EAA Builders Log Site

Project: Sport -
Listing for Category : Show all entries

(Please mouse-over any icon to get a description of that function).

Categories


Builder Name:	Barry Cole -

Project:	Sport Performance - Panther - VIEW REPORTS
Total Hours:	562
Total Flight Time:	4.6
Start/Last Date:	Jan 01, 2018 - No Finish Date
Engine:	Lycoming O-320

Friendly URL:	https://eaabuilderslog.org?s=Sport

Home or Last Project Picture

Jun 04, 2020 Riveted fuel tanks on - (3 hours)

Category: Wings

After filling tanks completely full and letting them set for 5 days, I was happy to have no leaks! Went ahead and riveted them on .

IMG_3196[1].jpg

May 29, 2020 Dissassembled Carb - (1 hour)

Category: Fuel System

Disassembled carb for minor overhaul.

IMG_3179[1].jpg

May 29, 2020 Baggage compartment & Elevator push rod tunnel. - (8 hours)

Category: Fuselage

Today I worked on finishing the elevator push rod tunnel installation and also fabricated the optional baggage compartment panels. Then I installed the previously fitted top skin formers aft of the seat. I also filled both fuel tanks to be sure that there are no leaks before installing them to the wings.

IMG_3183[1].jpg

IMG_3184[1].jpg

IMG_3186[1].jpg

May 14, 2020 Fitting wings and flaps to fuselage etc - (14 hours)

Category: Wings

Cut flaps to length, installed inboard rib on both flaps after cutting. Installed drive horn for flap linkage. Mad spring mounts for flap retainer for folding wings. Finished fitting wing walk doubler and riveted it on. Finished riveting wing skins on. Ready for fuel tank install.

IMG_3143[1].jpg

IMG_3144[1].jpg

IMG_3145[1].jpg

IMG_3146[1].jpg

IMG_3147[1].jpg

IMG_3148[1].jpg

IMG_3149[1].jpg

IMG_3150[1].jpg

IMG_3151[1].jpg

IMG_3152[1].jpg

IMG_3154[1].jpg

IMG_3155[1].jpg

May 12, 2020 Aileron and flap rigging - (12 hours)

Category: Wings

Installing bell cranks, push rods and joiners for aileron and flap controls. Finished installing control stick. Finished flap handle. Prepped for cutting flaps s12 inches shorter.

IMG_3135[1].jpg

IMG_3136[1].jpg

IMG_3137[1].jpg

IMG_3138[1].jpg

IMG_3139[2].jpg

IMG_3140[1].jpg

IMG_3141[1].jpg

IMG_3142[1].jpg

Apr 29, 2020 Installed optional folding wing components. - (4 hours)

Category: Wings

Fitted wing support brackets to fuselage which included drilling through the side skins and one additional hole through a gusset on the forward hole of bracket. Fabricated the universal joint on the brackets and also the wing support slide tubes so they are ready to install later on.

IMG_3071[1].jpg

IMG_3073[1].jpg

IMG_3074[1].jpg

IMG_3075[1].jpg

IMG_3076[1].jpg

IMG_3072[2].jpg

Apr 29, 2020 Flap lever and linkage - (3 hours)

Category: Controls

Installed flap lever and adjuster arms.

IMG_3069[1].jpg

IMG_3070[1].jpg

Apr 24, 2020 Aileron bell crank installations. - (6 hours)

Category: Controls

Installed bearings in bell cranks and made aileron push tubes. Cut clearance for bell crank on number 1 wing rib on left wing.

IMG_3010[1].jpg

IMG_3011[1].jpg

IMG_3012[1].jpg

IMG_3013[1].jpg

IMG_3015[1].jpg

IMG_3019[1].jpg

IMG_3020[1].jpg

Apr 23, 2020 Installed Wings - (6 hours)

Category: Wings

Installed wings and adjusted the guide plates and rollers. Checked wing incidence after leveling fuselage. Then we measured triangulation from firewall to back corners of each wing. It was withing 1/32"". Very happy with how easy this step was, lock pins slide in effortlessly after proper adjustment. Drilled rear spar holes once everything was set. Drilled aileron joiner and removed wings. Installed nylon spacers for rear spars. Began assembly of aileron push tubes.

