Project: cwagner   -  
            Listing for Category : paint / decals
    (Please mouse-over any icon to get a description of that function).


  
Builder Name:Chris Wagner   -  
Project:   Tucano Replica   -   VIEW REPORTS
Total Hours:612
Total Flight Time:
Start/Last Date:Apr 12, 2022 - No Finish Date
Engine:Rotax 912iS
Panel:Advance Flight Systems
 
Friendly URL: https://eaabuilderslog.org?s=cwagner

Home or Last Project Picture

May 20, 2023     Fuselage Wrap - (4 hours)       Category: Paint / Decals
Continued to apply the wrap to the fuselage.
Getting better at applying the wrap over the many rivets.
Need to apply a few more sections.


 
May 07, 2023     Wrapping fuselage - (4 hours)       Category: Paint / Decals
Completed wrapping the bottom of the fuselage.
I really under-established how much wrap is needed to do the fuselage - so I have more on order.
Now that the bottom is done, I'm going to install the engine mount and landing gear - I've reached the point where I don't need to rotate the fuselage.


 
Apr 30, 2023     Wrapping the fuselage - (8 hours)       Category: Paint / Decals
I've been researching how to wrap vice paint the airplane.
A lot of builders use wrap to put traim on the aircraft, but few wrap the entire plane.
I decided to take a chance and try to wrap the fuselage. If it doesn't work out, I can always peel it off. However, it not easy to remove a wrap - a lot easier than removing paint.
Instead of trying to wrap large sections at a time, I'm applying smaller section that match the skin sections. This is working very well. Although I need another set of hands for the big pieces.
The biggest challenge is smoothing over the rivet heads - because they're so many of them.


 


NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.