Jun 03, 2023     Swapped tires for better balance & fixed rotor wobble - (4 hours) Category: Landing Gear

Took out tires and saw significant flat spots
Replaced tires with other old tires but in better shape
Tightened rotor bolts to achieve best true alignment

  Jun 03, 2023     Swapped tires for better balance & fixed rotor wobble - (4 hours) Category: Landing Gear

Took out tires and saw significant flat spots
Replaced tires with other old tires but in better shape
Tightened rotor bolts to achieve best true alignment

  May 24, 2023     Installed Fobo BT pressure gauges - (2 hours) Category: Landing Gear

Left one has a bad thread but Chris got it on

  May 19, 2023     Redid brake lines - (8 hours)       Category: Landing Gear

Redid brake lines with aluminium tubing vs plastic
Fixed bend away from wheels

  May 02, 2023     Strengthened tailwheel spring - (16 hours)       Category: Landing Gear

Sanded tail spring for good transition
Added 2 layers of UNI and 2 layers of BID, then vacuum bagged
Added 2 more layers of BID for cosmetic round look
Drilled out tailwheel attachment from 5/8 to 3/4
Floxed tailwheel back onto larger spring

  Apr 16, 2023     Changed valve to fix tire leak - (2 hours) Category: Landing Gear

With Chris help, changed tube valve, now holds pressure and installed Fobo BT sensors

  Mar 27, 2023     Installed brake calipers & Bled lines - (8 hours)       Category: Landing Gear

Had Ken true my wheel to brake disk mount
Adjusted brake caliper mounts for more space for brake lines
Installed wheels & loosly brake calipers
Cut copper lines and extended with nylon lines
Bled fuel lines from calipers

  Mar 12, 2023     Brake Line Install - (8 hours)       Category: Landing Gear

Installed brake fluid cylinder
Installed brake lines from cylinder to top of toe brakes
Installed brake lines from each wing to bottom of toe brakes

  Feb 19, 2023     Aligned wheel axles - (16 hours)       Category: Landing Gear

Widen inner hole
Mark 2” fwd and 3” up for positive camber and toe out following David Gall advice
Move outside hole with bore sight

  Jun 12, 2022     Mounted new tailwheel - (3 hours)       Category: Landing Gear

Sanded down tailwheel spring
Floxed in new tailwheel attachment
Drilled hole & bolted together
Tested with a bounce per video ... redo with passengers inside

  Jun 12, 2022     Cut brake opening - (3 hours)       Category: Landing Gear

Took off old brakes
Disassembled & cleaned used brakes
Cut bigger holes in wheel pants for new floating brake mechanism

  Jun 12, 2022     Installed tires - (3 hours)       Category: Landing Gear

Removed old tires
Checked tubes
Fixed valve
Reinstalled with new tires