Jun 02, 2023     Installed air vent - (3 hours)       Category: Interior Finish

Connected flex hose to NACA vents on each side ... PIA placing and stuff in the way
Drilled and floxed in carbon tube to NACA vent for iPad mount air
Connected silicon hose from NACA vent carbon tube to iPad mounts

  May 27, 2023     Polished canopy glass - (8 hours)       Category: Interior Finish

What a PIA
Used sanding system from ACS first
Then used polisher from Harbor Freight with other #3 and #2 polish out of bottle

  May 11, 2023     Installed arm padding & glare shield - (4 hours)       Category: Interior Finish

  May 06, 2023     Installed canopy gas strut - (4 hours)       Category: Interior Finish

Floxed in 2 attachment points that don't interfere with carbon bar across
Went with 40lbs force strut from Amazon

  Apr 23, 2023     Installed seat belts - (6 hours)       Category: Interior Finish

What a PIA but after cutting extra access hole in center console installed and bolted in all seat belt fittings
Ken bent outboard connectors for me
I cut them down and drilled smaller 1/4 hole to fit existing attachment points

  Nov 16, 2022     Made glare shield - (16 hours)       Category: Interior Finish

Cut from G10
Mounted with clicos and then flush screws
Hard work to get to fit to panel top
Made tabs

  Oct 15, 2022     Installed arm rest hinge - (2 hours)       Category: Interior Finish