IMG_3001[1].jpg

IMG_3003[1].jpg

IMG_3004[1].jpg

IMG_3005[1].jpg

IMG_3006[1].jpg

IMG_3007[1].jpg

IMG_3008[1].jpg

IMG_3009[1].jpg

Apr 22, 2020 Finished installing elevator trim cable. Completed final assembly of tail section. Installed spar guide blocks and adjusters. Installed flap detent plate. - (6 hours)

Category: Controls

Finished installing elevator trim cable. Completed final assembly of tail section. Installed spar guide blocks and adjusters. Installed flap detent plate.

EB4C9AD5-9DA8-4413-8BFF-5734DA5E5150.jpeg

10D8F085-2E98-4BB3-9ACD-5106D129334A.jpeg

13D96CF1-FA5F-444E-AE4F-4741D65F386F.jpeg

2813A02E-569E-4463-8ECE-1669BBF375CF.jpeg

A7D1EA30-73A7-4AB2-961D-FCFDE1971093.jpeg

Apr 21, 2020 Riveted tail section after rigging. - (2 hours) Category: Controls

Riveted tail section after rigging.

Apr 21, 2020 Riveted tail section after rigging. - (2 hours)

Category: Controls

Riveted tail section after rigging.

DCAD5FEE-9FCB-4BD2-844D-0A091D7D1056.jpeg

Apr 21, 2020 Riveted bottom forward skin on, worked on fitting rudder pedals. - (3 hours) Category: Fuselage

Riveted bottom forward skin on, worked on fitting rudder pedals.

Apr 21, 2020 Cheek and joggle fitment, exhust tunnel. - (8 hours)

Category: Fuselage

Fit left side cheek former's and skin. Finished fitting both cheeks, de burred and dimpled cheeks and former's. Began fitting joggle strips for cowling.

015e9410b5b99d0a28686b99788ab1cb3700026bb0.jpg

Apr 20, 2020 Installed aileron hinges and riveted skins on to right wing. - (6 hours)

Category: Wings

Riveted right skins on, drilled and installed both aileron hinges to rear spars.

0118d76f47bfe949b9646c93a6212a04ad1c576057.jpg

Apr 20, 2020 Riveted more ribs. Ran pitot tube. Conduit - (7 hours)

Category: Wings

Riveted left wing ribs to main spar. Installed pitot tubing through ribs. Installed plastic conduit through ribs for wiring. Installed bearings in aileron bell cranks. Squared left wing for skinning.

016b876945ca5eb6b428c0c97aa0ff731f2468534a.jpg

01ecd1e0a73fbf519400296853c54502c1a339f0fa.jpg

Apr 19, 2020 Fuselage construction

Category: Fuselage

Photo Oct 28, 15 06 09.jpg

Apr 19, 2020 O-320 A1A Assembly - (40 hours)

Category: Engine

Assembly and powder coating of O-320.

Photo Apr 13, 10 30 48.jpg

Photo Apr 13, 10 30 59.jpg

Photo Apr 13, 18 06 21.jpg

Photo Apr 14, 09 04 51.jpg

Photo Apr 14, 10 08 15.jpg

Photo Apr 14, 17 13 42.jpg

IMG_3121[1].jpg

Apr 16, 2020 Elevator balance, rudder cables, return springs etc - (12 hours)

Category: Controls

Installed elevator balance weight, installed rudder cables, installed rudder return springs and bracket, installed rudder pedal adjusters. Fitted rudder horn stops. Ran elevator trim cable. Checked rudder travel.

IMG_2972.jpg

IMG_2974.jpg

IMG_2975.jpg

IMG_2976.jpg

IMG_2977.jpg

IMG_2978.jpg

IMG_2981.jpg

Oct 29, 2019 Finished elevator aft push tube and painted it. Worked on elevator balance weight brackets. Made master cylinder extensions and mounted master cylinders. Set brake pedal locations. - (7 hours)

Category: Controls

Finished elevator aft push tube and painted it. Worked on elevator balance weight brackets. Made master cylinder extensions and mounted master cylinders. Set brake pedal locations.

