Been busy doing a bunch of small stuff getting ready for bigger stuff. Made a support for the return fuel line check valve under the console. Utilized the tailwheel locking bracket to mount an Adel clamp. Now that the baggage sack was in, I installed the headset panels for both the copilot and the pilot. Pretty happy with the way they turned out. I finally received my 22 inch tundra tires that don't wear out quite so fast on paved runways and got them mounted on the wheels. These don't wear quite as fast as the Alaskan 29 inch that are so expensive. Plan is to fly with these till I am flying the Kitfox on something other than paved runways and then swap the the larger tires. Built some attachments points and Hysol'd them to the bottom of the fuselage that will allow me to attach the bottom rear of the firewall. These will hold the firewall tight and flush to the bottom of the plane. Also started on the heater install. Got the brackets riveted to the heater itself and installed the heater pass thru in the firewall.