Apr 29, 2024     Monday Session - (2 hours)       Category: Workshop

Stihl moped and cleaned out the bathroom.
Matt and Ryan sanded and trimmed the wings so they could be sealed.
Logan and Aaron put on seal for the fuselage.
Addison traced out where the wing would properly fittted.

  Apr 28, 2024     Sunday Session - (3 hours)       Category: Workshop

Stihl and Brady sanded the cockpit to flush.
Addison helped install the avionics system updates.
Ryan helped put the wing on the plane.
Logan also helped put the wing on.

  Apr 23, 2024     Tuesday Session - (2 hours)       Category: Workshop

Addison and Jacob put oil and they burped the engine.
Ryan sanded down more of the canopy.

  Apr 22, 2024     Monday Session - (2 hours)       Category: Workshop

Addison, with the help of Larry and Brandon, pitched the prop and put one the nose cone.
Logan and Stihl sanded and cleaned up the canopy fiberglass.
Ryan removed the protective plastic cover on the rear window.

  Apr 21, 2024     Sunday Session - (2 hours)       Category: Workshop

Ryan and Stihl did a flight plan.
Troy installed the interior carpet and panels.
Brady worked on the fiberglass on the canopy.
Addison worked on bolting down the radiator.
Zach and Quinn worked on the avionics bay install.

  Apr 15, 2024     Monday Session - (2 hours)       Category: Workshop

Stihl, Logan, and Addison started a fire with the leftover recycling.
Matt and Ryan started putting the seats and covers over the interior of the plane.
Ethan sanded the canopy to flush fitting.
Addison also finished making the bracket for the radiator, and installed Gremits.

  Apr 14, 2024     Sunday Session - (3 hours)       Category: Workshop

We all sanded extra fiber glass off the plane.
Stihl, Ryan, and Logan washed off some of the excess tape with alcohol.
Addison and Cali worked on the service bolts in the radiator.

  Apr 09, 2024     Tuesday Session - (2 hours)       Category: Workshop

Jacob, Ryan, and Aaron started to sand and shape the fiberglass.
Addison created some sanding sticks and studied the safety bulletin for the radiator.

  Apr 08, 2024     Monday Session - (2 hours) Category: Workshop

We added strips of fiberglass so that there is a smoother transition on the sides, and added microbeads to fill out low spots on the middle.

  Mar 18, 2024     Monday Session - (1 hour)       Category: Workshop

Addison, Troy, Ryan, Stihl, and Logan worked on prepping the canopy for fiberglass by lining up the fiberglass template and scuffing the correct surfaces with 80 and 100 grit sandpaper.