0129da0e8547836ebd90062ddc8b14a453581ea217.jpg

014879fb781ab16563d97663fa3161c52296abea6e.jpg

018d7598798f87c16ca83bf11b5bc57a70dd3026e5.jpg

019859205d88cf76ffc384dad6b9af22fca36b602c.jpg

01e81f74ef89bb358e7b65c6f81670786774471028.jpg

01ecae66243a7b1512190f6aad54278340e8e37a4f.jpg

Oct 28, 2019 Removed vertical stabalizer to install elevator down stop. Worked on elevator aft push pull tube. - (4 hours)

Category: Controls

Removed vertical stabilizer to install elevator down stop. Worked on elevator aft push pull tube.

01021146293c2834d22e2e67ce9d6f62fb742f0817.jpg

01439f200ceafeaece55ed0d4810f8dc377f28975c.jpg

0161cadaf385255eb2de1d3c844254352e22ef1732.jpg

0178f1a2f6f3958d8eb1018ce4aff761ddaf62878e.jpg

Oct 15, 2019 Removed Elevators and riveted inner ribs and drive horns onto inner ribs. Reinstalled elevators and re leveled. Drilled hole in drive horn for heim bearing installation per build manual. - (5 hours) Category: Fuselage

Removed Elevators and riveted inner ribs and drive horns onto inner ribs. Reinstalled elevators and re leveled. Drilled hole in drive horn for heim bearing installation per build manual.

Sep 13, 2019 Installed elevators and leveled and fixtured for elevator drive horn installation - (2 hours)

Category: Fuselage

Installed elevators and leveled and fixtured for elevator drive horn installation

010eb1064fb45906103e6be37c3405b27a88ea2974.jpg

011ed144d3cb1d2fc8018dc767a70514eed00c1886.jpg

018013fe61dbd8ee074b0b30bbc0d0ac0b55a9ea84.jpg

0182e29134253e1a7e524ffc36eb0d3d64cbbeb1e8_00001.jpg

01da1e070694bb6e2692d261fde97769510d8e58e7.jpg

Sep 12, 2019 Assembled and installed control stick assembly. Installed nylon slide nblocks for wing spars. - (14 hours)

Category: Fuselage

Assembled and installed control stick assembly. Installed nylon slide nblocks for wing spars.

0134348f76732c3fa9282076c891a98955b7fe7bb7.jpg

016f2c534c67ef9644bcd72ddc001afa55afcd298b.jpg

018ea402c678a7fd4a40fe4a1e26e88939b9ba7687.jpg

01c63fe79756fb3438dc2071db751631da0e6b2d22.jpg

Sep 11, 2019 Installed rudders and brake pedals. Installed upper and lower nylon blocks for spar sliders. - (4 hours) Category: Fuselage

Installed rudders and brake pedals. Installed upper and lower nylon blocks for spar sliders.

Aug 21, 2019 Bottom skin fitting, assembly of rudder and brake pedals. - (8 hours) Category: Fuselage

Did final fit of bottom skin and prepped for final riveting. Started assembling rudder and brake pedals.

Aug 20, 2019 Upper panel, seat back construction. - (12 hours)

Category: Fuselage

Built forward upper fuselage panel between inst cluster and firewall. Built seat back assembly.

