Sep 12, 2023     Wing Systems Rtg: Mounting heated pitot control box - (.7 hour) Category: 19:Wing Sys Rtg

  Jul 16, 2023     Wing Systems: tested the wingtip lighting on both wings. All good. - (2.0 hours) Category: 19:Wing Sys Rtg

  Jun 10, 2023     Wing Sys Rtg: Finish soldering zip tip pigtails - (3.0 hours)       Category: 19:Wing Sys Rtg

  Jun 06, 2023     WIng Sys Rtg: begin soldering left wing ziptip pigtail - (2.0 hours) Category: 19:Wing Sys Rtg

  Jun 05, 2023     Wing Sys Rtg: completed soldering right wing ziptip pigtail - (2.1 hours)       Category: 19:Wing Sys Rtg

  Jun 04, 2023     Wing Sys Rtg: Begin soldering ZipTip pigtails at wingtips. - (7.2 hours) Category: 19:Wing Sys Rtg

Began the process of solder the pigtails that come with the ZipTips. This brings all the wiring together so I had to spend a fair amount of time planning and figuring out the various wiring diagrams. I think I got it right! Also ran wires to the leading edge landing light bulbs which are connected in series with the ZipTip landing lights.

  Apr 08, 2023     Wing Systems Routing: routing and installation of factory harnesses. Planning continues. - (3.5 hours)       Category: 19:Wing Sys Rtg

I'm spending a lot of time with various sources and vendors to determine what needs to be changed to the factory setup to accommodate the changes and improvements that I am installing.

  Mar 08, 2023     Wing Systems Routing: running wires for autopilot servo in right wing - (.7 hour) Category: 19:Wing Sys Rtg

  Mar 06, 2023     Wing systems routing: begin routing harnesses - (1.2 hours)       Category: 19:Wing Sys Rtg