Nov 24, 2023     Control stick wiring - (2 hours) Category: Avionics

Wire control stick with three conductor with shield Teflon wire. PTT and CWS connected to Ry stick button. Auto pilot disconnect wired to pilots left trim. Will need to find out a better solution for auto pilot disconnect.

  Nov 21, 2023     Antennas - (4 hours)       Category: Avionics

Attached com ads-b and transponder antennas to lower fuselage. Manufactured antenna wires with appropriate BNC and TNC connectors.

  Nov 19, 2023     GPS Attachment - (3 hours)       Category: Avionics

Manufactured GPS attachment shelf and secured to seat roll bar with appropriate hardware. Shortened control stick and installed control switches.

  Jun 14, 2023     Installed PTOT static system - (4 hours)       Category: Avionics

  May 20, 2023     More wiring - (6 hours)       Category: Avionics

Finished wiring of P mags. Additional cleanup of wires and ignition. Not yet the final product but decent. Finally flipped the switch. No smoke. A great day. Have to troubleshoot the alternator field which shows +12 V even with the alternator off. Possibly a wrong pin in the connector on the forward Fuselage cable.

  Apr 11, 2023     More panel - (3 hours)       Category: Avionics

Cut additional openings in panel for remote Avionics boxes

  Apr 09, 2023     HDX1100 mounted - (4 hours)       Category: Avionics

Cut out in panel to template of HDX 1100. Secured with MK 1000–06 nut plates.

  Apr 03, 2023     Avionics started - (4 hours)       Category: Avionics

Mounted several boxes with 8-32 rivnuts.
Removed starter in preparation for 12v exchange. Measured hose lengths in preparation for order of completed conductive Teflon hose package.