011be3a43a0384f450b81a3772b3b77d4397d7dd60.jpg

0129ae67a3a517d58e11f5c6fb6ed1117f6366857d.jpg

0144d03ef4521d0b7bf04ed89fdfa98cf80e71bed3.jpg

014a8eeabd3cc041c2be63980c489bf89fda1b7a37_00001.jpg

01590d335a6c1f011bb2d5deb0957bcd7870e8c6ff.jpg

0163e8997e789cdf157743445dcb26853f59a611e6.jpg

017214c7a41cb6be2566ceffa2a578df34a354c5d9_00001.jpg

017df6744e2f45b7a6d895d7ed5a2aa0bcba2622e1.jpg

018ef8582cec1a416614ad68ba8f05a9629a5c3c78.jpg

019576c4b76daecf0388c909a0f22ce6e3fc677caa.jpg

019f28800072bc29a95b355ce254ee044d824ff38c.jpg

Aug 01, 2019 Fit front cheek former's. - (5 hours)

Category: Fuselage

Fit front cheek former's.

0135972664d3895206a8aff851c71b61b3fd92b66e_00001.jpg

01361b3088b7bde24806184945c958aae31ff5e293.jpg

018c063226e59d1a0a7873d4328e185a07d4626afb.jpg

01dd7ac5cffc2a0ee88d01c799f758c677636ec471_00001.jpg

Jul 26, 2019 Fit vertical stabilizer, worked on main gear - (9 hours)

Category: Fuselage

Fit vertical stabilizer and up drilled and bolted on to tail cone and horizontal. Fit and prepped main landing gear for paint. Made attach brackets for main gear and painted all components. Mounted tires to wheels.

0105d78134e0b0108bf5aec4beb33b7b1ff4f88ac8.jpg

011d1f7b7ffb9bcff6e06463fc23ff23257123c55b.jpg

01372d7aab0c694bf0b4b90f87ca0f98f0fd8b7d05.jpg

0150a536efe2b8b3d79f223583a91dccfd1e561de3.jpg

015eda0afacd29d403bd12cef36d941dd16b802b7e.jpg

0165a968cc5583e39ab8c9d05be9ae4d63156b6732.jpg

01a96a7bec8a04f59d74070231e6524e6a7818d5e1.jpg

01d800d20ff9e01be68b326a91226d9f80ba26e6a8.jpg

01efc0419b735d7c7aaec3fdee665590f0e5e47301.jpg

01fbb4fa5a93ff9f50b1ab9db66c01bbc15fddbcfb.jpg

Jul 25, 2019 Fit and up drilled all horizontal brackets - (5 hours)

Category: Fuselage

Fit and up drilled all horizontal brackets and mounted horizontal with bolts. Began fitting vertical stabilizer.

01cb5fc579363c0f038a8fcf84db8f0f9e6d494ceb.jpg

Jul 10, 2019 Fit horizontal tail and brackets - (5 hours)

Category: Fuselage

Fit horizontal tail and brackets. Leveled and squared horizontal to fuselage. Trimed horizontal to fit tail cone. Appled service bulliten to correct angle of incidence to 0 degrees.

0149a466898d0a823e46eb05e38fcb8f690f609f8d.jpg

0181ec047b369c279380211757d6011dffb81431d1.jpg

01cb5fc579363c0f038a8fcf84db8f0f9e6d494ceb.jpg

01ceaec5e12f5a6a8533caed04b96759a8f73de7ef.jpg

Jun 20, 2019 Joining tail cone to front cage. - (14 hours)

Category: Fuselage

Fit front fuselage to tail cone, remove, debur and dimple holes. Bolt two together.

$gallery thumbnail$

0154dc143e293438031569b4374abf37b3af4eca64.jpg

01815320e71f6367c1b3a4d366c7ad6195c33e3a58.jpg

01998b6f090071538865a5845d42cef31131b6284c.jpg

01a79c8bbd3a7ff10cd63e999a3e4426731569789c.jpg

01f34b579af8b4fc21508ca1e79d34dba1c55a1ffe.jpg

Jun 19, 2019 Started fitting skins to fuselage cage. - (4 hours)

Category: Fuselage

Started fitting skins to fuselage cage.

019d2ceff56188d63c712d473fb9c0ee1a2eb6eb65.jpg

01ddc1e26b234b9cada98ca4159763310e2f42f7b3.jpg

01fc4a70e0c170398d8857aae371656cd8885850be.jpg

Jun 12, 2019 Tailcone final assembly - (8 hours)

Category: Fuselage

Assembled and worked on final assembly of tail cone. Finsihed all riveting except bottom skin to longerons.

