Dec 08, 2021     Tailcone Assembly - (3 hours)       Category: Tailcone

Attaching the vertical-stabilizer assembly to the tailcone assembly using fasteners, installing the lower hinge assembly, and temporarily installing the rudder assembly.

  Dec 01, 2021     Riveting install doublers to servo tray - (1.5 hours)       Category: Tailcone

  Nov 17, 2021     Riveting skins to tailcone - (3 hours)       Category: Tailcone

Riveting the skins to the tailcone

  Nov 03, 2021     Attaching skin, wires to tailcone - (2.5 hours)       Category: Tailcone

Attaching skin and wires to the tailcone from the inside

  Oct 27, 2021     Installing the static air system - (1.5 hours)       Category: Tailcone

  Oct 20, 2021     Tailcone fuselage bulkhead and skins - (2.5 hours)       Category: Tailcone

Prepped the tailcone for the fuselage bulkhead and skins. Attached the fuselage bulkhead.

  Oct 13, 2021     Constructing tailcone-fuselage bulkhead       Category: Tailcone

  Oct 13, 2021     Assembling tailcone       Category: Tailcone

  Oct 06, 2021     Match drilling Fuselage bulkhead - (3 hours)       Category: Tailcone

  Oct 06, 2021     Assembling Tailcone Skins - (3 hours)       Category: Tailcone

  Sep 29, 2021     Deburring Tailpieces - (3 hours)       Category: Tailcone

  Sep 22, 2021     Fabricating the skid bracket for the tail cone - (3 hours)       Category: Tailcone

Match drilling holes in the skid bracket for the tail cone

  Sep 15, 2021     Fluting tailcone ribs - (3 hours)       Category: Tailcone

Fluting the tailcone ribs so that the parts lay flat when riveting

  Sep 08, 2021     Breaking edges of the top and bottom skins of the tailbone - (2.5 hours)       Category: Tailcone

Breaking edges of tailcone skin (F-1278, F-1280-L&R, F-1281-L&R, F-01282L) using the breaker. Broke them in the direction of the J-stiffener. F-1278 increase the break towards the back. Skipped the deburring because it wasn't effective