May 03, 2024     Misc - (0.5 hour) Category: Firewall

Installed insulated boots to positive side of battery connectors at battery, master and starter relays. Secured cable on arm of cabin air box. Filed a bevel to right door handle contactor plate to let the locking mechanism sllide over the fuselage tubing easier.

  Apr 17, 2024     Mount Category: Firewall

Drilled new holes in mount plate due to the threaded rod being in the way of the tubing. Reassembled jig with 1 degree right offset. Started to place tubes into position

  Apr 15, 2024     Mount - (0.75 hour) Category: Firewall

Removed engine from firewall. Removed u-brackets from mount and secured to engine mount jig.

  Apr 14, 2024     Mount Category: Firewall

Verified dimensions of firewall holes. Drilled mount. Marked location of engine mount plate on jig and drilled thru plate onto firewall plate. The engine plate is offset to the left due to the 1 degree right thrust

  Mar 25, 2024     Fittings - (1 hour) Category: Firewall

Drilled out bulkhead eyeball pass thru fitting to fit mixture and throttle cables. Installed fittings. Emailed VR3 engine mount drawing with new dimensions.

  Dec 28, 2023     Mount Category: Firewall

Tack welded a few more tubes in place

  Sep 12, 2022     Cabin heat       Category: Firewall

Drilled cabin heat box to firewall. Tried to mount GRT autopilot servis to mount but doesn't fit. RANS mount must be specific to Garmin.

  Jul 13, 2022     Firewall Category: Firewall

Marked firewall locations for all holes that need drilled.

  Jun 10, 2022     Brake       Category: Firewall

Drilled brake reservoir to firewall. Used S21 firewall drawings for location. Drilled thru tab and firewall for brake line T fitting and installed.