019c58cb590a5db135c9843efa3d70fa2cddd04c4f.jpg

01e7fa968ab6ee77bb51eed24bfcf0842e25dfa709.jpg

Jun 06, 2019 Tail spring mount and tail cone rear. - (16 hours)

Category: Fuselage

Finished assembling tail cone and tail spring mount. Dissassembled for debur and dimpling.

0130e0131d7ffef7065d58b8c9c18167dfab857a6e.jpg

01426eef19f8600752e81d00fc46d56919ef2860e8.jpg

01addd3aa2b43c17bd341291280a53b48a41dd3be1.jpg

01ce3890480fc76f58480bcc05f5bacc5c6510f8a5.jpg

Jun 02, 2019 Worked on assembly of push rod tube cover. - (4 hours)

Category: Fuselage

Worked on assembly of push rod tube cover.

01f308c278321be84e09ba03cc7619924018875420.jpg

May 22, 2019 Assembled side panels and bottom panel to bulkheads, squared assembley and updrilled. - (8 hours)

Category: Fuselage

Assembled side panels and bottom panel to bulkheads, squared assembley and updrilled.

013ae65dce3a0604b23a68d21ea2137bad50045e71.jpg

01669171135e2482d1f8ec595a32dbd8e33d09b74f.jpg

01788af4a9b662dbd535530489bad30a79951e90d9.jpg

Apr 24, 2019 Assembled upper formers and upper skins on rear fuselage. - (3 hours)

Category: Fuselage

Assembled upper formers and upper skins on rear fuselage.

011db9b752b8f26a3c49cbf4315f2653cedaaa8fd4.jpg

011f5c017e04d1be2e109bcb894d3193c11b21a23f.jpg

01a9d2437fdadef996ec6facef394337d64886936a.jpg

Apr 22, 2019 Fitted longerons & stiffners to rear tail cone panels. - (8 hours)

Category: Wings

Fitted longerons and stiffners to rear tail cone side pannels. Disassemled, deburred and dimpled rear cone side panels.

01defc89bd59c025c31cdcafedc9c4a112a7abad3b.jpg

Apr 21, 2019 Fitted and assembled bulkheads. - (5 hours)

Category: Fuselage

Fitted and assembled bulkheads.

01311e0212fb88d091bc925bf478fa4bd0793b72f5.jpg

Apr 16, 2019 Installed elevator balance weight, installed rudder cables, installed rudder return springs and bracket, installed rudder pedal adjusters. Fitted rudder horn stops. Ran elevator trim cable. Checked rudder travel. - (12 hours) Category: Controls

Apr 10, 2019 Fitted fuel tanks to wings - (8 hours)

Category: Wings

Fitted fuel tanks to wings and drilled holes where needed to tank attachment to spars. Deburred and dimpled. Countersunk spars where needed.

01aaff2824e7db597291a3e23fa1ffb32dc256763a.jpg

01cb3c3a9d70b359022b1d516f23cdcdadc4ee5a1b.jpg

01d324c615f31966e715620bb2c46a6dda6a5074b8.jpg

Feb 22, 2019 Left & Right fuel tank assembly proceedure. - (33 hours)

Category: Wings

Assembled left fuel tank, installed fuel sender and made float arm to specs. Fitted fuel cap flanges and fuel tank drains. Dissasembled, deburred and dimpled left tank. Cleaned and scuffed skin. Installed fuel sender and used Flamemaster B2 while riveting fuel cell together. Same process used for right tank.

