)       Category: Interior Finish
Sand and second coat of epoxy primer to forward cockpit. Sand, prep, and apply epoxy primer to lower cowling.


 
Apr 13, 2022     Primer Coat to Forward Cockpit - (2.9 hours) Category: Interior Finish
Prepared forward section of fuselage by vacuum, cleaning with acetone, and taping holes and edges. Mixed a cup of epoxy primer and sprayed the forward section.
 
Sep 26, 2021     Prep for Primer - (2.2 hours) Category: Interior Finish
Masking with paper and tape in preparation for applying epoxy primer to forward cockpit area.
 
May 15, 2021     Lightening Hole Plugs - (0.2 hour)       Category: Interior Finish
After watching the local A&P removal a birds nest from inside the wing of a C172 during an annual inspection, a plane that had not been flown for three years, steps where taken to discourage birds or vermin from residing inside the Xenos wings. Purchased several 3 and 4" mailing tube plugs and test fit into the lightening holes in the inboard and outboard fore and aft wing ribs. Caps have a slight taper and ribbing that locks nicely into the holes. Will purchase additional and trying trimming a couple to clear aileron pushrods and spoiler control wires.


 


NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.