Jan 26, 2020     Rudder cables - (2.3 hours)       Category: Controls

Installed rudder cables and turnbuckles. All good!

  Dec 08, 2019     Throttle quadrants - (.5 hour)       Category: Controls

Fitted forward and aft throttle quadrants.

  Oct 24, 2019     Rudder control - (3.5 hours)       Category: Controls

Installed toe brakes, both master cylinders. Fabricated and swaged router control cables to aft of cargo compartment. All swages within spec.

  Oct 23, 2019     Flap cable - (2.1 hours)       Category: Controls

Apparently I really needed practice with swaging. It took four tries to get the two ends of the cable swaged. Very happy with the outcome now.

  Oct 23, 2019     Pulleys - (1 hour)       Category: Controls

Installed aileron and flap control pulleys.

  Oct 22, 2019     Pulley guards - (1.1 hours)       Category: Controls

Fabricated pulley guards from .032... Took a while to get the measurements right, but eventually found an ideal forming block to make these.

  Oct 21, 2019     Stick carrier - (2.3 hours)       Category: Controls

Finished installing stick carrier, and connected to primary elevator pushrod. Nut and bolt clearance inside stick carrier was very tight and required cutting and drilling bolts to custom length. I am very happy with the outcome.

  Sep 29, 2019     Stick carrier - (2.5 hours)       Category: Controls

Fitted and installed control stick carrier and elevator idler arm. Installed more fairleads. Missing 3 from hardware kit.

  Sep 28, 2019     Flap handle - (2.3 hours)       Category: Controls

Fitted and installed flap handle assembly.

  Sep 08, 2019     Brake pedals - (0.5 hour) Category: Controls

Fitted and installed front and rear brake pedals.