010489ef3a251745aa77c4c65fce262d24f50efdcf.jpg

010ed3fcea375a4d211573083be622e4a7cd39f971.jpg

0127a1b757f019bf1c7f64530f5773576c8e8e85b1.jpg

014113ab9fe7b5967ee8513e40afac5102246f3aa1.jpg

01641c6ea4949836233241ad101d482d53fb03db51.jpg

0164498d5845d2aa1a24a2307da15cbf366729d6f3.jpg

016ac666db038ad4fd76250ee9d70a99b794b64458.jpg

017bc8fc9eba47692e761d1e377fdc24a9eeb822a5.jpg

019a58bf0d17db4449d0cf49add8018a038982a449.jpg

01b045118d7447daacb74df4a4c5a4cf9acabb5b74.jpg

01b86026e89dbe2ee46e958f34da57dd9c909ed511.jpg

01c44e5b5bd7e9b36ac99eafd88ddcd8497cce8ce3.jpg

01ec2b65823ad3f21edb8c993be05262da18af3ad1.jpg

Feb 19, 2019 Built fuel tank jig. - (2 hours)

Category: Fuel System

Made fuel tank jig for fuel tank construction.

011035379b78b35868e7347a58db2f57555dd392be.jpg

013ba833e741744354adc3633e7a0a63a7ef2f576d.jpg

016f1b63e374c73bd63e78ae5a735bb505f673456d.jpg

01d87938799982958b7bef4813a01a464aee01554e.jpg

Feb 18, 2019 Finished wings, on to fuel cells. - (12 hours)

Category: Wings

Installed wing skins and leading edge skin. Deburred and dimpled all skins. Deburred ribs and dimpled ribs. Countersunk spars, riveted rear spr plate on, dimpled rear spar, installed skins on.

0118d76f47bfe949b9646c93a6212a04ad1c576057.jpg

Feb 17, 2019 Squared and leveled right wing, began installing upper wing skins. - (2 hours)

Category: Wings

Squared and leveled right wing, began installing upper wing skins.

01f0728b846996c2508520f4719288625faeda18f9.jpg

Feb 09, 2019 Installed pitot tube connection and riveted the skins on the left wing. - (4 hours)

Category: Wings

Installed pitot tube connection and riveted the skins on the left wing.

0119dd838b4dbaa51e025e8206b2ddc3ed62efe9eb.jpg

014af20fd477409e053c18335fce61cb39c5dc31a8.jpg

0165524e003774e225b3f35fa99b1b8822898121d9.jpg

Feb 08, 2019 Debur, dimple and countersink. - (4 hours)

Category: Wings

Debuured and dimpled the left wing ribs and countersunk main spars. Installed skins back on to wing. Checked all hole alignment and dimples.

010fefa0bd9d7aeaaea9dfdba71edb2aa39b3f6c60.jpg

01e52645084f584f39675754f38b5ab951ca6a2926.jpg

Feb 07, 2019 Debur, dimple repeat. - (8 hours)

Category: Wings

Worked on deburring and dimpling left wing skins. Installed pitot doubler and pitot fitting. Started deburring ribs and preparing to dimple ribs. Finished dimpling left wing skins.

01755268390bd5bf7c8151ec8e28dfbfcbd396c613.jpg

018398b0e1e275d78459dee4e2de713ee90147fe7d.jpg

01e52645084f584f39675754f38b5ab951ca6a2926.jpg

Feb 06, 2019 Removed skins from left wing for deburring and dimpling. Made inspection plates for both wings and installed left plate on skin. - (8 hours)

Category: Wings

Removed skins from left wing for deburring and dimpling. Made inspection plates for both wings and installed left plate on skin.

0164da0eeeef5db3ff581eac120c9cc2abeb16f0b7.jpg

0194cae3b569b20b3884104a346ac9dd2e069c7921.jpg

01f3e1328a01f436ac3b20919557084f71c6189700.jpg

Feb 05, 2019 Fitted all skins and updrilled to #40 on left wing. - (7 hours)

Category: Wings

Fitted all skins and updrilled to #40 on left wing.

01344a358d0a5fcd827c92311157dc724f6e40b378.jpg

017a7cc9c4f1b898993cb61d7d5ae301ec2ade3e3f.jpg

0195f432c4f5f19dc1653666a3649fc9632e7548ad.jpg

01a9cf0856a2917a54ec02d81a3870d8b472ebafe1.jpg

01b1cf0736a27e068b9fde3041f597a7ca969370b8.jpg

Feb 03, 2019 Mounted right wing ribs and riveted. - (5 hours)

Category: Wings

Riveted right wing ribs to main spar. Started on left wing.

