Mar 15, 2024     Seats       Category: Interior Finish

Located, drilled, and riveted seat frame sliders in place.

  Jan 21, 2024     Console       Category: Interior Finish

Located and drilled console to existing holes in interior mount. Wrapped console in fabric that we used on glare shield. Installed usb charger in console.

  Jan 28, 2023     Side panels       Category: Interior Finish

The forward side panels per RANS are riveted to the stick cover panels. Decided to add nutplates where riveted to split the pieces onto 2. This makes removal allot easier.

  Aug 13, 2022     interior       Category: Interior Finish

Rivet seat side panel brackets in place. Trimmed left side panel to fit. When screwed in place on center bracket the panel is able to easily vibrate. Will look into possibly making another mount to make more secure

  Jul 10, 2022     Seat pans Category: Interior Finish

Drilled and riveted on seat pan reinforcement angles. Used flush 18" solid rivets.

  Jul 09, 2022     Interior Category: Interior Finish

Installed center channel cover behind flap cover. Drilled and riveted angle to the F3 bulkhead. Adjusted this angle to match the angle of the cover. Drilled holes for the screws that attach cover to angle and flap cover.

  Jul 05, 2022     Flap cover       Category: Interior Finish

Final fit of flap cover. Used heat gun to soften plastic and the press indentation into it to give more space to clear bolt on the side. Glued on ABS strip and drilled holes.

  Jul 01, 2022     Rudder cable cover       Category: Interior Finish

Found exit location of rudder cables in fairing. Marked and drilled fairing for cables.