0104a4ddefaa95dd171a4bf0d9ea40fa82de62d2ea.jpg

01668f2a9e69eb905938166c32b24a8b03d5cc3b25.jpg

018de501932927d865e98ef70cea3ca9541b516e9a.jpg

Feb 02, 2019 Shortened rear spars as per plans for sport wing. Cut holes in rear spars for aileron drive linkage. - (2 hours)

Category: Wings

Shortened rear spars as per plans for sport wing. Cut holes in rear spars for aileron drive linkage.

0162683e3187d718e97fc2bf56a5500fe5f39b8eaf.jpg

Jan 31, 2019 Spar construction - (52 hours)

Category: Wings

Spent 52 hours assembling both wing spars using hydrolic squeezer from SPA. Worked out great!

HPIM1659.jpg

HPIM1660.jpg

01117e3fa265a5cd9e8e824da3a714726e60e7e0c6.jpg

0114e6cda0ba3ef07eda49a7466779d9b2c0098ab6.jpg

0132e24dd28a2487b0a2cc8df8f045a94fe1f70b37.jpg

0166e746b7e192a25a3abccdc768d91521f68c11e4.jpg

017e052d5f83e56b5b161768a4e4db78a45a778d85.jpg

Jan 24, 2019 Wing construction

Category: Wings

Wing construction

HPIM1659.jpg

HPIM1660.jpg

HPIM1661.jpg

HPIM1664.jpg

HPIM1665.jpg

HPIM1666.jpg

HPIM1668.jpg

HPIM1673.jpg

Jan 17, 2019 Aileron Construction - (16 hours)

Category: Controls

Started and finished ailerons.

01396a8a5e87e26c8662d9962b804bf3e8ce48ca9d.jpg

014112dbc68336460c6714df5fcd0d92f00e4528cf.jpg

015f46bf91ee52f5707a5e20d1f37f04369e2ccb8c.jpg

0168e66b33917dfb065239ad4b8c2140872e734529.jpg

016af0cc43d466241cafbe1cda00b60e3e38d4587e.jpg

01d922930cbe3669518cafff80d2476bcf06b0cdec.jpg

01dec14498862814f81b0453b922590cea394ef190.jpg

01ed6c9d68dd43b5a0bb4e2d85801a4ed22f8123b7.jpg

Dec 22, 2018 Flap construction - (11 hours)

Category: Controls

Construction of flaps and installation of flap hinges.

01afe18d3584add7cf2972c3fa68a7e931fe103169.jpg

Jan 26, 2018 Building of the empennage. - (62 hours)

Category: Empennage

Photos of the horizontal stabilizer, vertical stabilizer, elevator and rudder.

15.jpg

23.jpg

25.jpg

26.jpg

30.jpg

Photo Feb 18, 18 09 09.jpg

Photo Feb 19, 12 05 56.jpg

Photo Feb 19, 12 28 06.jpg

Photo Feb 19, 15 54 57.jpg

Photo Feb 20, 13 51 41.jpg

Photo Feb 25, 13 05 08.jpg

Photo Feb 27, 20 09 00.jpg

Jan 09, 2018 Kit Delivered, Inventory checked. Unpacked - (5 hours)

Category: Workshop

Kit delivered, had some damage to cowling, but everything was fine. Unpacked everything, checked for damage and organized the parts and hanger.

1.jpg

2.jpg

7.jpg

Dec 31, 1969 Set up wing jigs and began working on wing ribs. - (16 hours)

Category: Wings

Set up wing jigs and began modifying the wing ribs according to build manual.

01178ce6da587789841b4d2c51828d9d2215b16330.jpg

0176fe8b43551f337a943979f6b7d1ef080c7115b8.jpg

01f88d781e50d4ed9a972a6e4e2b95135bcb037f32.jpg

01fe08a66763c74c81962a6b7118e1f192994dcf9f.jpg